Electronic Development Laboratories, Inc.    Danville, VA 24540
Jun 08, 2009 With fluid immersion depth of over 9 in., MSB-500 is suited for benchtop comparison calibrations of SPRTs and thermocouples from 180-500°C. It achieves 10 mK stabilities and uniformity using less than 14 lb of salt, and features built in RS-232 communication, and touch screen interface pre-programmed with standard calibration points for simple one-touch settings. Safety features include independent low and high cutout and stainless steel grating to protect dual stirring blades.

Emerson Process Management    Pleasanton, CA 94566
Jun 08, 2009 Offering nested spring design, Fisher® 2052 can be installed on rotary-shaft valve bodies for throttling or on-off applications. Actuator linkage features clamped shaft lever and single pivot point to reduce lost motion between actuator and valve. Available in 3 sizes accommodating shaft sizes from 12.7-38.1 mm, actuator features powder paint coating that offers corrosion-resistant finish on all external steel and cast iron parts.

IBASE Technology Inc.    Taipei   Taiwan
Jun 08, 2009 Powered by 1.6 GHz N270 Intel® Atom(TM) processor, fanless system CSB200-883 comes with one 2.5 in. HDD and supports up to 1 G of DDR2 533 SO-DIMM memory. It features 60 W power adaptor and real panel I/O for USB, DVI, KB/MS, LAN, and DC-in jack. Measuring 172 x 113.6 x 52 mm, slim and black aluminum and steel chassis is provided with 60 W power adaptor and can be desktop or wall mounted. Barebone version CSB200-883M consists of chassis, SBC, power adaptor, and mounting brackets.

Parker TexMed    Fort Worth, TX 76106
Jun 08, 2009 Acting like fabric, pores in TexPore(TM) expanded PTFE tubing permit cells to attach to tube as well as escape from tube, depending on application. Permeable tube can be used in dispensing of special drugs or dyes that need to be released into body quickly or in applications where gasses and liquids must be separated. Capable of operating at temperatures up to 500ºF, biocompatible, non-aging, non-toxic and autoclavable tubing is available in sizes ranging from 0.62-400 in. ID.

Parker Hannifin Corp    Greenfield, TN 38230
Jun 08, 2009 Using precision taper roller bearings, PV115 gearhead's design achieves high radial loads. Gearhead supports larger belt actuators, including HPLA120 and HLE150 and offers efficiency up to 97%. Applications include belt and pulley, conveyor and production machinery, automotive production and inspection equipment, as well as medical and life sciences.

GE Sensing    Billerica, MA 01821
Jun 08, 2009 Featuring 1 Gb of internal flash memory and single USB® 2.0 port, XL Vu is designed for basic inspection where operators need a quick view of hard to access areas. Featuring servo motor All-Way® Probe articulation, ac corded or upgraded battery powered options, and full tip optic interchangeability with secure double threads, unit suits applications in oil and gas, power, automotive, security, and aerospace industry.

Greenlee Textron, Inc.    Rockford, IL 61109
Jun 08, 2009 Designed for drilling holes in salt treated utility poles or wood structures, hardened alloy steel auger bits features self-feeding threaded screw point to draw bit completely through wood, and over center flute design allows for evacuating of chips. Self feed cutting edge can be re-sharpened multiple times, and 7/16 in. hex shank comes with quick change groove for use with impact drivers. Units are suited for use by utility workers and electrical contactors.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Jun 08, 2009 DIGI-BRITE(TM) gas price controller has 4-line LCD readout, price update confirmations, and enables user to change prices without going outside. Ten days of price history records can be retrieved, and users have 1 million pass code and manager/user security level. Up to 12 panels and 6 different fuels can be programmed, and it features battery/AC operation and 16 brightness levels, including city approved brightness setting. Viewing angle is 40° vertical and 140° horizontal.

Binder-USA, LP    Camarillo, CA 93012
Jun 08, 2009 RD24 Series 692 7-pin overmolded connectors are commonly used for power supplies in oil and gas industry and various commercial applications. Cordsets offer male or female, straight or right angle connectors. Rated current up to 10 A per contact is possible, and when properly mated they are IP67 rated to protect connection from ingress of liquids and debris. Each connector is constructed with plastic shell molded onto 2 m PVC UL approved cable; custom cable lengths are available.

Henkel Corporation    Rocky Hill, CT 06067
Jun 08, 2009 Offering solderability over wide range of reflow profiles in both air and nitrogen, Multicore® LF700 works on Ni/Au, immersion Sn, immersion Ag, and OSP copper surface finishes. Capable of reducing voiding in BGA solder joints, it delivers high tack force to provide stability during high-speed component placement and offers long printer abandon times of up to 4 hr even when printed onto extremely fine-pitch 0.4 mm CSP apertures.

B & K Precision Corp.    Yorba Linda, CA 92887
Jun 08, 2009 Offering 2 variable voltage outputs of 0-60 V/0-2 A and one variable 4-6.5 V/ 4 A output, 21 lb model 1762 features 4 digit display offering 10 mV and 1 mA resolution and capability to set voltage and current values accurately and precisely. Resolution of voltage meter is between 0-99.99, while amperage meter has resolution between 0-9.999. Each output of unit is fully floating and can be adjusted independently or connected in series or parallel to produce higher voltages or currents.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jun 08, 2009 Giga-snaP(TM) BGA SMT adapter pair consists of SF-BGA316C-B-62F female sockets with machined pins epoxy over-molded into assembly that matches male pin LS-BGA316C-61. Soldered to PCB using standard soldering methods without warping, SF-BGA316C-B-62F allows 0.8 mm pitch, 17 x 17 mm body, 20 x 20 array Analog Device ADSP-BF539/ADSP-BF539F ICs to be socketed and operate in demanding automotive applications. Both adapters are constructed with high temperature FR-4 bodies.

WLD-TEC Gmbh    Arenshausen   Germany
Jun 08, 2009 With stable housing and removal positions on both sides suited for right and left handers, Autoloop^PRO accommodates up to 4 inoculation loops and rotates/controls flaming automatically. Flaming and cooling time can be adjusted to the second, while intelligent sensor monitors safe sterilization. When flaming is completed, fully graphic display shows remaining cooling time and removal positions of cool inoculation loops, preventing unintentional use of hot inoculation loops.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Jun 08, 2009 Measuring 4.5 in. wide and 4 in. deep, Aurora is available for recessed installation in either T bar ceiling or flanged for sheet rock or concealed spline ceilings. One lamp, T5 or T5HO, is supplied with frosted micro-prism acrylic diffuser in regressed trim. Offered in lengths of 2, 3, 4, and 5 ft, units are available with optional MR16 modules that are gimbaled to allow for aiming lamps. Applications include offices, conference rooms, waiting rooms, retail, and lobbies.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 08, 2009 Available in gage and absolute and differential pressure models with ranges as low as 28 InH₂O, HHP241 features 8 user selectable engineering units, min/max, hold, and display average modes with user activated back light. CE compliant device shuts off automatically after 20 min of keypad inactivity.

Vision Engraving Systems    Phoenix, AZ 85023
Jun 08, 2009 With 25 x 25 and 25 x 50 in. work areas, models 2525 and 2550 allow users to cut out sheets of acrylic, particle board, aluminum, and plastics in sizes up to 2 x 4 ft. They include automatic surface-setting block, aluminum t-slot table, Vision Series 3 Controller, Vision Pro 8 software, and offer 7 in. of clearance with high gantry. Machines are suited for creating cutout letters and shapes, 2.5- and 3D-designs, ADA compliant signs with Braille, inlays, and control panels.

Vision Engraving Systems    Phoenix, AZ 85023
Jun 08, 2009 Handling wide variety of milling, drilling, contouring, routing, and engraving projects, large-format CNC routers feature aluminum t-slot table, Vision Series 3 Controller, and Vision PRO 8 graphical software with Ethernet interface. They suited for cut out letters, inlays, and ADA and 2.5-D and 3D signs; cabinets, furniture, and other woodworking projects. Options include vacuum table, automatic tool changer, engraving head, and automatic Raster(TM) Braille inserter.

MIE Solutions    Garden Grove, CA 92845
Jun 08, 2009 Supporting hundreds of users, MIE Docs v1.53 manages documents by creating virtual drive on network where everyone can share files from repository using Windows Explorer. Right clicking on folders/files brings up context menu system, which allows adding, deleting, checking in/out, and attribute management. In addition to context-sensitive menu, features include automatic local virtual drive/repository synchronization and disconnected mode for editing/viewing documents from main repository.

Seanodes Inc.    Cambridge, MA 02138
Jun 08, 2009 Scalable and fault-tolerant, Exanodes(TM) VM Edition Storage Virtual Appliance is used for designing clustered virtual iSCSI SANs that leverage VMware ESX server storage resources and turn them into virtual SAN within minutes. Symmetric design, where each ESX server participates in storage tasks, gives VMs range of access points to storage, I/O controllers, and disks to ensure each VM gets necessary performance. Solution is also resistant to bandwidth restrictions and I/O bottlenecks.

Analytical Graphics Inc.    Malvern, PA 19355
Jun 08, 2009 STK performs complex analysis of land, sea, air, and space assets, and shares results in one integrated solution. Offering streaming access to Microsoft Virtual Earth(TM) imagery, STK v9 provides high-resolution global terrain data down to 90 m resolution. Program features access to STK Engine development kit, graphical user interfaces to common functions such as inserting and defining objects and reporting, and plugins for creating customized workflows.