Komatsu America Corp.    Rolling Meadows, IL 60008
May 21, 2009 Models D51EX/PX-22, D61EX/PX-15, and D65EX/PX/WX-15 are available with Parallel Link Undercarriage System (PLUS), which wears evenly so that machine provides close to 100% usage of undercarriage components. It requires no maintenance between track changes other than track tension adjustments and no more bushing turns. Strutted link provides solid base for box section type track, individual links can be replaced in field, and segmented sprockets are designed to shed material.

Momentive    Albany, NY 12211
May 21, 2009 Designed to replace regional fluids, Element14 PDMS 5 and PDMS 10 are low-viscosity polydimethylsiloxane polymers with temperature and oxidative stability, spreadability, lubricity, compressibility, low odor, low flammability, and non-oily, soft feel. Fluids are suited for variety of industrial applications, including polishes, paint and coating additives, hydraulic fluids, electrical insulating fluids, lubricants, water repellents, and mold release agents.

Varian, Inc.    Palo Alto, CA 94304
May 21, 2009 StratoSpheres(TM) DNA Synthesis Cartridges produce small to medium sized oligonucleotide strands required for use in DNA amplification, sequencing, and hybridization. Polystyrene packing provides high-throughput synthesis capabilities, while hydrophobic nature promotes production efficiency by maximizing yield of full length product. Two synthesis scales, 40 and 200 nmol, enable biochemists to make oligonucleotides in various lengths to meet exact needs.

Data-Linc Group    Bellevue, WA 98006
May 21, 2009 With NET 620 Serial to Ethernet Bridge, users can integrate serial connected devices into Ethernet networks without complicated network interface. No special PLC configuration is needed to integrate DF1 or ModBus RTU devices into EtherNet/IP or ModBus TCP/IP networks. Device can be configured using supplied SetLinc(TM) utility software or web browser, and for most installations, user must only set IP address and port speed.

Hartmann Electronic    Springfield, OH 45505
May 21, 2009 PSB PICMG 2.16-based platform consists of 84 HP 9U card rack, 5 fans, 16-slot backplane, and 4 redundant 250 W plug-in power supply units. Together, 5 independent temperature sensors and 2 Intel shelf managers provide adapted air flow. Fan arrangement ensures uniform flow under assemblies, and fan drawer can be replaced during operation. System slots are assigned to Nos. 1 and 16, and switch slots to 8 and 9. Routing of differential pairs supports transfer rates over 1,000 Mbds.

Quickparts    Atlanta, GA 30346
May 21, 2009 Offering chemical resistance, ULTEM material is suited for any digital manufacturing project, from functional prototypes to jigs and fixtures, to low volume production runs utilizing Fused Deposition Modeling process. With V-O rating for flame, smoke, and toxicity, ULTEM 9085 is certified for use on commercial aircrafts and has proven successful for electric/electrical components, microwave applications, pump and valve parts, and marine and automotive manufacturers.

American Portwell Technology    Fremont, CA 94538
May 20, 2009 Based on Intel® EP80579 Integrated Processor with QuickAssist Technology, CATO-2010 measures 9 x 7.76 x 1.65 in. and supports DDR2 800/533 ECC or non-ECC memory up to 4 GB. Network appliance platform, along with storage support via Compact Flash and Disk On Module, offers range of interfaces: 4 onboard GbE ports; 3 GbE interfaces via RGMII with optional hardware security acceleration; PCIe x1 GbE interface; and 2 optional segments Ethernet bypass. Security services are also included.

American Industrial Systems, Inc.    Irvine, CA 92614
May 20, 2009 Powered by Microsoft® Windows Embedded OS, 42 in. Smart Module Digital Signage Displays are wrapped in steel housings, suited for outdoor and high traffic environments. Built-in light sensor auto-adjusts brightness in respect to ambient light conditions. Units feature 1.8 cm bezel, which when bundled with CAT 5 extender module, makes displays suitable for video/wall tile systems. Interactivity is optimized by adding touchscreen, motion sensors, or pushbutton technology.

Interpower Corporation    Oskaloosa, IA 52577-0115
May 20, 2009 Equipped with O-rings for ingress protection, Metric Strain Reliefs include dome models made of nickel-plated brass, and flex models made of nylon. Halogen and phosphorous free, strain reliefs offer thread specifications and pitch of M10 x 1.5 mm, M12 x 1.5 mm, M16 x 1.5 mm, and M20 x 1.5 mm.

MTS Systems Corp. - Sensor Div.    Cary, NC 27513
May 20, 2009 Available with linearity correction option, Temposonics® R- and G-Series are shock- and vibration-resistant solutions that provide 20 microns or better linearity for both rod- and profile-style sensors. This optimizes measurement signals accuracy and minimizes system-related delays, affording precise and dynamic control. While R-Series provides absolute, linear position measurement and non-contact sensing technology, G-Series provides measurements in analog or digital outputs.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
May 20, 2009 Excalibur 7018-A1 MR is recommended for welding 0.5% molybdenum steels, Excalibur 8018-B2 MR is suited for 1.25% chromium, and Excalibur 9018-B3 MR is designed specifically for welding 2.25% chromium and 1% molybdenum steels. All are designed for all-position welding of low alloy steels and are capable of exceeding AWS minimum strength requirements after long term post-weld heat treatment. Low hydrogen stick electrodes feature 3/32 in. dia and are 12 in. long.

Vecoplan, LLC    Archdale, NC 27263
May 20, 2009 Equipped with 10.25 yd³ hopper featuring 70 x 82 in. opening, RG70PK securely destroys large volumes of unwanted products and electronic scrap as well as traditional paper documents. HiTorc(TM) Magnetic Pulse Drive delivers maximum torque across speed range, full speed control, reversing action, and controlled stop function. Built with extreme-duty construction, machine cross shreds in one pass to deliver consistent particle sizes determined by screen.

Motolight    Cincinnati, OH 45215
May 20, 2009 Universal Tail Light/Brake Light Set enables motorists to see motorcycle riders from rear. Featuring durable housing, set includes 48 red LEDs per housing and installs behind license plate, with wiring installed using Posi-Taps. Lights increase in brightness when brakes are applied. They are available in chrome, brushed metal, polished metal, and black powder coat finishes.

Thermo Fisher Scientific    Waltham, MA 02454
May 20, 2009 Intended for pharmaceutical companies and contract research organizations involved in DMPK studies, Watson LIMS 7.4 allows researchers to perform incurred sample reanalysis on individual sample basis, and eliminates previously required mandatory repeat runs for bioanalytical samples. ISR reporting features provide comparison methods with built-in calculations. Users can manage status of samples, and import samples and sample-related information from external applications.

Cablecraft Motion Controls    New Haven, IN 46774
May 20, 2009 Offering true 4 in. minimum bend radius, Cablecraft Push-Pull Blue Max(TM) Control Cables are lubricatd for life and have binder wired, PTFE core conduit. Outer jacket is resistant to abrasion, gasoline, diesel, and various corrosive chemicals. Suited for short runs as well as long runs with complicated routing, cables are intended for marine throttle controls, marine trim controls, marine fuel shut off, and various chassis and high-performance racing applications.

SICK, Inc.    Minneapolis, MN 55438
May 20, 2009 Sensor W15 uses custom ASIC that incorporates OES3 technology, which enables W15 to ignore stray background reflections, detect multi-colored/shiny objects, and exhibit immunity to ambient light. Also, flush mounting reduces setup time and prevents disruption of product flow. Multiple customization options are available, including cable cut to length, special connectivity, sensor pre-mounted to bracket, and kitting together with bracket and reflector.

Komar Industries, Inc.    Groveport, OH 43125
May 20, 2009 Suited for construction and demolition sites, EM-PSC Auger shreds and compacts everything from pallets to white goods to dry wall to cement blocks. Electro-mechanical unit, equipped with 100 kW generator, is mounted on roll-off machine bed. Its 7.4 yd³ hopper accepts most kinds of construction debris, and 40 hp electric motor drives auger screw that shreds/compacts with 178,000 lb-ft of force. Unit fills 40 and 50 yd³ roll-off containers with typ loads of 8-14 tons.

Organomation Associates, Inc.    Berlin, MA 01503
May 20, 2009 Featuring aluminum heat block designed to accommodate 96-well microtiter plate, MICROVAP(TM) uses array of 2 in. long, 19-gauge needles, each centered over individual well, to provide separate stream of nitrogen for each sample. Consuming 20-30 lpm of nitrogen, evaporator is equipped with electronic temperature controller from ambient to 100°C, 250 W heater, and epoxy-coated aluminum base, which stands up to laboratory solvents.

Pearse-Bertram, Inc.    Bloomfield, CT 06002
May 20, 2009 Equipped with Leeson(TM) electric motors, Hydraulic Power Units utilize Daman(TM) D03 or D05 sub-plates with Sun(TM) relief, and Magnaloy(TM) D03 or D05 bar manifolds and pump mounts with flexible drive couplings. Stauff(TM) pressure gauges include shut-off valves, suction strainers, and return line filters with dirt indicator. Available with 5-30 gal reservoirs, units operate at 1-10 gpm with pressures from 100-3,000 psi. Level switches, heat exchangers, pressure filters, and tank heaters are optional.

Pro-Link, Inc    Canton, MA 02021
May 20, 2009 Made from 100% recycled polyester material, Maroon Strip CF Pad suits all kinds of floors and floor finishes including wood floors covered with water-based urethane finishes and stone or terrazzo floors. Measuring 3/8 in. thick, pad follows contours of floor.