Fairchild Semiconductor    San Jose, CA 95134
Jul 14, 2009 Housed in 12-bump, 0.5 mm pitch CSP package, Model FAN5902 operates at 6 MHz with 0.5 µH chip inductor. Converter helps extend talk-time by up to 40 min in 3G handsets by adapting voltage supply level of 3G RF power amplifier according to RF power sent through antennae. Offering up to 800 mA rms current output and 50 mW on resistance bypass FET, Model FAN5902 enables operation down to 2.7 V. Device also addresses key problem of overheating in RF power amplifier.

Remmon Remote monitoring Ltd.    Bet-She'an valley 10800  Israel
Jul 14, 2009 Intended for direct measurement and external reading of remote devices and sensors, R-Lite-Web logs data at minimum sample rate of 1 min and sends it to Web server via cellular network. Data can be viewed on Remmon's secured site, and system also provides 24/7 global communication coverage for automatic SMS alert messages, SMS I/O inquiries, and SMS I/O settings. It is designed to meet control and management requirements of applications in security/energy/fluid transport industries.

FUTEK Advanced Sensor Technology, Inc    Irvine, CA 92618
Jul 14, 2009 Available in 17-4 stainless steel, LCM300 Tension/Compression Load Cell features male threads on both ends and 10 ft long, 28 AWG 4 conductor shielded PVC cable. USB output eliminates need for analog amplifier, power supply, and display equipment. Measuring 1.20 in. in height x 1.00 in. in diameter, device has nonlinearity of ±0.5% and deflection of 0.001 in. nominal. It supports research and lab applications in fields of medicine, industrial ergonomics, and sports science.

Montech, LLC    Huntersville, NC 28078
Jul 14, 2009 Able to carry weights above 100 kg, Series TB is constructed with metal parts of nickel steel or stainless steel and incorporate aluminum covers for chains and pinions. Drive rollers are protected against dust and dirt by rear cover, while quick closures and minimal use of locking screws facilitate maintenance. Available in 6 frame widths from 60-250 mm, single- or double-belt conveyors feature 230/400 V motor that can achieve belt speeds from 0.6-38.4 m/min.

Dynapar    Gurnee, IL 60031
Jul 14, 2009 Built to order, Acuro(TM) AR62 has battery-less and gear-less design that relies on pulse-wire technology to provide up to 16 bits of multi-turn resolution. Oversized bearings promote operational life, while coatings and seals protect electronics in wash-down and even submersible applications. Featuring 32 mm installed height and -40 to +100°C operating range, encoder will withstand shock and vibration up to 200 g and is available with range of communication interface options.

DJ Products, Inc.    Little Falls, MN 56345
Jul 14, 2009 Using battery-powered, walk-behind Electric Aircraft Tug, one person can safely maneuver aircraft in and out of tight spaces in hangers or in staging on ramp. Smooth acceleration and braking systems eliminate rough starting/stopping of gas-powered clutching systems. Tug is suited for any aircraft towing applications up to 15,000 lb for individual, FBO, or corporate aircraft ground equipment.

Screen Tight, Custom Extrusion Division    Georgetown, SC 29440
Jul 14, 2009 Intended for second floor or higher porch applications, MINItrack(TM) consists of ¾ x ¾ in. clips that attach to trim or wooden frame and 8, 10, or 12 ft long extruded powder-coated aluminum channels. Channels are available in white or bronze finishes and snap over clips for clean, professional look. Offering unlimited trim possibilities, MINItrack is suited for any housing style and blends in without visible obstructions.

ABB Instrumentation    Warminster, PA 18974
Jul 14, 2009 Available in 1.5-84 in. sizes, WaterMaster magmeter is inherently submersible (IP68) unit but may also be buried and incorporates DSP to promote performance as well as enable real-time measurements. Octagonal sensor design for sizes up to 8 in. optimizes flow profile while reducing upstream and downstream piping requirements. Signal filtering also improves measurement accuracy by reducing fluid and electrode noise. HART protocol enables online parameter modification/monitoring.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Jul 14, 2009 Available in 10 and 12 in. diameters with 5/8 or 1 in. center holes, Signature Line Chop Master blade cuts any wood or composite material and has angled carbide points for minimized cutting pressure without bottom splintering, side scoring, or vibration. Unit features corrosion-resistant C-4 micrograin carbide saw blade tips, optimal perimeter concentricity, minimal noise, and side runout to ±.001 in. as well as -5° hook to control feed rate.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
Jul 14, 2009 Driven by ¼ or ½ hp 3-phase 230 V TEFC AC electric motors, 650 Series inverter-duty variable speed gearmotors are designed for long life variable frequency drive operation with continuous duty torque outputs from 148-717 lb-in. Verdant Duty(TM) AC gearmotors consists of 5 models with gear ratios from 27.6-214.5:1. Units are suited for conveying and dynamic load application.

Rohde & Schwarz GmbH & Co      Germany
Jul 14, 2009 Model FSV40 measures 1 GHz span at 1 kHz resolution in 2.5 sec and provides internal tracking generator of up to 7 GHz for scalar network analysis. Microwave generators can be connected to attain frequencies up to 40 GHz. Inherent noise of -139 dBm at 40 GHz combined with +18 dBm third-order intercept allows measurement of spurious emissions without distortions at high sensitivity. Features include touchscreen and on-screen keyboard for manual alignments.

Stackpole Electronics Inc.    Raleigh, NC 27604
Jul 14, 2009 Available in resistance values from 0.01 W up to 5 KW, 4 W molded surface mountable wirewound SM 4 features TCR as low as 20 ppm, and resistance tolerances down to 0.1%. It offers standard operating voltage of 100 V, and can be customized to handle higher voltage, energy, or power. Suited for industrial and commercial applications with harsh environmental conditions, unit can be built in non-inductive Ayton-Perry winding, or can be given variety of fusing characteristics.

Supertex Inc.    Sunnyvale, CA 94619
Jul 14, 2009 Featuring closed loop system for efficiency, 3 channel HV9985 delivers high LED current accuracy, suited for driving multiple strings of backlight or edgelight LEDs in LCD TVs. It contains 3 peak current mode controllers, and Gate drivers optimized for driving logic level FETs at 0.25 A sourcing or 0.5 A sinking. Each output current can be individually dimmed via linear or PWM dimming methods. IC is available in 40-lead QFN and 44-lead QSOP packages.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Jul 14, 2009 Featuring sharp, tactile response with 180 ±50 gf force and 0.2 ±0.1 mm travel, TL1220 is rated for mechanical life of 500,000 cycles minimum. It has contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW (initial max) at 1.5 Vdc, and insulation resistance of 100 MW (minimum at 500 Vdc). Dielectric strength is 500 Vac and operating temperature is -20 to 70°C. Applications include telecom, consumer electronics, audio/visual, medical, and computer/peripherals.

Flexaust Co., Inc., The    Warsaw, IN 46581
Jul 14, 2009 Available in 1.5 and 2 in. ID sizes in standard 25 and 50 ft lengths with plain finish and gray color, Flexaust Genesis® FLX Plus suits portable industrial applications such as wet/dry vacuum cleaners, car washes, and trim evacuation conduit. Crush-resistant polyethylene copolymer hose is engineered with double-profile construction that is reinforced with integral polyethylene helix. Abrasion-, chemical-, and detergent resistant unit moves smoothly over rough surfaces.

Phihong USA    Fremont, CA 94539
Jul 14, 2009 Including single 9-, 12-, 15-, and 24 V models, 18 W, universal, 3-wire input, PSAA18U are rated to operate between 0-40°C and in 0% and 90% noncondensing humidity. Energy efficient units feature minimum average operating efficiency of 80.3% and maximum noload power consumption of 0.3 W. Measuring 4.06 x 1.93 x 1.32 in., they come with standard 2.1 x 5.5 mm DC barrel output connector, IEC320 C14 inlet receptacles, and weighs 4.94 oz. They are cUL/UL60950-1, IEC60950-1, and CE approved.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jul 14, 2009 Operating at DC and from 10 Hz to 100 kHz, single unit U8903A audio analyzer helps engineers and technicians measure audio performance in applications such as wireless audio, analog components and ICs, and consumer audio. It features 5.7 in. color display and one-button selection of major operating modes. Application note describing compatible equivalent commands and providing sample test programs comparing old R2D2 codes with U8903A SCPI commands appears in automated applications.

BETE Limited    East Sussex East Su BN8 4HZ  United Kingdom
Jul 14, 2009 Compact Orbitor rotary spray ball can fit through small, restricted access flanges, and suits cleaning-in-place applications (CIP) in food, brewing, beverage, dairy, chemical, and pharmaceutical industries. It can handle tank sizes from 8-16 m in radius, as well as larger tanks of up to 32 m dia. Available in 2, 4, or 8 nozzle configurations, unit operates with pressures of 3-12 Bar and maximum temperature of 95°C, and provides 360° and 180° down and up wash patterns.

Transduction    Mississauga, ON L4W5A1  Canada
Jul 14, 2009 Powered by telecom grade SBC that includes Intel® Core 2 Quad, Core 2 Duo, or Celeron D processors with 800/1066/1333FSB, models TR-6190 and TR-6001 feature NEMA 4 19 and 15 in. TFT LCD screen with matching USB resistive touchscreen. They come with Dual Gigabit LAN, 2 x USB 2.0, 2 x COM, and 1 x LPT ports as well as 2 x ISA and 4 x PCI expansion slots. Operating temperature is 0-60°C at full system load, while input power options include 110/220 Vac and 12, 24, 48, 125, and 250 Vdc.

GAO Tek Inc.    Toronto M1B2K4  Canada
Jul 14, 2009 Utilizing TDR technology along with analysis software, Model 6130 analyzes status of cable. It is used to test underground cables to discover impedance break points in HFC systems and locate cable damages, tie-in dampness, and terminal impedance failure. Unit is capable of testing 25, 50, 75, and 100W impedance cables at lengths of up to 2 Km and provides electronics map relevant to time domain picture so that fault can be detected easily.