Aries Electronics, Inc.    Bristol, PA 19007-6810
May 18, 2009 Available with optional adjustable pressure pad, 27 mm CSP/MicroBGA Test and Burn-In Sockets enable 0.010 in. displacement per revolution of screw, suited for testing thin or ceramic chips without damage. Each pressure pad comes with user-adjustable washer stack in 0.001 and 0.010 in. increments that serves as hard stop to eliminate device over-compression. Contact forces are 15 g/contact on 0.30-0.35 mm pitch, 16 g/contact on 0.40-0.45 mm pitch, and 25 g/contact on pitches of 0.50 mm or larger.

Sullins Electronics Corp.    San Marcos, CA 92079-0189
May 18, 2009 Comprised of 0.100, 0.125, and 0.156 in. contact centerline parts, RDPS Series is engineered to accept 0.062 in. thick daughtercards. Double-contact-point pin design coupled with material rating of -65 to +150°C helps extend life in mission-critical electronic systems and end products. Double-row parts feature current rating of 3 A per contact, and are provided in 6-70 contact positions. Units offer choice of dip solder, wire wrap, right angle bend, and card extender terminations.

Belden    Richmond, IN 47375
May 18, 2009 Designed for assembly on DIN rails, MICE Switches support Fast Ethernet and Gigabit Ethernet, as well as routing, redundancy, and security features. PTP v2 media module, with synchronization accuracies in nanosecond range, includes boundary clock and ordinary clock, plus transparency clock, which minimizes synchronization deviations. Operating from 0-60°C, plug-and-play PTP module supports hot swap function and includes LED to indicate current status of network connections.

Quality Bearings & Components    New Hyde Park, NY 11042
May 18, 2009 Offered in many sizes to fit shafts ranging from ½-4 in. diameter, BBXINS Series includes set screw type models with 2 screws. Tightening set screws contacts shaft, which effectively locks shaft to bearing so both will turn as one. Available for .5512-1.5748 in. wide bearings, inserts are suitable for textile machinery, conveyor systems, and ventilators, as well as machines for food processing and packing.

Surface Guard, Inc.    Aurora, IL 60504
May 18, 2009 Offered in 50-sheet case quantities for small runs or niche types of projects, Wave Flute has profile that creates eye-catching effect to draw attention to packaged products. Each sheet in case measures 40 x 29.5 in., and all sheets may be supplied in one of 6 standard colors: red, white, blue, black, green, and earth. Wave Flute can also be manufactured in custom colors, sheet sizes, and quantities as well.

Hamilton Storage Technologies    Hopkinton, MA 01748
May 18, 2009 Suited for high-throughput screening labs in drug discovery research, asmServerST active sample management system integrates SealTite(TM) technology for automatic microplate lidding and unlidding. SealTite features stainless steel lids that form liquid-tight seal, eliminating risk of contamination. System delivers secure, high-capacity storage and tracking of compounds in microplate format and maintains sample integrity at temperatures from ambient to -20°C.

Techno, Inc. - CNC Router Systems    New Hyde Park, NY 11040
May 18, 2009 Constructed from one rigid aluminum extrusion profile, Heavy-Duty Slide 2 features 225 mm wide, modular design available in travels from 122-2,722 mm with wraparound motor mounting kit that allows for longer travel with shorter overall lengths. Teflon® lip seals ensure full length of travel is utilized and interior components are guarded against contaminants. All models are fit with 4 precision rails, 4 bearing blocks, home reference, and end limit switches.

DecTron by Special-T Shop Mfg., Inc.    Newberg, OR 97132
May 18, 2009 Able to handle up to 45 lb of load, 70-Series Flex Arm offers unlimited uses and abilities when used with other 70-Series Flex Arm System products. Single counterbalanced arm section can be used alone or added to rigid section when vertical motion of up to 28 in. is needed. Unit's solid steel shafts are finished with block oxide/oiled finish. It is available in 13½, 18, and 24 in. lengths and features polyurethane enamel that is resistant to chemicals, stains, and abrasions.

Ormec Systems Corp.    Rochester, NY 14625
May 18, 2009 ServoWire Motion and Logic Controllers are available in 3-, 8-, 16-, and 24-axis models. Offering motion control and PLC functions in single package, units are powered by Intel® 32-bit processors and can interface with high-speed drive-based I/O for microsecond position capture. They also offer less than 1 ms programmable limit switch outputs, tightly coupled to motion control. Devices are suited for packaging, material handling, medical, and general assembly applications.

C&K Components    Newton, MA 02458
May 18, 2009 PBA Series miniature pushbutton switches include gold plated contacts, IP64 sealing, and extended life cycles to 1,000,000 rotations. They feature actuation force of 5.5 ± 0.5 N, with maximum force of 80 N, travel to contact distance of 1.2 ± 0.1 mm, with overtravel of greater than 0.3 mm and total travel of 1.5 ± 0.1 mm. Gold contact material offers maximum switching power of 1 W, contact resistance of less than or equal to 50W and dielectric strength of 500 Vrms.

Detector Electronics Corp.    Minneapolis, MN 55438
May 18, 2009 With Class I, Div. 1 and NEMA 4X approvals from FM, CSA, CE, and ATEX, xWatch® camera and surveillance system automatically detects and records safety incidents for remote or local viewing. System enables immediate viewing of industrial hazards remotely via configurable IP address, and record and review incidents for event analysis. Flame detector with camera views same expanse, and continuous, real-time video captured provides operator with surveillance capabilities during normal operation.

ITT Interconnect Solutions    Santa Ana, CA 92705
May 18, 2009 Fully compatible with IEC 61076-4-104 backplane connectors, Tempus CBC 20 connectors are suited for use in telecommunication, industrial, medical, and instrumentation applications. Cable receptacles are available in 4 row versions with 4 x 6 and 4 x 12 contacts and 5 row versions with 5 x 6 and 5 x 12 contacts. Offering quick termination without need for wire stripping, receptacles accommodate AWG 24-30 wire sizes with insulation displacement contact (IDC).

Jamison Door Company    Hagerstown, MD 21740
May 18, 2009 Accommodating most major brands of RFID equipment, Gnome(TM) series RFID stand can be used in pairs or as free-standing single unit to read GEN2 RFID tags. It measures 22 x 5 x 51 in. and uses textured ABS covers, available in black or white. Plug-and-play units are available that include readers and antennas. Offered with either solid oak side trim in 4 finishes or matte aluminum finish, unit can be bolted to floor or wall-mounted using special bracket.

Control Co.    Houston, TX 77258 8307
May 18, 2009 Suited for monitoring solutions, refrigerators, and room temperature, Traceable® Thermometer captures and shows exact time and date when minimum and maximum temperature occurred. It has range of -40.0 to 176.0°F and -40.0 to 80.0°C with resolution of 0.5° and accuracy of ±1.5°C. Unit includes 3/16 in. dia, 1½ in. long sensor and 6 ft cable, both performing accurately even under water. Features include high-impact ABS plastic case, flip-open stand for bench, and slot for wall mounting.

Amphenol Industrial Operations    Sidney, NY 13838
May 18, 2009 Flameproof compliant to EN 60079-0 and EN 60079-1, Amphe-EX compact explosionproof threaded connectors are designed to allow signal to pass through Zone 1 rated areas using coax and fiber optic cables as well as standard copper. Available in 5 shell sizes and 50 insert patterns, connectors are suited for use with 12-28 AWG gauge wires and ATEX and IEC approved. Scratch-resistant, anodic hardcoat plated hardware provides heat resistance and dielectric strength.

Transducers USA    Elk Grove Village, IL 60007
May 18, 2009 Operating at 12 Vdc, TRIP-1500N is suited for any mobile unit or portable device needing alarm protection or warning alert. With sound output of 115 dBA at 30 CM generated from 2.1 x 2.2 in. tubular package, unit's tones begin with siren, changing to Hi-Lo wail, then to Euro alarm, to rising wave Hi-Lo, and then to its final dive alarm, automatically recycling through 6 tone alerts. RoHS complaint unit has operating temperature ranging from -40 to +60ºC.

Honeywell Sensing and Control    Golden Valley, MN 55422
May 18, 2009 HIH-5030 is covered IC humidity sensor, while HIH-5031 is covered, condensation-resistant, IC humidity sensor factory-fitted with hydrophobic filter for use in condensing environments. Reporting over humidity range of 0-100% RH, CMOS-based devices use capacitive technology to provide analog voltage output in solderable SMD package. Sensing element's multi-layer construction provides resistance to condensation, dust, dirt, oils, and common environmental chemicals.

IntelLiDrives Inc.    Philadelphia, PA 19152
May 18, 2009 Providing reliable motorized motion in a small form factor and lightweight package, MLA-006 series of micro-linear motorized actuators come with stepper and closed-loop DC servo motor versions and include integrated limit switches for repeatable referencing and homing. They weigh 120 g, and feature resolution of 0.1 micron, 30 N force, accuracy of 3 microns, repeatability of 1 micron, and backlash of 0 microns.

Quality Bearings & Components    New Hyde Park, NY 11042
May 18, 2009 Set screw type and locking collar type, BBXINS series are available in various sizes to fit shafts ranging from ½ to 4 in. in dia. Set screw type bearing inserts have 2 set screws which contacts/locks shaft to bearing so that the two will turn as one. With widths ranging from 0.5512-1.5748 in., bearing inserts suit applications in textile machinery, conveyor systems, ventilators, as well as machines for food processing and packing.

ID Technology Corp.    Fort Worth, TX 76106
May 18, 2009 Model 250 Label Printer Applicator is offered with service position tamp assembly that allows for access to print engine. Built and mounted to swing out and away from print engine, assembly allows more room for operators and maintenance personnel to perform service routines on print engine. Assembly is available as 2, 4, 6, or 8 in. straight tamp module and can be ordered for existing machine or as part of new Model 250.