Mobile Awareness, LLC    Solon, OH 44139-2660
Jun 17, 2009 Designed to prevent backing accidents on commercial, off-road, lift truck, and construction vehicles, SenseStat(TM) SE simultaneously monitors 4 zones at rear of vehicle, indicating area closest to object. System can be mounted directly to vehicle, vertically or horizontally. Available in wired and wireless versions, SenseStat features LED display to indicate direction or location of obstacle, display blanking until reverse gear is engaged, and stop-line adjustment feature.

Phonak Communications AG    Murten   Switzerland
Jun 17, 2009 Intended for small teams of mobile professionals, Condor System is comprised of palm-sized radio unit, discrete under-the-shirt wiring, and user's choice of Phonak headset. License-free system allows up to 6 colleagues to communicate at distances up to 800 m in full-duplex mode while additional colleagues listen in via same closed network. Condor does not require base station and is therefore 100% mobile.

BinMaster    Lincoln, NE 68507
Jun 17, 2009 Part of SmartBob cable-based inventory tracking system, SmartBob C-50 enables monitoring of multiple bins equipped with SmartBob sensors from single C-100 Control Console. Expansion console interfaces with C-100 to provide multiple 4-20 mA outputs and centralizes all outputs to single location. C-50 connects to C-100 via dedicated RS-485 cable; C-100 is connected via daisy-chained RS-485 network to monitor data from 1-120 SmartBob2 or SmartBob-TS1 sensors.

Telegesis (UK) Limited    Marlow   United Kingdom
Jun 17, 2009 Featuring 19 x 25 mm footprint, ETRX3 ZigBee Module is available in standard and PA/LNA versions with onboard antenna or Hirose U.FL connector for connection of external antennae. Device's EM357 SOC consists of fully integrated 2.4 GHz IEEE 802.15.4 ZigBee transceiver based on 32-bit ARM Cortex M-3 core. Operating from 2.1-3.6 V supply, module consumes 800 nA in deep sleep mode. Expanded on chip memory includes up to 192 KB Flash and 12 K RAM.

Z-Communications, Inc.    San Diego, CA 92126
Jun 17, 2009 Operating from 350-700 MHz with 0-10 Vdc tuning voltage range, V350ME52-LF features typ phase noise of -99 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 45 MHz/V. RoHS-compliant voltage-controlled oscillator delivers typ output power of 4 dBm at 5 Vdc supply while drawing 13 mA (typ) over -40 to +85°C range. It comes in 0.5 x 0.5 x 0.22 in. MINI-14S package and is suited for automated surface mount assembly and reflow.

Beckhoff Automation LLC    Minneapolis, MN 55337
Jun 17, 2009 Powered by Intel® Core(TM)2 Duo or Core(TM)2 Quad CPUs on Beckhoff ATX motherboard, C66xx series facilitates access to all internal components, which may be upgraded are needed. While model C6640 measures 14.6 x 12 in. x 7.9 in. and features all upwards-facing connections, C6650 has up to 2 hard drives built into removable frames and on-board RAID controller. Both control cabinet PCs have on-board graphics and 10/100 Mbit Ethernet adapters as well as 3 free PCI and 3 PCIe x1 slots.

Axiomatic Technologies Corp.    Mississauga, ON L4Z1Z8  Canada
Jun 17, 2009 Packaged for IP67 rating with M12x1 connectors, Model AX060200 features CANbus, RS-232, and analog output ports for multiple functionality. Inclinometer is designed to measure inclination angles in 2 orthogonal sensing directions X and Y in range up to ±90º. If vertically installed, it can measure inclination angle in one sensing direction in ±180º range. Angles are measured by 2-axis MEMS sensor, which senses acceleration caused by gravity force.

Y-Connect, Inc.    Middletown, PA 17057
Jun 17, 2009 Duplex and Quad LC Adapters include modularized multiport dust shutter providing dust as well as eye protection for Class III A and lower lasers. Units offer secure panel mount latching and are compatible with T.I.A. FOCIS 10B duplex and quad panel cutouts, allowing users to double connection densities using existing simplex or duplex SC adapter panel cutouts, respectively. Available in MM, SM, and APC, products meet UL 94 V-0 flammability requirements and are RoHS compliant.

Y-Connect, Inc.    Middletown, PA 17057
Jun 17, 2009 Suitable for singlemode (SM) and multimode (MM) applications, SC and LC adapters are available with phosphorous bronze sleeve and provide reliable connections between SC and LC connectors. Simplex LC-SC Hybrid adapter is designed with secure panel mount latching and compatible with TIA FOCIS 10B. LC-SC Hybrid adapter, available in MM and SM is offered in blue, beige, green, and black; meets UL 94 V-0 flammability requirements; and is RoHS-compliant.

Turck USA    Minneapolis, MN 55441
Jun 17, 2009 Designed to detect piston position on pneumatic cylinders, Q25L magnetically actuated linear displacement sensor features blind zone of 20.5 mm on each end and is available with measuring ranges of 100, 125, 160, and 200 mm. It detects position of piston on standard pneumatic cylinders by utilizing series of Hall elements that sense piston magnet and send signal back to processor. Repeat accuracy is less than 0.1% of measuring range, and linear deviation is less than 1% of FS.

Rockwell Automation    Milwaukee, WI 53204
Jun 17, 2009 Equipped with integrated laser alignment system, GuardShield Safe 4 transmitter and receiver pair is available in 14 and 30 mm resolutions with protective heights from 120-1,920 mm. Also offered in 14 and 30 mm resolutions, GuardShield Cascadeable Micro 400 consists of Type 4, 3-box curtain for small assembly machines. With operating range of 30 m, GuardShield Safe 4 PAC is available as 2-segment pair with 600 mm protected height or 3-segment pair with 840 mm protected height.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jun 17, 2009 Offered as hardware-independent solution, PowerINSPECT is used to check dimensions of parts, prototypes, and tooling against CAD data. Interface facilitates undertaking of basic tasks as well as adding/deleting points during inspection from measurements defining any feature. Program can use data within geometric features in various ways and allows for display of feature measurements as surface points for comparison with CAD model. Inspection may also be halted during measurement process.

PTi - Processing Technologies International, LLC.    Aurora, IL 60502
Jun 17, 2009 Offered in monolayer or coextrusion formats, GLOBALINE® produces sheet from materials such as PP, PS, PET, and polylactic acid in widths of 40 or 60 in. It can be configured for production outputs between 650-3,900 lb/hr. Design includes linear bearing mounted frame infrastructure; pivoting extruder base via hydraulic jacking system, simplifying screw removal/maintenance; and touchscreen controls. Available in NPE version for inline thermoforming or full-length for producing roll stock.

VEGA Controls Ltd    West Sussex RH15 9NF  United Kingdom
Jun 17, 2009 VEGAMET 391 can monitor remote tanks for theft of product/leakage or link to multi-pump system to respond to demand changes. It can take single 4-20 mA analog or HART input and compute level, flow (with totalizer), distance, weight, or temperature. Up to 6 relay alarms can be configured for standard tasks as well as tendency monitoring, and 2 modes of operation lets users evenly utilize, monitor, and control pumps as well as send notification of any failure from up to 4 digital inputs.

Casella USA    Amherst, NH 03031
Jun 17, 2009 Casella NOMAD(TM) features sensors for wind speed/direction, temperature, humidity, solar radiation, air pressure, and rainfall and supports up to 4 more sensors. Aluminum system weighs less than 30 lb and incorporates built-in solar panel for power and SENSUS data-logger with 512K internal memory, on-board data display, and support for Compact Flash memory cards. Included PC software provides data management and unit can be communicated with via laptop/telephone/radio modem.

Kontron    Poway, CA 92064
Jun 17, 2009 Suited for air- and conduction-cooled environments, VM6250 6U VME CPU Board features Freescale MPC8640/8641 single or dual-core processors and Altivec engine. With 64-bit MPX bus running up to 667 MHz, unit boost memory bandwidth up to 4.3 Gbit/s. Four-channel DMA controller and 128-bit AltiVec vector unit speed data processing. Consuming 27 W, board includes high-speed backplane switch for PCIe, Gigabit Ethernet, and double-edged source synchronous transfer VME 2eSST according to ANSI/VITA 1.5.

Maxpro Technologies    Fairview, PA 16415
Jun 17, 2009 Transportable gas bottle mounted charging system hooks on to gas bottle to boost gas (nitrogen, inert gases, oxygen) to 4,350 psig max. One source drives and feeds booster system, which accepts inlet pressures to 3,000 psi. Solution includes adjustable 1,450-4,350 psig automatic shut-off, CGA connection, and hose. It is engineered to provide compact, portable high-pressure gas solutions to industries such as oil and gas or heavy equipment maintenance.

MAG IAS, LLC    Erlanger, KY 41018
Jun 17, 2009 Featuring 6 ft wide footprint, SPECHT® 500/630 builds on 5 basic configurations with more than 100 options. Base machine begins as 500 or 630 mm pallet machining module with direct drive B-axis table, 10,000 rpm CAT-40 spindle, 40-pocket tool disc and changing unit, and Fanuc 32i control. Directly coupled ballscrews deliver 197 fpm speed and 20 ft/sec² acceleration, while moving table design eliminates column movement during machining for 0.0002 in. accuracy and 0.00015 in. repeatability.

Composite Advantage    Dayton, OH 45420
Jun 17, 2009 FiberRigg is constructed with continuous glass fibers to provide strength and stiffness and also features polymer makeup to resist chemicals and water degradation. FRP composite pad can span soft areas while supporting high concentrated loads and has non-slip wear surface. Available in bio-resins, such as corn and soy, product features embedded nylon strap handles and can be ordered in safety yellow or custom colors, as well as circular shapes or rectangular with rounded corners.

ThinGap LLC    Ventura, CA 93003
Jun 17, 2009 With ability to deliver controllable high speed/high shaft power without gearbox, TG14010 brushless DC ring motor can be used for direct drive ducted-fan applications in unmanned aerial vehicles and hub-mounted motors for unmanned ground vehicles. Unit supplies 50 ft-lb peak torque from 3.7 in. length by 13.55 in. dia package that weighs only 23 lb. It conserves energy with gyroscopic effect that reduces vibration, and can be mounted inside wheel hub of vehicle propulsion systems.