GAO Tek Inc.    Toronto M1B2K4  Canada
Aug 06, 2009 Combining OTDR and Intelligent Bridge Testing functions in one unit, telephone cable fault locator, model 98 allows examination of all kinds of patch cords, ribbon or bunched pigtails and installation and maintenance of fiber optic, telecommunication and CATV networks. Product features LCD screen, backlight display, low voltage warning, automatic power off and energy-saving design. It has dead zone distance of less than 1 m, and detects breaks and micro-bends even for jacketed fibers.

Hyson Products, Associated Spring    Brecksville, OH 44141
Aug 06, 2009 Nitrogen gas springs are engineered to withstand temperatures to 248°F. Series of compact rod-sealed gas springs includes 2 models, MT16 and MT24, with threaded upper cylinders for easy mounting. Four other models complete the line and feature initial forces from 675-2,100 lbs. Charge pressure is fully adjustable on each spring, and there is wide variety of mounting options.

Shin-Etsu Microsi, Inc.    Phoenix, AZ 85044
Aug 05, 2009 SINR series siloxane-based negative photoresist film, available in 12-100 micron thicknesses, will flow into vias to produce void-free dielectric fill and planarized surface. Suited for 3D Through-Silicon Vias (TSVs) and 2D wafer bonding applications, vacuum laminated dry films exhibit minimal residual stress with 90 MPa modulus that produces rubbery consistency and minimizes wafer bow. Dielectric constant is as low as 2.6, and built-in adhesion promoters ensure optimal bonding.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Aug 05, 2009 Displayport-Based TCON provides power management technology for DisplayPort®-based notebooks with TFT LCD monitors and integrates Power Smart technology into existing IDT PanelPort(TM) solutions. Unit contains VPP1606 embedded DisplayPort timing controller with LED backlight control, VPA2000 power IC that generates 6 different output voltages, and VPA1100 external boost switch providing voltage to drive LED. Functional blocks are integrated to minimize redundancy/optimize performance.

Pentek Inc.    Upper Saddle River, NJ 07458
Aug 05, 2009 Built upon half-length x8 PCI Express 2.0 carrier board, 7800 Series hosts PMC/XMC module to fulfill software radio, data acquisition, and beamforming applications. Using protocols such as Xilinx Aurora and Serial Rapid I/O, interconnections support communication between multiple 7800 Series boards independent of backplane. Built-in fan provides forced-air cooling, while 4-pin standard disk drive power connector accepts power directly from PC power supply to augment PCIe slot power.

AXIOMTEK    Taipei   Taiwan
Aug 05, 2009 Powered by 1.60 GHz Intel® Atom(TM) N270 CPU with 533 MHz FSB, SBC84832 is built around Intel 945GSE chipset with Generation 3.5 Intel Integrated Graphics Engine, Intel GMA 950, and ICH7M Southbridge. RoHS-compliant, 3.5 in. SBC is fanless and supports CRT as well as LVDS LCD dual-view displays. Expansion is made possible via one PCIe mini card, and connectivity of fostered by range of I/O options. One DDR2 SODIMM on board implements up to 2 GB of system memory.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 Featuring built-in decoding and advanced filtering as well as controller-driven calibration, mTouch(TM) AR1000 analog resistive touchscreen controllers provide universal 4-, 5-, and 8-wire support. Additional support is provided for SPI, I2C(TM), and UART communication interfaces. Integral touchscreen decoding algorithms eliminate trial-and-error engineering by enabling applications to receive fully processed, reliable touch coordinates.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 Model MRF24J40MB adds +20 dBm transmit power via integrated power amp and -102 dBm receive sensitivity via integrated Low Noise Amplifier (LNA) to IEEE 802.15.4-compliant transceiver, PCB antenna, and discrete matching circuitry. On software side, certified ZigBee PRO protocol stack provides another option for IEEE 802.15.4-based wireless networks using 16-bit PIC® MCUs. Combination of ZigBee PRO stack and MRF24J40 forms ZigBee PRO Compliant Platform certified by ZigBee Alliance.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Suited for low-pressure applications in nominal size range from 20-140 ccm, PGZ Series 1X gerotor pump is offered in 4 flange/shaft versions and has 200-3,000 rpm speed range. Design minimizes operating noise while optimizing viscosity range and exhibits favorable priming properties. Used on its own or in combination with other pumps, product is designed for cooling, filtering, and lubricating circuits with operating pressures up to 15 bar in industrial and mobile applications.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Based on electrically variable pumps, zero displacement motors, and intelligent control electronics, Hydrostatic Brake Management System prevents diesel engine from overspeeding. Braking algorithm, which is stored in BODAS controller, moves pump back instantly when pressure is applied to brake pedal, reducing geometric displacement of pump accordingly. Pressure-relief valves fitted to all hydrostatic travel drives allow system to achieve braking effect greater than drag torque of engine.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 Supplied in 16-pin TSSOP, MRF49XA covers 434/868/915 MHz unlicensed Industrial, Scientific, and Medical (ISM) RF band. Compatibility with suite of development tools facilitates integration with any 8-, 16- or 32-bit PIC® MCU, enabling designs for various bidirectional, short-range wireless applications such as remote controls, remote meter reading, and home security/alarms.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 With total of 49 instructions, PIC16F193X Series optimizes program code and data handling. Units include up to 14 KB flash program memory, up to 512 Bytes data RAM, and 256 Bytes data EEPROM. nanoWatt XLP technology on LF versions results in sleep currents of 90 nA, Watchdog Timer current of 500 nA, and 32 kHz timer oscillator current of 600 nA, all at 1.8 V. Additional features include LCD drive, mTouch Sensing Solutions peripheral for capacitive touch sensing, and optimized C support.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 As axial piston pumps for power take-offs (PTOs) on utility vehicles, A18 series features auto-suction capacity and is based on oblique axis principle. Aluminum housings lessen vehicle weight and reduce load on PTO. While A18FDO dual-circuit constant pump produces 2 separate delivery flows with mutually independent pressure levels to 400 bar, A18VO adjustable pump with axial piston drive operates from 350-400 bar and delivers adjustable volume flow based on required delivery volume.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 With 210 bar nominal pressure (250 bar max), 53 Series A10VNO28 pump has compact design featuring variable displacement as well as pressure and flow control. Size 85 is also available. With 250 bar nominal pressure (310 bar max), 53 Series A10VO offers range of control functions and comes in nominal size 18. As alternative to differential pressure control (load-sensing), it also offers hydraulic-mechanical power control or electroproportional flow control.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 Operating from 1.8-5.5 V, PIC18F1XK22 series incorporates up to 16 Kb Flash program memory, 64 MHz internal oscillator, and peripheral set with support for mTouch(TM) capacitive touch sensing. Integrated nanoWatt XLP technology enables sleep currents down to 34 nA typ at 1.8 V; Timer1 oscillator currents of 800 nA at 1.8 V, 32 kHz typ; and Watchdog Timer currents of 300 nA at 1.8 V typ. MCUs also offer Master Synchronous Serial Port with SPI/I2C(TM) interface and address masking.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Both AN2/30 angle sensor and KMB4 draft sensor enhance quality of electrohydraulic hitch control (EHR) systems. Former utilizes non-contact measuring principle that permits all measuring ranges up to 360°. Configuration of several Hall elements renders sensor insensitive to mechanical tolerances and temperature. With KMB4 draft sensor, measuring element is permanently secured in sleeve via crimp technology. This minimizes hysteresis and increases characteristic-curve stability.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Tensioning connectors can be slid or swiveled into groove, simplifying joining of 2 profiles and allowing retrofit into existing applications. Adapted to profiles with 8 and 10 mm grooves, units work with all profile cross sections in Basic Mechanical Elements modular system. They are also available in ESD-compatible versions, able to withstand bending loads of up to 35 and 110 Nm and sliding forces of maximum 1,000 and 3,500 N.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 05, 2009 Featuring nanoWatt XLP technology, PIC24F04KA201 16-bit MCUs enable remote sensors powered by energy harvesting or sealed-battery applications to run for up to 20 yr. Deep Sleep mode isolates power to various circuits during sleep, minimizing power consumption. Units include 32 MHz internal clock, for up to 16 MIPS operation, 4 KB Flash, 512 bytes SRAM, 10-bit A/D converter, and serial communications modules. They are available in 14- and 20-pin packages.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Model A10VO 32 Series axial piston pump generates little noise and features drive that maximizes rotational speeds and efficiency. Available in sizes 71-140 and with max pressure of 280/350 bar, unit is resistant to suction-pressure dips and housing-pressure peaks. Its controller offers sealing that prevents leakage, while safeguard feature provides resistance to dirt and contamination. Pump is offered with 2- or 4-hole flange.

Bosch Rexroth AG Industrial Hydraulics      Germany
Aug 05, 2009 Modular directional valves provide working pressures of up to 310 bar. Compact, zinc-plated units are scalable and expandable and offer simplified tailoring to workflow requirements. Individual sections can be added as required, which come in various size options and with common interface. Variety of portings and coil connections are available and sectional valves can be combined with other components to create hybrid systems.