Dynabrade, Inc.    Clarence, NY 14031
May 28, 2009 Offered in 4 models, Dynascaler surface preparation tools power Roto Peen Bonded Flap Assemblies for removing rust, oxide, scale, old paint, and coatings. Straight Line and Right Angle models let operators work close to work surface and have 4-position top handle, while Floor model features 20-slot hub for Roto Peen Bonded Flaps and suits scaling operations along extended areas. Over-Under model mechanically fractures scale and coatings with negligible removal of base metal.

Raveon Technologies Corp.    Vista, CA 92081
May 28, 2009 Sending location and status information to Google Earth using KML file format, RavTrack PC v2.6 enables users to visualize real-time asset locations in 3-D, and deliver optimized routing and driving directions. Because RavTrack PC has its own local map imagery, RavTrack vehicle tracking system will work even if network connection to Google is lost. System is suited for public safety, search and rescue, and real-time tracking applications.

Acromag, Inc.    Wixom, MI 48393 7037
May 27, 2009 Designed for Johnson Controls N2 or BACnet MS/TP bus control systems, Model 4683-TTM-3F drives up to 32 RS-485 devices while isolating and boosting signals up to 4,000 ft. Operation is transparent to all devices and no handshaking or extra control lines are required. Offering electrical surge protection with 1,500 Vac isolation, unit shields host computer from noise spikes and other transient signals. Baud rates of 600, 1,200, 2,400, 4,800, 9,600, 19.2K, 38.4K, and 76.8K are switch-selectable.

Rudolph Technologies, Inc.    Flanders, NJ 07836
May 27, 2009 Measuring 60-80 product wafers/hr, MetaPULSE®-G thin film measurement tool is optimized specifically for copper damascene processes at 45 through 22 nm technology nodes and copper via fill in 3D IC applications. Tool uses green wavelength laser for measurement repeatability better than 0.3%. System's 10 x 10 µm spot size is small enough to measure wafers in 30 x 30 µm or smaller test sites.

STMicroelectronics    Lexington, MA 02421
May 27, 2009 Suited for use in high-efficiency power supplies for LCD monitors, TVs, and energy-saving lamp ballasts, STx7N95K3 series includes 950 V breakdown-voltage class that benefits systems that minimize energy losses by operating at 400 V or more. Avalanche current rating of 9 A ensures resilience to surges above breakdown voltage, and conduction losses are minimized by achieving RDS(ON) of less than 1.35 Ohm. Gate charge and intrinsic capacitance values lend to switching performance.

NEXCOM Inc.    Fremont, CA 94538
May 27, 2009 Powered by Intel® Xeon 5500 series processors, 2U 19 in. rack-mount NSA 7110 supports Tylersburg memory control Hub and Intel ICH10R I/O controller. Inherent performance and flexibility to support various IP network applications are supplemented with network connectivity and expansion capabilities. Along with built-in RAID, system supports up to 24 GB DDRIII system memory with 6 memory sockets, 4 hot-swappable 3.5 in. SATA HDD trays, and 3 independent LAN module bays.

SICK, Inc.    Minneapolis, MN 55438
May 27, 2009 Non-contact LMS111 series, designed for outdoor anti-collision environments, and LMS100 series, designed for indoor profiling applications, are non-safety rated sensors with filtering technology that eliminates false trips in measurement applications. By using SICK SOPAS tool, sensors may be configured with up to 10 detected fields, multiple I/O, and Boolean logic. Both sensor series offer adjustable mounting configurations and are rated to IP67.

Axiohm    Cincinnati, OH 45140
May 27, 2009 Offering adjustable print width, KMGA Series accommodates 58, 60, 66, 80, and 82.5 mm paper, making it suited for self service, informational, and transaction kiosk applications. Unit features jam-free guillotine auto cutter, RS232 and USB interface, and telescopic paper holder offering up to 4 configurations and 6 angular positions. With ability to handle paper rolls up to 250 mm dia and thicknesses up to 120 µm, KMGA Series can operate as ticket or receipt printer.

CS Unitec, Inc.    Norwalk, CT 06850
May 27, 2009 Model CS 536163-2 pneumatic concrete chain saw features AirFORCE F4(TM) Diamond Chain that cuts up to 15 in. deep in concrete and includes chain-based water distribution system for lubrication between bar and chain. Air saw plunge cuts mechanical openings, irregular shapes, and square corners up to 14" in. with no overcuts. Featuring 6.5 hp motor with no load speed of 5,700 rpm, unit operates at 124 cfm air volume at 90 psi, with noise level of 88 dB at 3 ft.

Schaeffler Group USA, Inc.    Fort Mill, SC 29715
May 27, 2009 Generation C deep groove ball bearings have optimized raceway curvature between balls and rings, minimizing chance of misalignment between inner/outer ring. Operating in temperatures from -30 to +120°C, units offer minimal heat generation at high speeds as well as minimized noise and shock sensitivity. Bearings feature HRS seal with double lip geometry as well as axial contact between inner ring/seal, protecting them against contamination. They are available with 26-90 mm ODs.

Toshiba America Information Systems, Inc    Irvine, CA 92618-1697
May 27, 2009 IPS Series features 5.8 x 17.25 x 19.5 in., 3U chassis that mounts into any standard rack. Supporting up to 32 IP cameras, NVRs record cameras at encoded resolution and feature software that provides simultaneous recording, playback, and remote streaming of live video images. Various settings can be defined on per camera basis, including resolution, motion detection, and speeds up to 30 fps. Video is stored using MJPEG compression to optimize storage space.

Greyline Instruments, Inc.    Massena, NY 13662
May 27, 2009 Controlling flow with non-contacting ultrasonic sensor mounted on outside of pipes ½ in. diameter or larger, Model DFS-II is suited for pump protection, valve control, and flow/no-flow alarms. Water-tight NEMA 4X switch enclosure includes 5 A DPDT control relay, with adjustable ON and OFF set point controls, adjustable time delay, selectable fail-safe operating mode, signal strength and relay status LEDs, and sensitivity adjustment. Sensor mounting kit is included.

Steinmeyer Inc.    Bedford, MA 01730
May 27, 2009 Providing repeatability of ±1 micron, model PMT320 features load capacity of 500 kg. Flatness and straightness run-out is ±2 microns over any 100 mm travel. Unit features 320 mm wide die-cast base profile, 1,000 mm stroke stage weighing 70 kg, size 25 precision linear profile rails for linear guidance, and linear encoder. It is available with 2 drive options, with maximum acceleration up to 5 m/sec² and speed up to 500 mm/sec², depending on drive chosen.

Techno, Inc. - CNC Router Systems    New Hyde Park, NY 11040
May 27, 2009 Economy Tooling Line is designed to reduce replacement tool costs while novice CNC router users are gaining knowledge on how to cut properly. Made of solid carbide, hand-picked tools include various Flat and Ball End Mills that are available in both standard and long lengths. Heat-resistant products, offered with 9 cutting edge length options from 3/32-3 in., maintain sharp cutting edge and can be used on plastic, wood, solid surfaces, foam, and acrylic.

Rosco, Inc.    Jamaica, NY 11435
May 27, 2009 Designed for school and transit industries, EuroStyle mirror is used on all full-size and cut-away platforms. Classic 8 x 15 in. dual mirror style is available in upright or overhang formation. Features include 7 x 9.5 in. flat mirror surface and 7 x 4 in. convex mirror surface. Product is also available with single 7 x 14 in. flat mirror and in 12/24 V, heated or unheated versions. Access panel facilitates electronic connection, and internal wire harness serves 4-way adjustable motors.

Tape-Rite Co., Inc.    New Hyde Park, NY 11040
May 27, 2009 Industrial Gasketing foam tape, available in urethane, neoprene, felt, cork, Gore-tex, self-adhesive, and non-adhesive materials, are used to create seal between 2 surfaces. Product has adhesive on one side and is soft enough to conform to other surface when pressed down. Some products may also be used as anti-skid and anti-scratch pads, and all versions can be cut to shape. Printing and tape splitting capabilities to widths from 1/64-6 in. are available.

Fluid Metering, Inc. (FMI)    Syosset, NY 11791
May 27, 2009 Offering flow rates to 2,300 mL/min ±1%, Industrial Variable Speed Metering Pump features ¼ hp, 3-phase variable speed drive that handles broad range of fluid viscosities, and CeramPump® Valveless piston design with 1 moving part in fluid path. DIN mount controller with local keypad controls acceleration time, deceleration time, direction start/stop, and stop method.

Belden    Richmond, IN 47375
May 27, 2009 Designed to support Category 6 IBDN System 3600, DataTwist® 3600 Cables provide stable transmission characteristics and offer SNR that ensures error-free performance in LANs where noise and interference are high. These UTP copper cables, which meet and exceed TIA/EIA requirements, consist of 4 pairs of 23 AWG insulated copper conductors with round flexible core construction. Diameter and bandwidth properties enable high-density installations.

AVX Corp.    Myrtle Beach, SC 29578
May 27, 2009 Suited for oil and gas, aerospace, and automotive applications, THJ 200C SMD Series delivers 1,000 hours of continuous operation at 200°C with derating. Solid tantalum capacitors come in 2 E-case sizes, E 220 µF rated at 10 V for 3 V rail application at 200°C and E 100 µF rated at 16 V for 5 V rail application at 200°C. Units feature leakage current of less than 1 mA after 1,000 hr of operation at 200°C. All withstand 3x reflow soldering process at 260°C and are RoHS-compatible.

GE Intelligent Platforms    Charlottesville, VA 22911
May 27, 2009 Suited for error proofing, line balancing, material call, and other production support tasks, StationPortal(TM) provides common Ethernet interface for typically disparate I/O such as pushbuttons, barcode scanners, and LEDs. These inputs tie directly into Proficy® HMI/SCADA -CIMPLICITY 8.0 software for discrete manufacturing, which comes with 100-tag data historian. Each StationPortal has 3 discrete inputs, 3 discrete outputs, 3 colored lamps, 1 pushbutton, 1 horn, and 1 serial port.