Interstate Specialty Products    Sutton, MA 01590
Dec 01, 2011 Unaffected by most corrosive liquids, vapors, and gases, Interstate PTFE gaskets, seals, washers, and related parts can be made from virgin or filled PTFE, PFA, TFM, and expanded PTFE with glass fiber, carbon, or graphite. Chemically inert products, featuring one-piece construction, operate from -400 to +500°F, are naturally slippery, and can be die-cut to specification in sizes from 0.250-60 in. dia x 0.003-0.250 in. thick. Parts can also conform to FDA, AMS, and military specifications.

WAGO Corp.    Germantown, WI 53022
Dec 01, 2011 Featuring 2-position, DIN rail mount metal housing with front-facing status LEDs, EPSITRON® 787 Series PRO Power Supplies include Energy-Saving mode that deactivates output when not required via remote control. TopBoost accommodates circuit breakers for individual load circuit protection by providing 50 msec of additional output at 3-6 times rated current. Stage 1 of PowerBoost follows with up to 200% output current for 4 sec, while Stage 2 provides additional 150% output current for 2 sec.

QRP, Inc. a PEM Co.    Leland, NC 28451
Dec 01, 2011 Designed for hold-open and lock-in-place applications, high-performance struts include scissor struts that are qualified for JSFM62 and JSFM64 programs by meeting/exceeding JSFM specifications for tension, compression, and handling loads. Available products also include telescoping, fixed-length, and spring struts as well as hold-open rods. Depending on type, struts can be specified with automatic or manual lock-in features. Secondary safety-locking features are also available.

Kontron    Poway, CA 92064
Dec 01, 2011 Consuming 17 W, microETXexpress®-PV-XT is equipped with 1.80 GHz Intel® Atom(TM) D525 dual core processor and supports up to 4 GB DDR3 system memory. Module provides LVDS and VGA simultaneous graphics support for maximum resolutions of 2,048 x 1,536. Unit includes 5 configurable PCI Express lanes in addition to PCI, I2C, SPI, and LPC bus. Via COM Express® Type 2 connector, module provides 1x Gigabit Ethernet, 8x USB 2.0, 3x SATA II, and optional 1x PATA.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 01, 2011 Designed for critical low differential pressure applications, Series RSM can be configured to monitor positive or negative pressure in protected environments and hospital isolation rooms per CDC guidelines. System includes backlit LCD with GUI that enables access to pressure, security, calibration, and alarm setup. LEDs and local audible alarm alert personnel to system status. Made of NEMA 1 rated fire retardant plastic, monitor displays true differential pressure with 0.001 in. wc resolution.

Keyence Corporation of America    Itasca, IL 60143
Dec 01, 2011 Combining laser scan micrometer, machine vision system, and optical comparator, TM-3000 is compatible with 100% automated high-speed, in-line or off-line measurement and inspection applications. It is available in 3 sensor head sizes and can utilize 2 transmitter-receiver pairs simultaneously. System works in 2 dimensions, measuring up to 16 points within given area, and optimizes speed and precision via sub-pixel processing only in areas or points designated for measurement.

Columbus McKinnon Corp.    Amherst, NY 14228
Dec 01, 2011 Designed to handle challenging applications, Hurricane 360 handles capacities from ½-10 tons and features hand chain cover that rotates 360° to permit use in any direction. This lets workers stay clear of load when making vertical lifts, and Weston-Style Braking System provides positive load control while also lending to performance reliability. Suited for pulling, confined space use, or lifting loads from above, hoist features internal gears and pinions of heat treated steel.

Grieve Corporation, The    Round Lake, IL 60073-2898
Dec 01, 2011 Suited for applications such as preheating and curing powder coatings onto electric motor parts, No. 816 features 54 x 54 x 72 in. workspace and 350,000 BTU/HR installed in modulating gas burner. Recirculating blower (4,200 cfm, 3 hp) provides horizontal airflow to workload, and two 48 in. dia hearths, constructed from rolled angles and covered with perforated metal, carry loads in process. Construction includes with aluminized steel interior and exterior with 4 in. insulated walls.

Ellsworth Adhesives    Germantown, WI 53022
Dec 01, 2011 Engineered to cure with UV and visible light using broad spectrum and LED curing equipment, E-MAX 903-E also features secondary moisture-cure mechanism for ambient cure in shadowed areas. Product offers tack-free cure immediately upon cooling after light exposure. Coating is available in 30 mL syringes, 1 L bottles, and 5 gal cans.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 01, 2011 Supporting plastics injection molding requirements, Type 4021B is designed for simultaneous recording of short duration pressure peaks to 29,000 psi and temperatures to +662°F. Device is available with choice of voltage or current output and incorporates melt pressure sensor with abrasion-resistant stainless steel diaphragm and integral amplifier. Performance characteristics allow sensor mounting directly in material flow, eliminating time lag for real-time process parameter measurement.

Centerline (Windsor) Ltd.    Windsor, ON N9J3T8  Canada
Dec 01, 2011 With SST(TM) Series EP Cold Spray System, metal coatings can be applied at operating pressures from 100-500 psi. Material choices include aluminum and aluminum alloys, Inconel, Invar, MCrAIY, nickel and nickel alloys, stainless steel, titanium, and titanium alloys. System comes complete with portable cabinet, HMI controls, pressurized feeder, and robotic style spray gun.

Allpax Products, Inc.    Covington, LA 70433
Dec 01, 2011 Available for new installations and as retrofit solution, Retort Product Delivery System is suited for small footprint retort rooms that utilize 4-, 6-, and 8-basket horizontal retorts for preparation of shelf-stable food. System features 2-basket shuttle that travels at 240 fpm. Basket coupling system eliminates need for long loading arms, contributing to compact size.

Anite plc    Berkshire   United Kingdom
Dec 01, 2011 Offering comprehensive suite of tools, Development Toolset supports entire wireless device deployment ecosystem, from pre-silicon protocol module development through to systems integration and verification. Device manufacturers can perform complex LTE Multi-RAT Circuit Switched Fallback scenarios, which provide voice support on LTE networks in early stages of LTE deployment, as well as Packet Switched Handover, which performs sustained data transfer across LTE and legacy networks.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Dec 01, 2011 With Hardware/Software Development Kit, engineers can develop 1553 board solution utilizing Total-AceXtreme(TM) MIL-STD-1553 package. Kit includes PCI evaluation board with cable as well as schematic symbols, PCI card reference design schematic, IBIS model, thermal model, and JTAG/BSDL file. It also provides CAD drawing footprints for PADS and Allegro, BusTrACEr(TM) with Application Code Generation for rapid software development, and drivers for Windows®, Linux®, and VxWorks®.

Touchstone Semiconductor    Milpitas, CA 95035
Dec 01, 2011 Supplied in 5-pin SOT23 package, TS1100 has +1.6 to +25 V input common-mode voltage range, 30 µV tight offset, and 1 µA supply current rating. There are 4 gain options available - 25, 50, 100, and 200 V/V - to accommodate application requirements, and gain error is less than 0.5% (max). Suited for low-current, high-side current-sensing amplification, product is specified for operation from -40 to +105°C and is suited for battery-powered, remote, and hand-held portable instruments.

Milacron LLC    Batavia, OH 45103
Dec 01, 2011 Available from 310-4,400 tons, Maxima Servo uses permanent-magnet servo motor in place of standard induction motor or frequency drive, enabling speeds from 0-3,000 rpm in both directions. Two-platen clamping system applies pressure directly to center of mold instead of corners for consistent part quality. Featuring modular design, machine includes dynamic speed control system, energy optimization and monitoring diagnostics, and internal gear pump that runs only when needed.

L-Com, Inc.    North Andover, MA 01845
Dec 01, 2011 Right-angle USB adapters featuring USB type B male to female connectors and USB type mini-B5 male to female connectors solve tight space connection problems. They allow cables to plug into jacks and cables at right angles without causing damaging bends in cable. Availability of 2 exit styles allows right angle to bend in either direction relative to connector into which they are plugged. Type B adapters use 20 AWG power leads, and both styles use 30 µin. gold contact plating.

Walter USA, Inc.    Waukesha, WI 53188
Dec 01, 2011 Offered as special tool with diameters from 5-12 mm dia, Walter Titex XD70 can produce holes up to 70xD in one operation and does not require pecking. Cooling is provided via internal coolant channels, and no special coolant equipment, such as an external high-pressure system, is required. Standard cooling unit, such as those available with any machining center, is sufficient. Respectively, TTP and XPL tip coatings are available for steel and cast iron workpiece materials.

Pulse Systems    Concord, CA 94520
Dec 01, 2011 Capable of milling, turning, boring, and drilling very small features on range of biocompatible materials, CNC Machining Service creates small custom components for medical devices. Company's equipment can machine solid bar materials such as stainless steel, Nitinol, and titanium up to .787 in. diameter as well as tubular or cannulated starting materials as small as .032 in. in outside diameter.

Sumner Mfg. Co.    Houston, TX 77088 4036
Nov 30, 2011 Designed to monitor oxygen levels in welding applications where avoiding oxidation is critical, Ar-Gone Weld Gas Analyzer measures oxygen levels down to 0.01%, while hermetically sealed Argo-Naught Weld Gas Analyzer measures oxygen down to 0.1%. Both units feature replaceable batteries and oxygen sensors. Supplied in nylon case, analyzers include 6½ ft rubber hose with stainless steel probe, rubber aspirator bulb, carrying strap, and operator manual.