Magna-Power Electronics    Flemington, NJ 08822
Apr 30, 2009 Housed in 2U package, XR Series includes 54 programmable models that accept input voltage of 208-480 Vac at 50, 60, and 400 Hz. Units offer power ratings of 2, 4, and 6 kW and current ratings up to 375 Adc. Utilizing additional power processing stage to deliver current-fed power processing technology, devices can operate under short-circuit and open-circuit conditions. All include 37-pin isolated 0-10 V external I/O to monitor and control all functions.

Parker Hannifin Corp.    Oxford, MI 48371
Apr 30, 2009 Axial piston pumps of 45cc/rev P1/PD Series are optimized for medium-pressure open-circuit mobile (P1) and industrial (PD) applications. Available with optional torque limiter or as full power through-drive version, series is rated for continuous operation at pressures to 280 bar. Operating efficiency lowers electricity demands, while noise output level can reduce or eliminate need for insulation and help comply with OSHA hearing conservation standards.

austriamicrosystems AG    Premstatten   Austria
Apr 30, 2009 For linear motion sensing, AS5311 utilizes 2 mm multipole magnetic strip and provides 1.95 µm resolution signal at incremental output and 488 nm signal at serial output. It uses multipole magnetic ring for rotary motion sensing, with incremental output resolution of 10 bit/pole pair and traveling speed of up to 650 mm/sec. Operated with 3.3 or 5 V supply voltage, unit operates in temperatures from -40 to +125°C. Onboard diagnostics monitor placement of magnet above device.

Power Integrations, Inc.    San Jose, CA 95138
Apr 30, 2009 Reference Design Kit, RDK-203, offers dual-rail power supply with high loop bandwidth and peak power for 5.1-channel home audio systems with up to 650 W audio power rating. Using this solution, developers can meet new and emerging standby power usage regulations for consumer A/V equipment. Kit is based on PeakSwitch PKS607YN, and circuit consumes less than 0.9 W at 240 Vrms input. This exceeds power efficiency regulations established by ENERGY STAR, CEC, EISA, EC EuP, and EC CoC.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Apr 30, 2009 Comprised of TASKMASTER® grinder, stainless steel shaftless screw screen, and control system, SPIRALIFT SL fine screens, washes, transports, and compacts channel-borne wastewater solids while leaving essential organics in flow. PLC-based control system uses flow level data to cycle screw to minimize power and wear. SPIRALIFT can be supplied with choice of electric or hydraulic drives and variety of channel widths, flow, and lift requirements.

Beckhoff Automation LLC    Minneapolis, MN 55337
Apr 30, 2009 Based on 100 Mbit/s Ethernet and IP protocol, CP-Link 3 enables users to connect up to 255 Ethernet panels or panel PCs with one industrial PC. Display contents are captured by virtual graphic adapter in host PC and sent using Ethernet to one or more Ethernet panels with Windows OS. For display communication, TCP/IP or UDP/IP can be configured, depending on operating mode. Networking can be done using standard CAT 5 cables, which are suitable for drag chains.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 30, 2009 Offered in Split and Solid Core configurations, Series SCS are suited for monitoring whether fans, pumps, or motors are operating. Current flowing through core of device powers circuit, and all models have built-in, solid-state output. Featuring UL and CE approvals, series is designed to facilitate installation and comes in ABS plastic enclosure with UL, V-O flammability rating. Optional LEDs and 10 A relay modules are available.

Permabond    Somerset, NJ 08873
Apr 30, 2009 Appropriate for all Permabond cyanoacrylate adhesives, Permabond CSA-NF speeds cure on very dry or acidic surfaces and on porous surfaces to cause cure prior to adhesive wicking into substrate. It can also quicken surface cure to clear non-tacky finish with no white residue. Since Permabond CSA-NF is non-flammable, it eliminates shipping and safety concerns related to flammable solvents.

Label-Aire Inc.    Fullerton, CA 92833
Apr 30, 2009 Equipped with vacuumized wrap transport belt and single 3015-ND Wipe-On label applicator, stainless steel/cabinet-based Inline Series 5100 Vacuum Wrap labeling system is designed to apply front and back labels to round bottles without needing second label applicator. It can apply labels to spinning bottles at speeds of up to 60 products/min, with placement accuracy of ±1/32 in., maintaining proper orientation.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Apr 30, 2009 Developed to support worker safety, 39 Series Nesting Trucks help promote compliance with OSHA's general duty clause 29 USC 654 covering work positioning. They come with ergonomic, spring loaded platform that rises as goods are removed to provide workers with access to materials or products while maintaining consistent height that minimizes bending and reaching. When empty, carts can be nested in stacks several carts high for space-saving storage.

Calex Mfg. Co., Inc.    Concord, CA 94520
Apr 30, 2009 Featuring internal regulator and reference circuit to make output current independent of power supply variations, Model 930 accepts unregulated supply voltage from 12-32 V. Output current can be programmed by 1,000 W potentiometer or by voltage input, providing linear adjustment of output current from 0.5-50 mA. Extended range of 5-500 mA is available with use of MK 296 and MK 296HP mounting kits, which are for resistive or voltage programming of unit.

ERICO    Solon, OH 44139-2631
Apr 30, 2009 Compliant with NFPA® 13 standards, CADDY® range of products are suited for use with service pipe up to 10 in. and facilitate quick installation. They feature long-lasting, corrosion-resistant finish. Structural attachments include bar joist adaptor, I-Beam adaptor, and universal structural attachment/multi attachment. Sway braces are available in lateral or longitudinal and lateral versions.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Apr 30, 2009 Designed for use by multiple operators, rugged RS Portable Rheometer can operate in lab, on production floor using 115 or 230 V, or in field using built-in rechargeable battery pack. Coaxial cylinder rheometer is capable of viscosity, yield stress, and creep measurements and offers both controlled stress and controlled rate test modes. Unit comes with heavy duty lab stand and has convenient handle for moving instrument whenever necessary.

Hirschmann Automation & Control, Inc.    Chambersburg, PA 17201
Apr 30, 2009 Available with 8 or 9 Fast Ethernet ports, 4 of which supporting PoE, Fast/Gigabit Ethernet Switch allows for adjusting power supply for each port, individually. RJ45 or SFP ports (10/100/1000 Base TX) are provided for Gigabit uplinks and can be equipped with SFP fiber modules (1000 Base FX/SX/LX/LH). Switch status can be locally retrieved through signaling contacts, with detailed information accessible for display using standard web browser.

Samtec, Inc.    New Albany, IN 47151 1147
Apr 30, 2009 Rated 9 GHz DP, high density .635 mm hermaphroditic terminal/socket strip connector LSS Series is available with up to 50 pins/row in double-row design and with mated stack heights ranging from 6-12 mm. Self mating connector system offers insertion depth of 2.36 mm, contact wipe of 1.78 mm, and includes standard friction lock for increased normal force and shroud with audible click when properly mated. Application specific locking clip is also available.

J. W. Winco, Inc.    New Berlin, WI 53151
Apr 30, 2009 Available in 3 models, series GN 711 RoHS compliant self-adhesive rulers are offered in 100, 200, and 300 mm lengths. Stainless steel version is scale etched and 0.6 mm thick, while white plastic and transparent plastic versions are scale printed and are 0.3 mm thick. Six different figure sequences are available and indicator arrows in all 3 versions can be ordered separately.

Wilbrecht LEDCO Inc., A Div. of Microprecision Electronics Inc.    Saint Paul, MN 55108
Apr 30, 2009 Fitted with dual nitrile O-rings and internally potted to IP66, environmentally sealed CRM series are designed for control panels, instrumentation, and front panel fault indication in outdoor environments. Mounting torque is rated at 20 ± 2 in.-lb and LEDs can withstand push-out force of 10 lb. Designed to rear mount in .315 in., D-shaped hole, series is available with daylight readable single color LEDs, and bicolor, tricolor, full color RGB, and blinking LEDs.

Parker/Texloc Div. of Parflex    Fort Worth, TX 76106
Apr 30, 2009 Stainless Steel Braided Convoluted Hose Assemblies are manufactured in sizes from ¼-4 in. ID depending on style and operate in temperatures up to 500ºF. SCW hose is standard wall PTFE convoluted assembly, where as SCWV is heavy wall PTFE, open pitch style for kink resistance and reduced permeation. Heavier wall convoluted tubing can handle vacuum applications at elevated temperatures.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Apr 30, 2009 Featuring sharp, tactile response, right-angle TL1250 offers mechanical life of 50,000 cycles minimum. It has contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW at 5 Vdc, insulation resistance of 100 MW minimum at 100 Vdc, and dielectric strength of 250 Vac for 1 min. Available with blue, red, green, and yellow single LED options, switch features 0.2 ±0.1 mm travel, 5 msec maximum bounce, and operating temperature of -20 to +70°C.

KNF Neuberger, Inc.    Trenton, NJ 08691-1810
Apr 30, 2009 Designed to transfer, evacuate, or compress air or gases for analytical, medical, and all portable instruments, KNF NMS020 micropump can deliver high-performance flow rates up to 1.8 Lpm, vacuum up to 15 in. Hg, and pressure up to 7.5 psig. It features diaphragm for ensuring pumped medium remains pure and contaminant-free and corrosion-resistant wetted parts to withstand harsh conditions. Customizable pump is powered by brush or brushless DC motors.