GAO FiberOptics Inc.    Toronto   Canada
Jul 15, 2009 Hot-swappable 1000Base-CWDW GBIC transceiver plugs into 802.3z standards-compliant GBIC port or slot of Cisco switch or router in fiber-optic networks. Suited for telecom and data communications applications, product is designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

GAO Instruments Inc.,    Toronto   Canada
Jul 15, 2009 Multifunctional E1/Datacom tester A0300021 performs channel testing, alarm analysis, signal analysis and fault location on digital networks, and provides various protocol converters with one-way and bidirectional bit-error-rate (BER) test functions. Handheld tester saves and recalls 10 user-defined setups and 10 sets of results, which can be uploaded and printed via Test Manager Software. It has monochromatic backlit LCD screen and works continuously for up to 6 hr on single charge.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Jul 14, 2009 Providing single-wire installation, 4.3 in. wall-mount Model TPMC-4SM delivers room control, power, and communication via Ethernet. As standalone touchpanel, unit features direct network connectivity with RoomView(TM) Server Edition software to provide enterprise room scheduling. Users can view room calendars and check availability status of all rooms throughout buildings and reserve rooms in real time. Applications include classrooms, conference rooms, and hotel rooms.

HBM, Inc.    Marlborough, MA 01752 3014
Jul 14, 2009 Engineered for stand-alone testing, SoMat eDAQ and eDAQlite systems provide signal conditioning and capacity to perform range of on-board data processing, triggering, and complex mathematical computations. Fully sealed systems are modular and flexible, with support range of vehicle bus and GPS options. Utilizing standard Ethernet communications, products host their own web servers, with configurable IP addresses, and do not require software to start/stop test or upload data.

Hitex Development Tools    Sunnyvale, CA 94086
Jul 14, 2009 Designed for flexibility, Tanto2-FPGA uses hardware base designed to integrate proprietary interfaces without excessive effort. All signals are accessible and can be controlled via test and measurement board and logic analyzer. Due to Altera FPGA (Stratix II), system supports designs with up to 3 million ASIC gates; complex interfaces, such as LVDS; and high clock rates. Test and verification effort is reduced by I/O that allows, for example, routing of tracebus for debug functions.

Fairchild Semiconductor    San Jose, CA 95134
Jul 14, 2009 Housed in 12-bump, 0.5 mm pitch CSP package, Model FAN5902 operates at 6 MHz with 0.5 µH chip inductor. Converter helps extend talk-time by up to 40 min in 3G handsets by adapting voltage supply level of 3G RF power amplifier according to RF power sent through antennae. Offering up to 800 mA rms current output and 50 mW on resistance bypass FET, Model FAN5902 enables operation down to 2.7 V. Device also addresses key problem of overheating in RF power amplifier.

Remmon Remote monitoring Ltd.    Bet-She'an valley 10800  Israel
Jul 14, 2009 Intended for direct measurement and external reading of remote devices and sensors, R-Lite-Web logs data at minimum sample rate of 1 min and sends it to Web server via cellular network. Data can be viewed on Remmon's secured site, and system also provides 24/7 global communication coverage for automatic SMS alert messages, SMS I/O inquiries, and SMS I/O settings. It is designed to meet control and management requirements of applications in security/energy/fluid transport industries.

FUTEK Advanced Sensor Technology, Inc    Irvine, CA 92618
Jul 14, 2009 Available in 17-4 stainless steel, LCM300 Tension/Compression Load Cell features male threads on both ends and 10 ft long, 28 AWG 4 conductor shielded PVC cable. USB output eliminates need for analog amplifier, power supply, and display equipment. Measuring 1.20 in. in height x 1.00 in. in diameter, device has nonlinearity of ±0.5% and deflection of 0.001 in. nominal. It supports research and lab applications in fields of medicine, industrial ergonomics, and sports science.

Montech, LLC    Huntersville, NC 28078
Jul 14, 2009 Able to carry weights above 100 kg, Series TB is constructed with metal parts of nickel steel or stainless steel and incorporate aluminum covers for chains and pinions. Drive rollers are protected against dust and dirt by rear cover, while quick closures and minimal use of locking screws facilitate maintenance. Available in 6 frame widths from 60-250 mm, single- or double-belt conveyors feature 230/400 V motor that can achieve belt speeds from 0.6-38.4 m/min.

Dynapar    Gurnee, IL 60031
Jul 14, 2009 Built to order, Acuro(TM) AR62 has battery-less and gear-less design that relies on pulse-wire technology to provide up to 16 bits of multi-turn resolution. Oversized bearings promote operational life, while coatings and seals protect electronics in wash-down and even submersible applications. Featuring 32 mm installed height and -40 to +100°C operating range, encoder will withstand shock and vibration up to 200 g and is available with range of communication interface options.

DJ Products, Inc.    Little Falls, MN 56345
Jul 14, 2009 Using battery-powered, walk-behind Electric Aircraft Tug, one person can safely maneuver aircraft in and out of tight spaces in hangers or in staging on ramp. Smooth acceleration and braking systems eliminate rough starting/stopping of gas-powered clutching systems. Tug is suited for any aircraft towing applications up to 15,000 lb for individual, FBO, or corporate aircraft ground equipment.

Screen Tight, Custom Extrusion Division    Georgetown, SC 29440
Jul 14, 2009 Intended for second floor or higher porch applications, MINItrack(TM) consists of ¾ x ¾ in. clips that attach to trim or wooden frame and 8, 10, or 12 ft long extruded powder-coated aluminum channels. Channels are available in white or bronze finishes and snap over clips for clean, professional look. Offering unlimited trim possibilities, MINItrack is suited for any housing style and blends in without visible obstructions.

ABB Instrumentation    Warminster, PA 18974
Jul 14, 2009 Available in 1.5-84 in. sizes, WaterMaster magmeter is inherently submersible (IP68) unit but may also be buried and incorporates DSP to promote performance as well as enable real-time measurements. Octagonal sensor design for sizes up to 8 in. optimizes flow profile while reducing upstream and downstream piping requirements. Signal filtering also improves measurement accuracy by reducing fluid and electrode noise. HART protocol enables online parameter modification/monitoring.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Jul 14, 2009 Available in 10 and 12 in. diameters with 5/8 or 1 in. center holes, Signature Line Chop Master blade cuts any wood or composite material and has angled carbide points for minimized cutting pressure without bottom splintering, side scoring, or vibration. Unit features corrosion-resistant C-4 micrograin carbide saw blade tips, optimal perimeter concentricity, minimal noise, and side runout to ±.001 in. as well as -5° hook to control feed rate.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
Jul 14, 2009 Driven by ¼ or ½ hp 3-phase 230 V TEFC AC electric motors, 650 Series inverter-duty variable speed gearmotors are designed for long life variable frequency drive operation with continuous duty torque outputs from 148-717 lb-in. Verdant Duty(TM) AC gearmotors consists of 5 models with gear ratios from 27.6-214.5:1. Units are suited for conveying and dynamic load application.

Rohde & Schwarz GmbH & Co      Germany
Jul 14, 2009 Model FSV40 measures 1 GHz span at 1 kHz resolution in 2.5 sec and provides internal tracking generator of up to 7 GHz for scalar network analysis. Microwave generators can be connected to attain frequencies up to 40 GHz. Inherent noise of -139 dBm at 40 GHz combined with +18 dBm third-order intercept allows measurement of spurious emissions without distortions at high sensitivity. Features include touchscreen and on-screen keyboard for manual alignments.

Stackpole Electronics Inc.    Raleigh, NC 27604
Jul 14, 2009 Available in resistance values from 0.01 W up to 5 KW, 4 W molded surface mountable wirewound SM 4 features TCR as low as 20 ppm, and resistance tolerances down to 0.1%. It offers standard operating voltage of 100 V, and can be customized to handle higher voltage, energy, or power. Suited for industrial and commercial applications with harsh environmental conditions, unit can be built in non-inductive Ayton-Perry winding, or can be given variety of fusing characteristics.

Supertex Inc.    Sunnyvale, CA 94619
Jul 14, 2009 Featuring closed loop system for efficiency, 3 channel HV9985 delivers high LED current accuracy, suited for driving multiple strings of backlight or edgelight LEDs in LCD TVs. It contains 3 peak current mode controllers, and Gate drivers optimized for driving logic level FETs at 0.25 A sourcing or 0.5 A sinking. Each output current can be individually dimmed via linear or PWM dimming methods. IC is available in 40-lead QFN and 44-lead QSOP packages.

E-Switch Inc.    Brooklyn Park, MN 55428 1514
Jul 14, 2009 Featuring sharp, tactile response with 180 ±50 gf force and 0.2 ±0.1 mm travel, TL1220 is rated for mechanical life of 500,000 cycles minimum. It has contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW (initial max) at 1.5 Vdc, and insulation resistance of 100 MW (minimum at 500 Vdc). Dielectric strength is 500 Vac and operating temperature is -20 to 70°C. Applications include telecom, consumer electronics, audio/visual, medical, and computer/peripherals.

Flexaust Co., Inc., The    Warsaw, IN 46581
Jul 14, 2009 Available in 1.5 and 2 in. ID sizes in standard 25 and 50 ft lengths with plain finish and gray color, Flexaust Genesis® FLX Plus suits portable industrial applications such as wet/dry vacuum cleaners, car washes, and trim evacuation conduit. Crush-resistant polyethylene copolymer hose is engineered with double-profile construction that is reinforced with integral polyethylene helix. Abrasion-, chemical-, and detergent resistant unit moves smoothly over rough surfaces.