Ethernet Direct    Newburyport, MA 01950
Aug 29, 2008 Available in DIN rail mounted rugged housing and conformal coated protected circuitry with extended temperature tolerance of -40°C to 80°C, Iguana Series IUE-500EC Industrial 5-port Unmanaged Ethernet Switch supports IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, and MDI/MDI-X auto-sensing RJ45 ports. Unit supports 10-30 Vdc power input and 3,000 Vdc surge (EFT) protection for power line. It offers Ethernet isolation of 1,500 Vrms and frame ground for EMS protection.

FUTEK Advanced Sensor Technology, Inc    Irvine, CA 92618
Aug 29, 2008 Designed for measuring Mx, My, and Fz loads, Model MTA505 Multi Axis Load Cell offers capacity options of 10,000 lb (Fz), 2,000 in.-lb (Mx), 2,000 in.-lb (My) and 25,000 lb (Fz), 10,000 in.-lb (Mx) 10,000 in.-lb (My). It is made from 17-4 SS material and utilizes Strain Gage Technology for accuracy. Applications include rehabilitation and physical therapy where multiple forces of muscles/joints need to be measured, automated production lines, and robotic applications.

Crystek Corporation    Ft. Myers, FL 33913
Aug 29, 2008 With control voltage range of 0.5-4.5 V, Model CVCO55FL-0075-0085 VCO features typical phase noise of -123 dBc/Hz at 10 kHz offset, output power of +9.0 dBm, and second harmonic suppression of -20 dBc. Input voltage is 5 V, with maximum current consumption of 25 mA, while pulling and pushing are minimized to 0.50 MHz and 0.50 MHz/V, respectively. Available in 0.5 x 0.5 in. SMD package, unit is suited for digital radio equipment, fixed wireless access, and base stations.

Specialty Equipment    Houston, TX 77055
Aug 29, 2008 Designed to transfer empty drums from conveyor and stack them onto pallet, Model EDP-500 air-over-electric system loads 30-55 gal steel, fiber, or poly drums in 4, 5, or 6 drum pattern, onto pallet. Average load time is 4 drums/minute, and automatic pallet dispenser is available to discharge waiting pallet. Featuring steel components and all-welded construction, unit has selector switch to keep transfer carriage in home position allowing tall IBC to pass through.

Technifor, Inc.    Charlotte, NC 28273
Aug 29, 2008 Providing high contrast 2D Data Matrix codes, logos, barcodes, and human readable text at high speeds, Model TF420 fiber laser marking unit is capable of printing on difficult materials such as cast aluminum and carbide as well as consumer products like cellular telephones and medical devices. It features compact marking head completely sealed and enclosed in protective cast aluminum case. Air cooled unit has source life MTBF of 100,000 hr, and requires no PC during operation.

JWC Environmental    Costa Mesa, CA 92626
Aug 28, 2008 Available as optional feature on Finescreen Monster®, Bandscreen Monster®, Chain and Rake Monster®, and Catenary Monster(TM), Monster Blind Diagnostic System detects percent blinding factor of screen and notifies plant operational staff about screen performance. System detects heavy solids loading, need to adjust cleaning brush, or need to replace spray nozzle. It can also control additional cleaning steps, such as hot water spray wash, to optimize screen's efficiency.

Kaivac, Inc.    Hamilton, OH 45011
Aug 28, 2008 Designed for No-Touch Cleaning System, Dry Vacuum Accessory includes 2 vacuum heads as well as canister to hold disposable filter. Vacuum removes soil from tile, linoleum, hardwood, and other hard surfaces as it helps protect air quality. Equipped with airflow-driven beater bar, KaiTurbine(TM) head cleans carpeting thoroughly and, because it does not require electrical power, safely cleans damp surfaces. DryAuto(TM) hard surface head handles large floor areas such as hallways.

MacDermid Autotype, Inc    Schaumburg, IL 60173
Aug 28, 2008 At 54, 64, and 74 in. wide, Quadra-III systems utilize versions of Roland XJ printers with features specific to generation of film positives/negatives. Software drivers promote registration and length accuracy, while friction-free film transport and low-tension take-up reel promote film-to-film fit. In addition to belt-driven head carriage, systems employ symmetrically spaced grit rollers and 3 mm ink feed lines. Printing speeds reach 80 ft²/hr, and halftone capability is 35-75 lpi.

Applied Motion Products, Inc.    Watsonville, CA 95076
Aug 28, 2008 Measuring 5.0 x 3.0 x 1.75 in., SV Series delivers up to 7.0 A rms continuous or 14.0 A rms peak output current from 24-80 Vdc power supply. Units come with protection against over and under voltage, over-temperature, motor shorts, and motor open phase. Available with RS232 or RS485 communication interface, drives provide 8 digital inputs, 4 digital outputs, and 2 analog inputs. Digital DQ current loop with sine commutation delivers smooth, quiet motion.

ACS Motion Control    Plymouth, MN 55447
Aug 28, 2008 Featuring SPiiPlus PLC and CANOpen master support, RoHS-compliant SPiiPlus SAR-LT 2-, 4-, 6-, or 8-axis controller provides opto-isolated single-ended position event generator and position registration I/Os. It can be implemented in systems with servo/step motors and supports Hall Commutation. Mode support includes point-to-point, jog, segmented, master-slave, and arbitrary path with PVT cubic interpolation. Unit also offers third-order profile generation with on-the-fly changes.

Parker Fluid Control Division    New Britain, CT 06051
Aug 28, 2008 Acting as component of truck's auxiliary equipment, Industrial Climate Control features on/off valve that regulates heating and cooling systems, even after engine has been shut off. Two-way, normally closed or normally open valve is available with orifice diameter of ½ in. or larger and process connection of ½ in. NPT. Constructed of brass with FKM and fluorocarbon seal, valve operates with Cv factor of 4.0 or better and features bubble-tight internal and external leakage.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Aug 28, 2008 Built with features that maximize production efficiency, Material Master(TM) low-headroom unit has 145 in. overall height and can be custom-designed to fit individual application requirements. It incorporates 316 stainless steel Seal-Master(TM) bag spout access chamber, 316 stainless steel product contact surfaces, and heavy-duty Flo-Master(TM) massaging system. Also, low-headroom electric hoist with motorized trolley allows bulk bags to be safely loaded without forklift.

Thomas & Betts Corp.    Memphis, TN 38125
Aug 28, 2008 Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive displacement fuel metering pump, and automatic thermostat-controlled operation.

Equipment Solutions, Inc.    Sunnyvale, CA 94086
Aug 28, 2008 Suited for precision optical positioning applications, LFA-1012 Linear Focus Actuator features zero-translation tangential flexure. Other features include clear aperture, 0.394 in. stroke length, and standard 12 mm optics mount or optional DIN mount. Frictionless, closed loop, non-contact, sub-micron resolution linear displacement sensor is also included, lending to 150 nm positioning resolution. Short- and long-term repeatability are 200 nm and 50 ppm/1,000 hr, respectively,.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Aug 28, 2008 Fitted with direct pressure media delivery module, Model 8-EP is suitable for processing components with large amount of surface area and for surface treatment operations such as descaling, etching, coating removal, and surface preparation. Consisting of cyclonic separator linked to ASME-certified pressure vessel, pressure-blast module is attached to rear of blast cabinet. Most types of dry blast media can be used, including plastic grit, glass beads, and fast-cutting mineral grit.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Aug 28, 2008 Mounted in any orientation in tank, tee fitting, or any compatible threaded port, Series CLP determines presence of conductive liquid at set level by sensing conductivity. Probes allow for measurement of conductivity between probe fitting and end, which is isolated by ceramic insulator, or between ends of 2 probes. Offered with ½ in. NPT process connection, probes feature solid stainless steel end for resistance to heat and corrosion.

DE-STA-CO Industries    Madison Heights, MI 48071
Aug 28, 2008 Offering max holding capacity from 295-1,680 lb, horizontal handle hold-down action clamps of 2013, 2017, 2027, and 2037 series incorporate ergonomic handle grip, 2 flanged washers, and spindle assembly. Straight base options are available, and knob on end of open U bar prevents spindle slippage. While low pivot points provide for perpendicular clamp force, straight downward action helps prevent workpiece movement in fixture. Hand clearance in open position eliminates pinch points.

DE-STA-CO Industries    Madison Heights, MI 48071
Aug 28, 2008 With max conveyor length of 16 ft and chassis widths from 1.77-5.5 in., light-duty DCM Series handles part widths up to 4.6 in. and can transport up to 44 lb. Systems are driven by regulated, brushless 24 Vdc motor with variable speed and selectable direction. Medium-duty conveyors, operating with single or dual belt, come in chassis widths from 2.4-9.8 in., while heavy-duty models, driven by 230/480 V spur gear motor, come in widths from 7.9-31.5 in. and transport up to 275 lb.

Hilti Inc.    Tulsa, OK 74121
Aug 28, 2008 For firestopping top of wall, expansion, and edge of slab/curtain wall joints, CP 672 Fast Cure Speed Spray is paintable and designed for use with concrete floor assemblies. Applicable by spray or brush, water-based mastic makes spills and over-spray quick to clean up. Containing no halogens, solvents, or asbestos, spray meets LEED requirements for indoor environmental quality. Product can be applied with SprayTech EPX 2355 or EPX 2555 sprayers.

GE Company, GE Lighting    Cleveland, OH 44112
Aug 28, 2008 Designed for use on instant start ballasts and programmed rapid start ballasts, 2-ft GE F17 Watt-Miser® lamps output 3,132 initial lumens and consume 41 system watts in 3-lamp fixture. Similarly, 3-ft GE F25 Watt-Miser® lamps output 5,024 initial lumens and consume 58 system watts. Both TCLP-compliant lamps deliver 24,000 hr rated life at 12 hr/start to extend re-lamping cycle. Color rendering index is 80 for 5,000K lamp, 82 for 4,100K lamp, and 85 for 3,000K/3,500K lamps.