Bulbrite    Moonachie, NJ 07074
Jun 22, 2009 Available in 2.1 W Candelabra base and 2.5 W Medium base, BULBRITE Chandelier LEDs can be used as direct energy efficient retrofit solutions for 15 and 20 W incandescent light bulbs, respectively. Each LED produces up to 25 W of illumination with only 2 W of energy consumption. Providing high quality warm white light, LEDs deliver full 360° of total illumination and provide average long life of 30,000 hr.

Elobau Sensor Technology, Inc.    Lake Bluff, IL 60044
Jun 22, 2009 Based on non-contact Reed switch technology, 145NTG is designed to be incorporated in knob of joystick or multi-functional handle for shifter, or into control panel. Switching power is 5 W/VA under 48 V maximum switching voltage, with maximum switching current of 0.3 A and operating range of -40 to +85ºC. Featuring IP67 class rubber boot, push button has bicolor lighting, different standard colors for actuator cap, and can be customized to accommodate specific symbols.

Speedheat US, LLC    Woodstock, GA 30188
Jun 22, 2009 With sizes ranging from 20-300 ft² with options for 120 V systems up to 150 ft² and 240 V systems for 60-300 ft², TileWarm(TM) DIY features micro-thin element that is less than 1/16 in. and causes no floor buildup. Kit includes heaters needed for coverage specified, continuity monitors for each heater, SecuraMat(TM) protective membrane, and installation information/accessories needed. Shielded, helically wound element with full ground surround eliminates risk of overheating.

Neutrik    Lakewood, NJ 08701
Jun 22, 2009 Providing optional screen to chassis grounding and sealing gasket for lockable and watertight digital interface connection, HDMI 1.3 feedthrough connector models NAHDMI-W and NAHDMI-W-B are suited to transmit any digital TV and PC video format including HDTV. Universal D-Shaped chassis connectors are available with either nickel or black housing.

Tornado® Industries, Inc.    West Chicago, IL 60185
Jun 22, 2009 Equipped with twin two-stage, 1.6 hp vacuum motors, Marathon Carpetrinser family of upright extractors deliver fast/thorough cleaning and drying. Models 2-100, 2-200, and 2-400 provide 100, 200, and 400 psi, respectively. Model 2-400 also includes Perfect Heat(TM) technology, which generates temperatures up to 212°F with no additional electrical power needs.

Hobart Brothers Co.    Troy, OH 45373-2900
Jun 22, 2009 Designed as general fabrication welding wire for mild or low alloy steels, FabCO® Hornet gas-shielded flux-cored welding wire can be used in all positions with either 100% CO₂ or 75% Ar/25% CO₂ shielding gas mixture. Available in 0.045, 0.052 and 1/16 in. dia, unit produces flat bead profile and suits both single- and multi-pass applications. It has typical impact strength of 75 ft-lb at -20°F when used with mixed shielding gas.

Norwood Marking Systems, A Div. Of ITW    Downers Grove, IL 60515
Jun 22, 2009 Customizable ThermalPak(TM) Traversing System is suited for use on variety of horizontal-form-fill-seal and IV bag forming machines that produce multiple lanes and multiple rows of packages per cycle. With 300 dpi resolution, it can print fixed and variable text, graphics and multiple bar code formats, and each print head can print at speeds up to 9.84 in./sec. Servo-driven linear ball screw actuator helps achieve traversing speed of up to 15.35 in./sec.

Rex-Cut Products, Inc.    Fall River, MA 02720
Jun 22, 2009 Available in 4½, 5, and 7 in. dia x 7/8 sizes, Rex-Cut® SIGMA ceramic flap discs feature ceramic abrasive grains bonded to treated material that is layered and stacked to provide aggressive and controlled stock removal with minimal pressure. Offered in 36 and 60 grit versions, with or without hubs, units are suited for use on stainless steel, mild steel, and exotic metals. These are also available with 5/8-11 adapters.

Pinpoint Laser Systems    Peabody, MA 01960
Jun 22, 2009 Capable of measuring 2 linear axes X and Y and their 2 angular components yaw and pitch, 4 axis Microgage Receiver operates over distances of 100 ft or more and delivers measuring precision of 0.0005 in. and 0.005°. Digital display in unit provides precise linear and angular readings. Laser beam provides measuring reference line and unit measures where laser line lands on internal detector and determines position of machine or sub-assembly relative to this laser reference beam.

Malish Corp., Plastic Div.    Willoughby, OH 44094
Jun 22, 2009 Diamabrush(TM) System is comprised of 4 tools, each designed to be used on standard low pressure commercial cleaning machines for concrete floor polishing, mastic removal, and hardwood prep. A 25 grit spring metal tool prepares concrete floor for epoxy recoating, and 6 tools, from 100-2,00 grit, are used to grind and hone. Other offerings include Diamabrush(TM) Mastic Removal Tool and Diamabrush(TM) Hardwood Prep Tool to remove polyurethane off of hardwood floors.

Weiler Corporation    Cresco, PA 18326 0149
Jun 22, 2009 Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in ½, ¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in., while knot wire (hollow end) brushes are available in ¾ and 1 1/8 in. with 7/8 in. trim length.

WAGO Corp.    Germantown, WI 53022
Jun 22, 2009 TP-343+ thermal transfer printer creates high-stability markings that are smudge-proof immediately after printing, as well as resistant to industrial chemicals and mechanical abrasion. It can print on wire markers and heat shrink tubing on continuous reel and supports ProServe 5.2's Smart Designer and Smart Marking functions. Features include an integrated label sensor and guiding block for WAGO marker strips.

Tripp Lite    Chicago, IL 60609
Jun 22, 2009 Designed for wall mounting, SmartRack(TM) SRW12US enclosure accommodates all standard 19 in. equipment. Hinged cabinet swings away from wall bracket for equipment access, while vented door and side panels allow airflow exceeding server manufacturer requirements. Suited for use in smaller IT environments, network remote locations, cramped wiring-closets, or offices, unit can become mobile floor-unit using optional caster kit.

Telco Intercontinental Corp.    Houston, TX 77095
Jun 22, 2009 Available in 1, 2, and 3 pole versions, DP Contactor (Definite Purpose Contactor) suits HVAC as well as elevators, power supplies, food processing, lights, pool, spa, pumps, hoists, cranes, and agriculture applications. Unit is rated for 20-40 A of current in 1, 1½, and 2 pole versions, and 20-50 A in 3 pole version. Model with 3 poles has interchangeable screw and box lug terminals, and max of 3 auxiliary contacts blocks are available.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jun 22, 2009 Aremco-Bond(TM) 2200 glass-fiber and Kevlar reinforced epoxy-novolac compound is suited for bonding ceramic and metal wear plates used to insulate chutes, ducts, and centrifuges, and repairing defects in corroded linings and stacks to 400°F. Tensile shear strength is 2,400 psi and flexural strength is 13,400 psi, and product is resistant to acids, alkalis, organic fluids, and salts. Electrical insulating properties include dielectric strength of 460 V/mil and volume resistivity of 1.0 x 10¹⁵.

NewAge Industries Inc.    Southampton, PA 18966
Jun 22, 2009 Suited for moderate non-hydraulic pressure applications, Kwik Clamp(TM) nylon hose clamps feature double row of durable teeth to ensure strong bond that will not vibrate loose. Made from U.L.-listed, black, nylon 6-6, they cannot corrode or rust and are light weight, non-conductive, and may be reused. Over 30 sizes are offered and range from ¼-4¼ in. nominal OD.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Jun 22, 2009 Designed for air service, compact AV4425 OLPBWL can be incorporated into air service stations or inside cabinets on trucks and incorporates constant tension without latch pawl. Unit uses jump guard to eliminate possibility of hose jumping off spool due to extremely violent return or operator error. Wire braid hose is available to resist abrasion and crushing.

PolyScience Div. Of Preston Industries Inc.    Niles, IL 60714 4588
Jun 22, 2009 Designed to maximize bench space, LS-Series are available with centrifugal or turbine pump, while LM- and MM-Series come with 2 different centrifugal pumps. LS-Series has working temperature range of -20 to +40°C and provides 475 W of cooling at -10°C; LM-Series works in temperature range of -10 to +30°C and 230 W cooling capacity at -10°C; and MM-Series has working temperature range of -5 to +50°C and provides 130 W of cooling at -5°C.

Westfall Mfg. Co.    Bristol, RI 02809-2721
Jun 22, 2009 Capable of injecting 4 chemicals simultaneously, Model 2800 in-line static mixer mounts directly into piping system and features fixed-plate with internal design that rapidly mixes using combination of alternate vortex shedding and intense shear zone turbulence. Available in sizes from ¼ to 120 in. dia, unit can be made from PVC, FRP, SST, Titanium, Hastelloy®, and carbon fiber. It utilizes Saf-T-Flo(TM) retractable injectors and can incorporate from 1-6 injection nozzles.

Ahsay Systems Corporation Limited    Hong Kong   China
Jun 22, 2009 Ahsay Backup Software v5.5.3.0 features Ahsay Redirector add-on module which allows service providers to add extra backup servers to system as online backup business grows, without reconfiguring settings on client applications. It is integrated with StorageCraft's ShadowProtect and Microsoft Windows System Backup to offer automatic remote offsite backup and restore.