Laurel Electronics, Inc.
Costa Mesa, CA 92626
Feb 20, 2007 In load cell applications, Laureate Model TA-WM powers up to four 350 W load cells in parallel using built-in, isolated 10 Vdc, 120 mA excitation supply. Connection to bridge can be via 4 or 6 wires. With 4-wire hookup, transmitter operates in ratiometric mode to eliminate errors due to supply variations. With 6-wire hookup, it also compensates for variations in transducer lead resistance. DIN rail mount unit is accurate to 0.01% FS ±2 counts at update rates to 60/sec.

Dressta North America
Buffalo Grove, IL 60089
Feb 20, 2007 Combining torque converter or direct drive system with clutch-brake steering, Models TD-7M, TD-8M, TD-9M, and TD-10M provide engine power of 74, 85, 93, and 101 hp, respectively. Caliper disc-type steering clutches and brakes are spring applied and hydraulically released. Machines are equipped with left-hand joystick control, right foot pedal for engine deceleration, and left pedal for braking. Overall size is within 8 ft 6 in. width limit for legal transportation.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Feb 20, 2007 Adaptable to wide variety of meter designs, Model MCP3909 has two 16-bit delta-sigma ADCs onboard that can be accessed through its SPI interface, while simultaneously providing pulse output with frequency proportional to active-power calculation. Housed in 24-pin SSOP package, unit features 0.1% typical measurement error over 1,000:1 dynamic range and consumes only 4 mA, making it suited for single- and 3-phase industrial and consumer energy meters.

Meller Optics, Inc.
Providence, RI 02940
Feb 20, 2007 Manufactured as thin as 0.018 in. depending on diameter, optical grade high-purity sapphire wafer carriers feature flatness and parallelism to 0.0025 mm and can incorporate flats and laser markings. They are chemical-, chip- and scratch-resistant, with hardness of 9 Moh, and can be supplied polished or ground. Custom fabricated carriers are transparent for thinning of GaAs, indium phosphide, silicon, and other semiconductors.

Logopress
Pouilley Les Vignes 25115  France
Feb 20, 2007 SolidWorks-based Logopress3 2007 incorporates Intelligent Animation command, which automatically performs interference and collision detection throughout die while showing entire die operating as if it were in press. Animation includes strip lifting and advancing with each press stroke. Design to achieve SolidWorks Gold Certification, software helps ensure mistakes are caught at design stage in automotive, electronics, and appliance industries.

ASSA ABLOY Identification Technologies
65396 Walluf   Germany
Feb 20, 2007 Offering seamless interoperability with telematic infrastructure components, LAN-enabled OMNIKEY Secure Interoperable Chip Card Terminals (SICCT) are designed to ensure patient-oriented, coordinated treatment. Integrated contactless read unit enables applications with RFID cards, such as comfort PIN for physicians, while combination of connector and SICCT reader ensures security of data communication. Solution also works with Healthcare Professional Card.

ON Semiconductor, LLC
Phoenix, AZ 85008
Feb 20, 2007 Supplied in 1.2 x 1.2 x 0.5 mm SOT-723 packages, NTK313xx devices feature low RDS(on) values for over 200 mA operating current and 1.5 V low gate voltage to allow direct control from power management ASIC or other controllers. Series, which utilizes Trench technology and offers integrated ESD protection, is suited for load/power switching applications and small signal interface switching. While NTK3134N us 20 V, 890 mA, N-Channel MOSFET, NTK3139P is -20 V, -780 mA, P-Channel MOSFET.

SEICA Inc.
Salem, NH 03079
Feb 20, 2007 Expandable via optional in-circuit test and visual inspection software modules, AERIAL minimizes time needed for board development while promoting test flexibility. Programming and operation can be accomplished by any user for testing prototypes, samples, and small- to medium-sized production runs. Four independent mobile probes enable simultaneous, double-sided testing, while One Touch Per Net technique is used to characterize net and identify faults on subsequent test boards.

Preso/ a division of Racine Federated Inc.
Racine, WI 53406
Feb 20, 2007 Made of brass, Fire Pump Flow Meter Systems are protected against overload by diaphragm housing design. PFA Ellipse, PFV Venturi, and PFB Annular pitot tube models, available for 2-16 in. pipe sizes, include dust-tight case, direct-readout gauge with dial featuring 270° arc, and operator-selectable gpm or lps water flow readings. When pressure difference exceeds range, gauge accepts accidental application up to 60 psig without damage.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Feb 20, 2007 MSP430FG461x series ultra-low power MCUs feature up to 120 Kbytes flash and up to 8 Kbytes RAM memory, allowing development of real-time applications completely in modular C libraries with full backward compatibility. Offered with up to 3 op amps, devices include 200 kS/sec 12-bit A/D and 1 µs code-to-code settling time 12-bit D/A converters. They operate from single coin cell for up to 10 yr, consuming less than 2 µA in real-time clock standby mode.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Feb 20, 2007 Featuring power flattening technology and V(BAT) tracking, Model RF3196 utilizes PowerStar® power control technology to optimize TRP and SAR performance. RoHS-compliant unit minimizes current variation by 50% into non-ideal 3:1 loads. Optimized Total Radiated Power maximizes network efficiency, network coverage, and data throughput rates while minimizing frequency of dropped calls.

CGI Inspection
Eden Prairie, MN 55344
Feb 20, 2007 Used as stand-alone product or in combination with Cross Sectional Scanning System, Spec.Check v4.07 utilizes standard ASCII point cloud data to register part in 3D space, which enables rapid measurement and reporting of any external or internal dimension, slope, angle, or radius. Time for first article inspections and tooling qualifications is minimized through program's template functions.

Flexaust Co., Inc., The
Warsaw, IN 46581
Feb 19, 2007 Reinforced with coated spring steel wire helix, Flexaust® FLX-Thane® SE is self-extinguishing and halogen-free. Smooth interior promotes air flow, while construction exhibits abrasion, chemical, cut, and puncture resistance. Manufactured using FDA-acceptable materials, hose has 4:1 compression ratio and operates from -65 to +225°F. It comes in 2-24 in. and 60-300 mm ID sizes, with 0.030 in. wall, and 25 or 50 ft standard lengths.

Advantech Automation Corp.
Cincinnati, OH 45240
Feb 19, 2007 Along with Windows 2000/XP and Linux, open-platform UNO-3074 supports Windows XP (SP2) embedded with write protection (EWF) with preconfigured image that has optimized onboard device drivers. Connectivity is offered via 2 RS-232 ports, 2 RS-232/422/485 ports with RS-485 automatic flow control, 2 10/100 Ethernet ports, 4 USB ports, and 4 PCI-bus expansion slots. Other features include 512 Kb battery-backup SRAM, 4-channel isolated digital input, and 4-channel isolated digital output.

New England Urethane, Inc.
North Haven, CT 06473
Feb 19, 2007 Supplied in clear-to-transparent pellets, Neusoft® Urethane Blend is used to produce soft feel and touch in medical, consumer, and industrial products. Material, which is offered in Shore A hardnesses of 50, 60, and 70, can be injection molded, extruded, or blow molded. It covers range of applications, including those requiring films, and supports integration of various additives or fillers to meet unique application requirements.

Material Transfer & Storage, Inc.
Allegan, MI 49010 0218
Feb 19, 2007 As modular system, Material Master(TM) safely unloads bulk bags of semi-free flowing powders and automatically fills cylindrical canisters by volume. Components include Flo-Master(TM) massaging system to promote material flow, Flo-Lock(TM) slide gate for partial bag discharging, and Sure-Seal System(TM) for dust-tight discharge. Design also incorporates volumetric feeder, custom operator access platform, and canister fill station with product densifier.

Measurement Computing Corp.
Norton, MA 02766
Feb 19, 2007 Based on 9513 Series chip, 5-channel, 16-bit Model USB-4301 features one 8-bit dedicated input port and one 8-bit dedicated output port. Model USB-4303 is based on two 9513 chips and provides 10 channels. Packaged in impact-resistant ABS plastic enclosure measuring 5 x 3.5 x 0.4 in., both modules have 2 rows of 24 clearly labeled screw terminals for wiring in lab or in field.

Cincinnati Incorporated
Cincinnati, OH 45211 0111
Feb 19, 2007 Combining 5,000 W GE Fanuc laser resonator and 10,000 ipm linear motor drive, Model CL-850 cuts through 18 ga steel at 1,000 ipm and up to 1 1/8 in. mild steel plate. Windows XP Professional-based control provides intuitive menus so virtually anyone familiar with PCs can operate machine. Available with 5 x 10 ft or 6 x 12 ft cutting table, Model CL-850 features dual pallet design that allows one table to be unloaded/reloaded while second table is being processed.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 19, 2007 Available in 8 case sizes from 4.0 x 4.0 x 5.3 mm to 10 x 10 x 14 mm, 153 CRV Series features voltage ratings from 6.3-100 V and minimum operating life from 2,000-3,000 hr at 105°C. Charge- and discharge-proof, units withstand surge voltages up to 1.15 times rated voltage and reverse voltages up to 1 V. RoHS-compliant capacitors are suited for filtering, smoothing, buffering, and decoupling in industrial controls, domestic appliances, automotive systems, and telecom equipment.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 19, 2007 Measuring 0.40 x 0.40 in. with 0.157 in. height profile, Series IFLP4040DZ01 is specified for saturation currents from 20-36 A and inductance values from 0.34-0.62 µH with standard inductance tolerance of ±20%. Featuring 0.88 mW DCR and ferrite as its core material, inductors handle high transient current spikes without hard saturation and operate at frequency up to 5 MHz. Units are housed in RoHS-compliant package and operate from 55 to +125°C.