Jones & Shipman Precision Limited    Farmington, CT 06032
Jun 08, 2009 Holroyd Gear and Thread Grinder, model GTG2, offers precision grinding of helical/spur gears in diameters up to 350 mm. System enables users to grind small batches of gears to DIN and AGMA quality standards. On-board intelligence includes 3D scanning as well as stress prediction software which allows machine to optimize gear design. Machine can also produce master gears, precision prototyping, and timing gears for use in aerospace applications.

Gresham Power    Salisbury   United Kingdom
Jun 08, 2009 Offering 365 W in 3 x 5 in. footprint, HD365 Series provides 18 W/in.³ power density. Open frame switch mode power supplies feature universal AC input with active PFC, convection cooled operation up to 220 W, and standard output voltages of 12, 24, and 48 Vdc. Delivering up to 500 W of continuous power, cPCI AC/DC Power Supplies are compliant with PICMG® 2.11 specification. Units feature 85-264 Vac universal or 18-72 Vdc input, 4 outputs, and hot-swap and N+1 redundant operation.

QNAP Systems, Inc.    Taiwan   China
Jun 08, 2009 Compatible with IP-based cameras and network video servers of various brands, 12-channel VioStor-2012 and 8-channel VioStor-2008 support megapixel recording, 4 TB storage capacity, and high quality A/V monitoring in small business/SOHO environments. Each 2-bay, 1.6 GHz Intel® Atom(TM)-based network surveillance system features 1GB DDRII memory, DOM architecture, and 3.0 firmware. Linux-based solutions support M-JPEG, MPEG-4, and H.264 video compression as well as intelligent data search.

Cissoid    Mont Saint Guibert 1435  Belgium
Jun 08, 2009 Designed to drive high-voltage, high-power devices, such as Silicon Carbide (SiC) power transistors, PROMETHEUS operates from -55 to +225°C and implements 2 A power driver on basis of high-temperature active components. It can be supplied from 11-30 V and will switch up to 500 KHz on 30 nF load. Non-overlap circuitry avoids short-circuit currents through push-pull power output stage, and driver can be adapted to other devices: MOSFET, IGBT, JFET, BJT, and GaN.

QNAP Systems, Inc.    Taiwan   China
Jun 08, 2009 Powered by 1.2 GHz Marvell processor, TS-219P supports 2 hot-swappable 2.5 or 3.5 in. SATA HDDs with 4 TB max capacity. It comes with 512 MB DDRII memory, 3 USB ports, and 2 eSATA ports and can be accessed across Windows, Mac, Linux, and UNIX. Unit also comes with built-in iSCSI target service (max 8 iSCSI devices) with Thin Provisioning, Online RAID Capacity Expansion and Level Migration, and automatic policy-based IP blocking. Giga LAN port and 2 IP cameras are also included.

Sunrise Telecom Inc.    San Jose, CA 95119
Jun 08, 2009 When combined with MTT Advanced Cable Maintenance chassis, UDSL-3Play Module enables telecom service providers to verify copper infrastructure and triple play IP services delivered over Universal DSL access network. Module provides both customer premises and central office DSL modem emulation, as well as IP data connectivity and throughput test to determine Internet access and overall QoE. Single button DSL test automatically presents summary screen of key metrics.

Tripp Lite    Chicago, IL 60609
Jun 08, 2009 Able to directly support up to 4 remote monitors, Model B132-004 extends VGA video signal up to 500 ft from source, while Model B132-004A extends both video and audio. Range is extendible up to 1,000 ft using low-skew Cat5 patch cable. Supporting video resolution up to 1,920 x 1,440 at 500 ft, rackmount extenders/splitters are compatible with VGA, SVGA, UXGA, and WUXGA displays. Equalization and Gain adjustment screws assure clear picture.

Saelig Co., Inc.    Pittsford, NY 14534
Jun 08, 2009 Appearing as Human Interface Device, Warrior ICs require no Windows software drivers. IO-Warrior56 features 50 pins that can be used as direct I/O lines, or more complex functions, such as I2C, SPI, controlling display modules, 8x8 switch matrices, and IR remote control decoding. IOW56 can run I2C master interface at 100 Kbps, with clock stretching for handshaking with slaves supported. SPI master function allows max bit rates of 12 MHz and peak data throughput of 62 KBps.

ON Semiconductor, LLC    Phoenix, AZ 85008
Jun 08, 2009 Suited for driving current in automotive, industrial signage, and architectural LED lighting, NSI45 series 2-terminal linear constant current regulators come in 20, 25 and 30 mA versions in SOD-123 and SOT-223 packages. Available with ±10% and ±15% steady state regulated current tolerance, series has is rated 45 V, has -40° to +85° operating temperature range and max junction temperature of 150°C. RoHS compliant units are compliant with AEC101 automotive standard.

AAEON Technology Inc    Taipei   Taiwan
Jun 08, 2009 Offering DDRII SDRAM SODIMM system memory up to 2 GB, AEC-6911 features 2 PCI and 2 PCMCIA slots for expansion, 4 COM ports, 2 RJ-45 Gigabit Ethernet, and 4 USB 2.0 ports, which allow for communication with diverse devices with high transfer rate. It is equipped with VGA, audio, and S-video port as well, for enabling multimedia applications. Suited for rugged applications in machine automation, unit also offers CompactFlash(TM), and one SATA/IDE hard disk drive for storage expansion.

Electronic Development Laboratories, Inc.    Danville, VA 24540
Jun 08, 2009 With fluid immersion depth of over 9 in., MSB-500 is suited for benchtop comparison calibrations of SPRTs and thermocouples from 180-500°C. It achieves 10 mK stabilities and uniformity using less than 14 lb of salt, and features built in RS-232 communication, and touch screen interface pre-programmed with standard calibration points for simple one-touch settings. Safety features include independent low and high cutout and stainless steel grating to protect dual stirring blades.

Emerson Process Management    Pleasanton, CA 94566
Jun 08, 2009 Offering nested spring design, Fisher® 2052 can be installed on rotary-shaft valve bodies for throttling or on-off applications. Actuator linkage features clamped shaft lever and single pivot point to reduce lost motion between actuator and valve. Available in 3 sizes accommodating shaft sizes from 12.7-38.1 mm, actuator features powder paint coating that offers corrosion-resistant finish on all external steel and cast iron parts.

IBASE Technology Inc.    Taipei   Taiwan
Jun 08, 2009 Powered by 1.6 GHz N270 Intel® Atom(TM) processor, fanless system CSB200-883 comes with one 2.5 in. HDD and supports up to 1 G of DDR2 533 SO-DIMM memory. It features 60 W power adaptor and real panel I/O for USB, DVI, KB/MS, LAN, and DC-in jack. Measuring 172 x 113.6 x 52 mm, slim and black aluminum and steel chassis is provided with 60 W power adaptor and can be desktop or wall mounted. Barebone version CSB200-883M consists of chassis, SBC, power adaptor, and mounting brackets.

Parker TexMed    Fort Worth, TX 76106
Jun 08, 2009 Acting like fabric, pores in TexPore(TM) expanded PTFE tubing permit cells to attach to tube as well as escape from tube, depending on application. Permeable tube can be used in dispensing of special drugs or dyes that need to be released into body quickly or in applications where gasses and liquids must be separated. Capable of operating at temperatures up to 500ºF, biocompatible, non-aging, non-toxic and autoclavable tubing is available in sizes ranging from 0.62-400 in. ID.

Parker Hannifin Corp    Greenfield, TN 38230
Jun 08, 2009 Using precision taper roller bearings, PV115 gearhead's design achieves high radial loads. Gearhead supports larger belt actuators, including HPLA120 and HLE150 and offers efficiency up to 97%. Applications include belt and pulley, conveyor and production machinery, automotive production and inspection equipment, as well as medical and life sciences.

GE Sensing    Billerica, MA 01821
Jun 08, 2009 Featuring 1 Gb of internal flash memory and single USB® 2.0 port, XL Vu is designed for basic inspection where operators need a quick view of hard to access areas. Featuring servo motor All-Way® Probe articulation, ac corded or upgraded battery powered options, and full tip optic interchangeability with secure double threads, unit suits applications in oil and gas, power, automotive, security, and aerospace industry.

Greenlee Textron, Inc.    Rockford, IL 61109
Jun 08, 2009 Designed for drilling holes in salt treated utility poles or wood structures, hardened alloy steel auger bits features self-feeding threaded screw point to draw bit completely through wood, and over center flute design allows for evacuating of chips. Self feed cutting edge can be re-sharpened multiple times, and 7/16 in. hex shank comes with quick change groove for use with impact drivers. Units are suited for use by utility workers and electrical contactors.

Pro-Lite, Inc.    Costa Mesa, CA 92626
Jun 08, 2009 DIGI-BRITE(TM) gas price controller has 4-line LCD readout, price update confirmations, and enables user to change prices without going outside. Ten days of price history records can be retrieved, and users have 1 million pass code and manager/user security level. Up to 12 panels and 6 different fuels can be programmed, and it features battery/AC operation and 16 brightness levels, including city approved brightness setting. Viewing angle is 40° vertical and 140° horizontal.

Binder-USA, LP    Camarillo, CA 93012
Jun 08, 2009 RD24 Series 692 7-pin overmolded connectors are commonly used for power supplies in oil and gas industry and various commercial applications. Cordsets offer male or female, straight or right angle connectors. Rated current up to 10 A per contact is possible, and when properly mated they are IP67 rated to protect connection from ingress of liquids and debris. Each connector is constructed with plastic shell molded onto 2 m PVC UL approved cable; custom cable lengths are available.

Henkel Corporation    Rocky Hill, CT 06067
Jun 08, 2009 Offering solderability over wide range of reflow profiles in both air and nitrogen, Multicore® LF700 works on Ni/Au, immersion Sn, immersion Ag, and OSP copper surface finishes. Capable of reducing voiding in BGA solder joints, it delivers high tack force to provide stability during high-speed component placement and offers long printer abandon times of up to 4 hr even when printed onto extremely fine-pitch 0.4 mm CSP apertures.