EXFO    Quebec G1M 2K2  Canada
Mar 24, 2009 Single-channel PSO-101 enables eye-diagram analysis and pattern visualization within existing high-speed optical networks, while PSO-102, offered in dual- or quad-channel versions, is built for next-generation networks with advanced modulation schemes. Bit rate-independent test solutions can measure phase- and amplitude-modulated signals with measurement bandwidth of more than 500 GHz. Software includes mask-hit analysis and data filtering for compliance testing of optical transceivers.

Jive Software    Portland, OR 97204
Mar 24, 2009 Jive SBS v3.0 Social Business Software application suite allows teams of people from inside and outside enterprise to connect, communicate, and collaborate. It consists of employee engagement, sales and marketing, product innovation, and support center components and offers Bridging function for centralized view across employee, customer, and partner marketplaces. Data analytics and social bookmarking capabilities are also included.

SolarWinds    Austin, TX 78746
Mar 24, 2009 Offered as collection of real-time network monitoring tools, Engineer's Toolset v10 lets network engineers address network issues from network discovery, configuration management, and fault monitoring to performance monitoring and NetFlow analysis. Its included Workspace Studio drag-and-drop environment conserves time by allowing users to create custom troubleshooting environments and save them for future use and sharing between network professionals within IT environment.

Esco Micro Pte Ltd    Singapore 486777  China
Mar 24, 2009 Equipped with ergonomic and intuitive interfaces, Isotherm® Laboratory Ovens and Incubators utilize Solaris(TM) Pre-Heat Chamber Technology for temperature uniformity. Heat is transmitted into the chamber via 4-zone heated air jacket, and VentiFlow(TM) Ventilation System offers adjustable fan speed and air exchange rates to meet application requirements. Also included, SmartSense(TM) Microprocessor PID Controls regulate temperature to user set-point and facilitate access to data.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 24, 2009 Capable of winding film in widths from 80-140 in. with single or dual winder configuration, PAC 60 uses center shaft support for 3 in. cores to wind multiple slit rolls to 30 in. OD, while 40 in. rolls are wound on 6 in. shafts. It comes with motorized roll cart and shaft puller fully integrated into PLC-based controller, which reduces operator lifting of shafts and promotes winding automation. For stretch film, lay-on roll eliminates air and improves film relaxation prior to winding.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 24, 2009 Black Clawson machinery is available with multiple pelletizing features, such as air ring pelletizing system that enables cutting of materials that should not come into contact with water quench media or those with low heat removal requirement. Also, debottlenecking retrofits are available to increase production capacity utilizing X model version. Pelletizer die plate design promotes throughput rate proportional to die plate orifice holes.

ITT Interconnect Solutions    Santa Ana, CA 92705
Mar 24, 2009 Featuring high-grade PBT housing and copper alloy contacts, APD 1, 7, and 51-way Connectors resist high vibration and attack by aggressive liquids. Secure connector coupling is assured with bayonet mating and secondary contact locking. With max current per contact of 70 A, useable wire sizes from 0.25-50 mm², and IP69K rating, RoHS-compliant connectors meet DIN 72585 requirements and are suited for off-road vehicles, boats, industrial automation, and defense applications.

Emerson Network Power    St. Louis, MO 63136
Mar 24, 2009 With 90-264 Vac universal input, 24 Watt Model AD2412N3L produces fully regulated 12 V output. Unit features 3-pin IEC320 AC input receptacle with safety-ground leakage current maximum of 250 µA, and delivers DC output via fixed cable fitted with 2.5 mm barrel plug. Offering 82% efficiency, external adapter includes switching regulators for switched-mode operation, built-in EMI filter, and automatic recovery to protect against overvoltage and overpower conditions.

Ingersoll-Rand Co., Air Compressor Group    Davidson, NC 28036
Mar 24, 2009 Ingersoll Rand X-Series System Automation eliminates inefficiencies of operating multiple compressor systems by managing up to 12 positive displacement compressors simultaneously. Managing compressors of different capacities and types in any combination/configuration, it offers several methods to optimize efficiency. Automation features include energy control capability, measuring of pressure change to add capacity when required, and visualization tools for system/equipment monitoring.

Ingersoll-Rand Co.    Bryan, OH 43506
Mar 24, 2009 Available in 1½, 2, and 3 in. discrete port sizes and with suction lift and flow rates up 217 gpm, Pit Boss(TM) air-operated diaphragm pumps meet needs of mining, sump, and construction operations. Flow passages enable transfer of fluids with particles up to 1 in. dia, while removable screened inlet keeps foreign particles out to eliminate failure related to pumping debris. Other features include integrated base plate and one-way exhaust check valve.

SteriLab, Inc.    Naples, FL 34103
Mar 24, 2009 Available in 3 sizes suitable for biopsies and autopsies, LABboards(TM) Cutting Boards are made from heavy-duty polyethylene coated SBS paperboard and are printed with metric measurements as well as centimeter field grid. Edges can be folded up to contain fluids. Supplied in bulk packs, boards can be thrown out after each use to eliminate surface contamination risks, rinsing, and sanitizing.

L.S. Starrett Company    Athol,, MA 01331
Mar 24, 2009 With teeth that cut in both directions, Dual Cut(TM) Jig Saw Blades provide clean cuts on both sides of workpiece. Model BU3DC is for straight and curved cuts in material ranging from ¼-1 1/8 in., while Model BU2DCS is for cut-outs, contours, and more complex cuts in material from 5/32-¾ in. Blades are suited for cutting fiberboard, laminates, mixed material, soft woods, hardwoods, and coverings.

Melexis Inc.    Concord, NH 03301
Mar 24, 2009 Model MLX81200 incorporates TruSense technology, which combines reluctance measurement with BEMF sensing for detection and tracking of the rotor position. SineDrive motor control allows shaping motor current to optimize efficiency and torque ripple for each motor, making it suited for applications like engine cooling fans and HVAC blowers. Features include 16 bit microcontroller, 30 Kb of flash program memory, 2 Kb SRAM, voltage regulator, and on chip RC oscillator.

Amacoil Inc.    Aston, PA 19014
Mar 23, 2009 Model RS linear drives feature adjustable axial thrust as well as pitch settings of 0.1, 0.2, 0.3, 0.4, or 0.5 times shaft diameter. Side thrust and linear pitch will not vary when other is adjusted, simplifying process of finding settings that will enhance smooth linear movement and overall optimum drive function. Units achieve linear speeds of up to 5 fps, over distances of up to 13 ft, with axial thrust up to 500 lb. They are available in 7 shaft diameters from 10-60 mm.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Mar 23, 2009 Using TechPac 2D System, designers can specify manufacturing processes to be used and sequences of operations to be followed at all stages of shoe production. Program helps ensure that design is produced exactly as specified and to required delivery schedule. It incorporates basic 2D engineering capabilities, plus comprehensive text functionality, with font, color, and scale formatting options. Part geometry, models, and images can be imported into documentation from Delcam CRISPIN design software.

Linemaster Switch Corp.    Woodstock, CT 06281
Mar 23, 2009 Designed with formed steel cover and polymeric base, Mini-Varior Potentiometer Foot Switches are available with SPDT auxiliary snap switch that operates at beginning of treadle stroke. Units are suitable for variety of equipment including welding equipment, potters wheels, electric vehicles, or anywhere variable control of motor is required. Resistance value of potentiometer must be specified by customer.

Lowell Corp.    West Boylston, MA 01583
Mar 23, 2009 Supplied in plastic carrying case, 3 wrenches individually and uniquely feature 1¼ x 1 1/16 in., 1 1/8 x 15/16 in., and 7/8 x ¾ in. hex sockets. Each wrench is 12 in. long and incorporate Bolt-Thru feature that lets workers tighten nuts on long bolts and any length of threaded rod. While handles and sockets are of heavy-duty construction and coated with electrostatic epoxy paint, ratchets feature reversing control in head and are semi-enclosed to minimize fouling.

Harris    Tyrone, GA 30290
Mar 23, 2009 Featuring 1-piece side walls and no welded joints, Grizzly(TM) T100 240-PF provides shear and baling forces of 200-240 tons and ram face pressure of 186 or 283 psi. System processes aluminum/tin cans, high-grade paper, corrugated cardboard, wooden pallets, PET, HDPE, copper, and some non-magnetic ferrous and select ferrous materials. Additional features include externally adjustable Smart knife(TM) system, flooded suction pump hydraulic system, and self-aligning clevis mount hydraulic cylinders.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Mar 23, 2009 Capable of viscosity, yield stress, and creep measurements, RS Portable Rotational Rheometer can operate in lab, on production floor with 115 or 230 V, or in field with rechargeable battery. Built-in battery pack can be recharged by plugging instrument into power receptacle. Equipped with heavy-duty lab stand and handle, rheometer offers both controlled stress and controlled rate test modes. Cone/Plate Accessory is available for measuring small sample volumes.

Raymond Corporation, The    Greene, NY 13778 0130
Mar 23, 2009 CHEP® Blue Guardian® lift truck accessory minimizes damage to palletized products and packaging by redirecting impact force from lift truck to center block of pallet. Main housing frame is manufactured from impact-resistant carbon steel and is designed to maximize visibility during operation. Suited for mounting to ITA Class II fork carriages, unit also incorporates energy-absorbing polyurethane bumper that prevents contact with load.