Y-Connect, Inc.    Middletown, PA 17057
Jun 17, 2009 Duplex and Quad LC Adapters include modularized multiport dust shutter providing dust as well as eye protection for Class III A and lower lasers. Units offer secure panel mount latching and are compatible with T.I.A. FOCIS 10B duplex and quad panel cutouts, allowing users to double connection densities using existing simplex or duplex SC adapter panel cutouts, respectively. Available in MM, SM, and APC, products meet UL 94 V-0 flammability requirements and are RoHS compliant.

Y-Connect, Inc.    Middletown, PA 17057
Jun 17, 2009 Suitable for singlemode (SM) and multimode (MM) applications, SC and LC adapters are available with phosphorous bronze sleeve and provide reliable connections between SC and LC connectors. Simplex LC-SC Hybrid adapter is designed with secure panel mount latching and compatible with TIA FOCIS 10B. LC-SC Hybrid adapter, available in MM and SM is offered in blue, beige, green, and black; meets UL 94 V-0 flammability requirements; and is RoHS-compliant.

Turck USA    Minneapolis, MN 55441
Jun 17, 2009 Designed to detect piston position on pneumatic cylinders, Q25L magnetically actuated linear displacement sensor features blind zone of 20.5 mm on each end and is available with measuring ranges of 100, 125, 160, and 200 mm. It detects position of piston on standard pneumatic cylinders by utilizing series of Hall elements that sense piston magnet and send signal back to processor. Repeat accuracy is less than 0.1% of measuring range, and linear deviation is less than 1% of FS.

Rockwell Automation    Milwaukee, WI 53204
Jun 17, 2009 Equipped with integrated laser alignment system, GuardShield Safe 4 transmitter and receiver pair is available in 14 and 30 mm resolutions with protective heights from 120-1,920 mm. Also offered in 14 and 30 mm resolutions, GuardShield Cascadeable Micro 400 consists of Type 4, 3-box curtain for small assembly machines. With operating range of 30 m, GuardShield Safe 4 PAC is available as 2-segment pair with 600 mm protected height or 3-segment pair with 840 mm protected height.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jun 17, 2009 Offered as hardware-independent solution, PowerINSPECT is used to check dimensions of parts, prototypes, and tooling against CAD data. Interface facilitates undertaking of basic tasks as well as adding/deleting points during inspection from measurements defining any feature. Program can use data within geometric features in various ways and allows for display of feature measurements as surface points for comparison with CAD model. Inspection may also be halted during measurement process.

PTi - Processing Technologies International, LLC.    Aurora, IL 60502
Jun 17, 2009 Offered in monolayer or coextrusion formats, GLOBALINE® produces sheet from materials such as PP, PS, PET, and polylactic acid in widths of 40 or 60 in. It can be configured for production outputs between 650-3,900 lb/hr. Design includes linear bearing mounted frame infrastructure; pivoting extruder base via hydraulic jacking system, simplifying screw removal/maintenance; and touchscreen controls. Available in NPE version for inline thermoforming or full-length for producing roll stock.

VEGA Controls Ltd    West Sussex RH15 9NF  United Kingdom
Jun 17, 2009 VEGAMET 391 can monitor remote tanks for theft of product/leakage or link to multi-pump system to respond to demand changes. It can take single 4-20 mA analog or HART input and compute level, flow (with totalizer), distance, weight, or temperature. Up to 6 relay alarms can be configured for standard tasks as well as tendency monitoring, and 2 modes of operation lets users evenly utilize, monitor, and control pumps as well as send notification of any failure from up to 4 digital inputs.

Casella USA    Amherst, NH 03031
Jun 17, 2009 Casella NOMAD(TM) features sensors for wind speed/direction, temperature, humidity, solar radiation, air pressure, and rainfall and supports up to 4 more sensors. Aluminum system weighs less than 30 lb and incorporates built-in solar panel for power and SENSUS data-logger with 512K internal memory, on-board data display, and support for Compact Flash memory cards. Included PC software provides data management and unit can be communicated with via laptop/telephone/radio modem.

Kontron    Poway, CA 92064
Jun 17, 2009 Suited for air- and conduction-cooled environments, VM6250 6U VME CPU Board features Freescale MPC8640/8641 single or dual-core processors and Altivec engine. With 64-bit MPX bus running up to 667 MHz, unit boost memory bandwidth up to 4.3 Gbit/s. Four-channel DMA controller and 128-bit AltiVec vector unit speed data processing. Consuming 27 W, board includes high-speed backplane switch for PCIe, Gigabit Ethernet, and double-edged source synchronous transfer VME 2eSST according to ANSI/VITA 1.5.

Maxpro Technologies    Fairview, PA 16415
Jun 17, 2009 Transportable gas bottle mounted charging system hooks on to gas bottle to boost gas (nitrogen, inert gases, oxygen) to 4,350 psig max. One source drives and feeds booster system, which accepts inlet pressures to 3,000 psi. Solution includes adjustable 1,450-4,350 psig automatic shut-off, CGA connection, and hose. It is engineered to provide compact, portable high-pressure gas solutions to industries such as oil and gas or heavy equipment maintenance.

MAG IAS, LLC    Erlanger, KY 41018
Jun 17, 2009 Featuring 6 ft wide footprint, SPECHT® 500/630 builds on 5 basic configurations with more than 100 options. Base machine begins as 500 or 630 mm pallet machining module with direct drive B-axis table, 10,000 rpm CAT-40 spindle, 40-pocket tool disc and changing unit, and Fanuc 32i control. Directly coupled ballscrews deliver 197 fpm speed and 20 ft/sec² acceleration, while moving table design eliminates column movement during machining for 0.0002 in. accuracy and 0.00015 in. repeatability.

Composite Advantage    Dayton, OH 45420
Jun 17, 2009 FiberRigg is constructed with continuous glass fibers to provide strength and stiffness and also features polymer makeup to resist chemicals and water degradation. FRP composite pad can span soft areas while supporting high concentrated loads and has non-slip wear surface. Available in bio-resins, such as corn and soy, product features embedded nylon strap handles and can be ordered in safety yellow or custom colors, as well as circular shapes or rectangular with rounded corners.

ThinGap LLC    Ventura, CA 93003
Jun 17, 2009 With ability to deliver controllable high speed/high shaft power without gearbox, TG14010 brushless DC ring motor can be used for direct drive ducted-fan applications in unmanned aerial vehicles and hub-mounted motors for unmanned ground vehicles. Unit supplies 50 ft-lb peak torque from 3.7 in. length by 13.55 in. dia package that weighs only 23 lb. It conserves energy with gyroscopic effect that reduces vibration, and can be mounted inside wheel hub of vehicle propulsion systems.

Vista-CCTV    Wokingham RG41 5TS  United Kingdom
Jun 17, 2009 Suited for places with entry/exit barriers, automatic number plate recognition bollard cameras can be used as stand alone units or in conjunction with VNPR software. IR LED illumination ensures that reliable images can be collected day and night, no matter what the lighting conditions. Each unit comes completely pre-configured, and they provide reliable operation in car parks, retail parks, airports, and hotels.

Starrett, L.S., Co., The    Athol, MA 01331 1915
Jun 17, 2009 Featuring triple-tempered M-42 cobalt high speed steel teeth, electron-beam welded to fatigue-resistant alloy steel backing strip, Versatix MP Blade design dissipates heat during cutting to minimize tooth breakage and maximize saw blade life. They come in range of sizes and thicknesses from ¾ x .035 to 2 5/8 x .063 in., and in selection of variable, positive-rake pitches from 2-3 to 6-10P. Versatix is also available in coil and welded-to-length configurations.

Allegro MicroSystems Inc.    Worcester, MA 01615
Jun 17, 2009 Designed for ferrous target applications, true zero-speed, 3 wire ATS667LSG consists of Hall-Effect IC and samarium cobalt magnet configuration in single overmolded module. IC contains compensating circuit designed to eliminate detrimental effects of magnet and system offsets, and device package is lead free, with 100% matte tin lead frame plating. Device is intended for digital gear-tooth sensing applications within automotive market.

Calex Mfg. Co., Inc.    Concord, CA 94520
Jun 17, 2009 Operating on common 24 V, 7 mA PLC high speed counter input, Model 8540 is designed for use with platinum 100 W RTD over temperature range of -100 to 400°C. Model 8540 is calibrated to the 0.00385 coefficient and output frequency is 100 Hz at -100°C to 5,100 Hz at +400°C, providing 12 bit resolution. Housed in 3.78 x 1.06 x 1.65 in. plastic case with built in DIN rail mounting foot, UL 508 and UL 1604 compliant unit is suited for remote temperature monitoring applications.

Lamar Lighting Co., Inc.    East Farmingdale, NY 11735
Jun 17, 2009 Offering bi-level or full on/off control options, OccuSmart HF features high frequency motion sensor which can be mounted behind diffusers of fixtures, whereby sensor is undetectable yet offers coverage pattern of up to 40 ft. Product also has built in ambient light sensor, which can be used to keep lamps off as needed during daylight hours. UL listed lighting suits enclosed fixture types such as parking garage luminaires, recessed troffers, or corridor and restroom lighting.

Miyano Machinery USA, Inc.    Wood Dale, IL 60191
Jun 17, 2009 With 0.1 µm input tolerance, GN-3200 is suited for second operation finishing work and hard turning of heat treated components. It has maximum turning diameter of 45 mm and maximum turning length of 50 mm. Unit features heat-symmetric machine frame and bed, wing type headstock, and separate coolant tank that eliminates chances of thermal distortion over time and ensures heat generated by machining is not transmitted to machine body. Compact machine measures only 2.3 x 4.8 ft.

Centorr/Vacuum Industries, Inc.    Nashua, NH 03062
Jun 17, 2009 Multipurpose LF series is suited for high temperature vacuum or inert gas treatment of metals and ceramics, reactive studies and small scale sintering studies. It has operating temperature of up to 2,000°C in vacuum or in inert gas and offers all metal hot zone of 3 in. dia by 5 in. high with ultra clean tungsten mesh heating elements and tungsten/molybdenum heat shields. Operating pressure ranges from 2 psig to vacuum of 10-3 or 10-6 Torr depending on vacuum system selected.