LumaSense Technologies    Santa Clara, CA 95054
Jul 28, 2009 Designed for continuous-duty monitoring, Mikron PULSAR III aids in reaction furnace temperature control. Non-contact solution exceeds T/C temperature ranges in one, linear, and continuous scale of 662 to 3,632°F. Two wavelengths can be measured using same optics for continuous and instantaneous measurement of Refractory Temperature, Gas Temperature, and Integrated Temperature in vessel away from heat, vibration, and corrosive gases.

HMS Industrial Networks, Inc.    Chicago, IL 60607
Jul 28, 2009 Operating on 24 V power supply and consuming 100 mA, DIN rail-mounted Anybus Communicator connects automation devices such as temperature sensors, barcode readers, motor controllers, and measuring instruments via Modbus interface to Profibus networks. Communicator acts as slave on Profibus side and master on Modbus side, supporting baudrates from 1,200 Baud up to 56 kbit/s. In RS-485 mode, product can connect up to 31 serial Modbus devices to Profibus.

Linear Technology Corp.    Milpitas, CA 95035
Jul 28, 2009 Supplied in 5 x 5 mm plastic QFN SMT package, LT5578 has active, double-balanced design and operates from 400 MHz to 2.7 GHz to support all allocated LTE (Long-Term Evolution) broadband wireless services. At 900 MHz, mixer offers 27 dBm Output IP3 linearity and noise floor of -160.5 dBm/Hz at output level of -5 dBm. IC also has 1.4 dB conversion gain with integrated RF balun transformers that provide single-ended RF output and Local Oscillator input.

noax Technologies Corp.    Huntersville, NC 28078
Jul 28, 2009 Based on lead-gel accumulator, noax uninterruptible power supply (UPS) allows noax industrial PCs (IPCs) to remain in constant operation for up to 1 hr in case of unexpected power loss, voltage sags, or spikes. Even if battery/connection failure occurs, UPS software will recognize problem and shut down IPC according to user-programmed sequence after certain time. Solid-state unit also integrates voltage reversal, short circuit, battery discharge protection.

Crouzet    San Diego, CA 92154
Jul 28, 2009 Operating on its own, connected to PLC, or driven by potentiometers, 140 x 98 x 33 mm Model BDE40 works with most 3-phase brushless DC Hall effect motors. It offers 4-quadrant functionality and load resistor protection and is suited for applications requiring standard forward and reverse motor control as well as closed-loop speed control for motor slowing and stopping. Controller delivers up to 360 W with 11-36 Vdc, 10 A nominal, and max continuous current of 14 A.

Gardner Denver Nash    Trumbull, CT 06611
Jul 28, 2009 NASH Vectra XL 750 liquid ring vacuum pump and compressor offers vacuum pump operation up to 28.5 in. Hg and compressor operation to 30 psig. It features o-ring sealing, ductile iron construction, as well as single point inlet and discharge connections, which eliminates need for manifolds, simplifying process piping.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jul 28, 2009 Designed for both RF and signal contacts, 38999 Series connector supports up to 128 contacts with EMI shielding. It is 100% scoop proof and employs corrosion-resistant aluminum alloy shell with cadmium over nickel plating. Suited for harsh industrial, petroleum, avionics, military/commercial aircraft, and satellite applications, connector is capable of withstanding 500 hr of salt spray exposure. Custom designs and space-grade materials are also available.

Larson Systems Inc    Minneapolis, MN 55449
Jul 28, 2009 Measuring 7 x 1.4 x 3.5 in., Tiger CNC mounts directly on control panel of spring coiling machine. Digital gage allows spring manufacturers to sort springs directly through coiler's electronics without requiring separate computer interface. Unit is available with 2 software packages: Tiger and Super Tiger.

Doosan Infracore American Corporation    Suwanee, GA 30024
Jul 28, 2009 Capable of generating 139 ft-lb of torque to take deep cuts in tough metals, HP 5100 combines 14,000 rpm spindle speed, 1.5 sec tool-to-tool changes, and 2,362 ipm rapid traverses. It comes with dual rotary tables and shuttle APC capable of changing pallets in 7.8 sec. Measuring 19.6 x 19.6 in., pallets support work pieces up to 31.5 x 35.4 in., weighing max. of 1,100 lb. Centers have 40 taper spindle supported by 4 precision class, permanently lubricated bearings.

Powr-Flite    Fort Worth, TX 76140
Jul 28, 2009 Environmentally friendly, multistep Diamabrush concrete polishing floor system includes Millennium floor machine, concrete tool, and 5 different blades varying from 100 to 2,000 grit. Different grit blades allow user to choose desired floor finish level from moderate gloss to high-gloss, retail-store-like finish.

Lee Company, The    Westbrook, CT 06498 0424
Jul 28, 2009 Available with 1-, 2-, 3-, and 4-place standard manifolds, Lee VHS Injection Manifold Mount System allows for precise injection of fluid into flow stream. Any ported VHS micro-dispense valve can be mounted so that outlet port is in close proximity to flow stream, minimizing captive capillary volume and increasing injected volume. To allow for future expansion and design flexibility, boss plugs are available to seal any unused valve ports in manifold.

L-Com, Inc.    North Andover, MA 01845
Jul 28, 2009 Suited for range of voice, video and data applications, right angle TDG1026KC-R5E Cat 5E coupler fits standard .765 x .585 in. keystone openings. Coupler offers true 90° connectivity to address tight fit applications involving wall plates and some panel designs.

Instron    Norwood, MA 02062-2643
Jul 28, 2009 Suited for any application requiring measurement of linear strain, universal MFX 500 is used to determine calculations including modules, offset yield, and plastic (non-proportional) elongation to failure. Unit is controlled via USB interface and Instron 3300 and 5500 Series testing machines with Bluehill® 2 software. Featuring roller style mounting, unit provides resolution of 0.1 µm and meets ISO 9513, ASTM E83, and EN10002-1/ISO 6892 requirements.

Larco    Brainerd, MN 56401-0547
Jul 28, 2009 Designed for automatic indoor and outdoor entryway applications, Blue Diamond Backlit Wall Switch provides blue backlighting, allowing for visibility in poorly lit areas and at night. Switch incorporates energy efficient monolithic constant-current regulator, light guiding, and LED technology. CE certified, customizable switch is available in 4.5 in. square version with stainless steel or brass finish, as well as with variety of logos and face decals.

Instron    Norwood, MA 02062-2643
Jul 28, 2009 Utilizing linear motor technology, ElectroPuls E10000 and E10000 Linear-Torsion are capable of running slow-speed static tests through to dynamic tests at frequencies over 100 Hz. Both are capable of up to 10,000 N, and E10000 Linear-Torsion features combined linear-torsion actuator for bi-axial tests. Features include stiffness tuning wizard to ensure achievement of critical loads, T-slot table for flexible test set ups, and electrically operated crosshead lifts.

L-Com, Inc.    North Andover, MA 01845
Jul 28, 2009 NEMA rated 240 V equipment enclosures offer variety of options including heaters, cooling fans, vented enclosures, as well as ABS plastic/fiberglass construction. Available in 12 models, enclosures feature built-in universal Euro style power plugs, eliminating need for plug adapters or converters.

HASCO Hasenclever GmbH + Co KG    Ludenscheid D-58513  Germany
Jul 28, 2009 Offered in 22 or 26 mm OD, compact internally mounted round latch locking device Z178/... does not increase dimensions of mold and ensures accurate graduation of plate opening movements. It allows strokes of up to 55 mm, which can be variably defined by shortening pulling rod, and housing can be cut to length to adapt to relative plate thickness. Other features include dampened stroke limit stop and positive-lock positioning.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Jul 28, 2009 M3 finger-operated Hall-effect joystick is suited for in-cab panel controls, portable radio control systems, and pendant control boxes. Unit is sealed to IP54 and is available with several handle configurations, including push-button and mechanical interlock in gate.

Ecliptek Corporation    Costa Mesa, CA 92626
Jul 28, 2009 Designed to address key clocking applications, 2.5 Vdc Model EH27 and 1.8 Vdc Model EH29 measure 5.0 x 7.0 x 1.6 mm, while 2.5 Vdc Model EH37 and 1.8 Vdc Model EH39 measure 3.2 x 5.0 x 1.3 mm. Miniature LVCMOS oscillators are available in variety of configurations with frequency stabilities as low as ±20 ppm max, operating temperature of -45 to +85°C, and frequency from 2.500-166.000 MHz. Some applications include networking, test equipment, WLAN, GigE, and computer peripherals.

Ecliptek Corporation    Costa Mesa, CA 92626
Jul 28, 2009 Supplied in 2.0 x 2.5 x 0.9 mm SMD package, EH56/EH57/EH59 are available in 1.8, 2.5, or 3.3 Vdc configurations and address key clocking applications. Characteristics include frequency stabilities as low as ±20 ppm max, operating temperature range as wide as -45 to +85°C, and frequencies from 3.300 up to 100.000 MHz. Applications are varied, and options include tri-state (high impedance) and duty cycle of 50% ±5%.