SMP Sintermetalle Prometheus GmbH & Co KG    Graben-Neudorf   Germany
Jul 20, 2009 Using core materials made of powder composites specifically engineered for individual application, Inductive Chokes have low eddy current and hysteresis losses. Through encapsulated design, chokes also achieve low-intensity stray fields, enabling other components to be placed in close vicinity without risk of magnetic interaction. Maintenance-free, RoHS-compliant units have been tested and approved for use in offshore installations.

Ramtron International Corp.    Colorado Springs, CO 80921
Jul 20, 2009 Housed in 48-pin FBGA package, 8 Mb Model FM23MLD16 is organized as 512 K x 16 nonvolatile memory, accessed within industry standard parallel interface. Access time is 60 ns and cycle time is 115 ns. Device reads and writes at bus speeds for NoDelay(TM) writes with endurance of 100 trillion writes and 10-year data retention. Operating from 2.7-3.6 V, surface-mount solution features high-speed page mode that enables 8-byte burst read/write operations at up to 33 MHz.

CRAIC Technologies Inc.    San Dimas, CA 91773
Jul 20, 2009 Combining advanced microspectroscopy with sophisticated software, QDI 2010 Film(TM) non-destructively measures thickness of thin films of photovoltaic cells by either transmission or reflectance. With sampling areas ranging from over 100 microns across to less than 1 micron, instrument can analyze many materials on both transparent and opaque substrates. Features such as contamination analysis and transmissivity testing can be added to instrument.

Pick Heaters, Inc.    West Bend, WI 53095
Jul 20, 2009 Available in variety of materials and pressure ratings, Series DS is intended for applications having stable steam demand, typically within 2:1 or 3:1 turndown ratio. With nozzle positioned at center of desuperheater, water is sprayed axially, in direction of steam flow. Conical insert with thermal sleeve increases velocity to promote rapid absorption of water, while isolating housing from thermal stress.

Prab Conveyors    Kalamazoo, MI 49003
Jul 20, 2009 Designed for small to medium machining shops and as add-on for larger operations, modular MiniSystem(TM) can reclaim cutting oil and coolants. Unit is fully portable and can be contained in area as small as 4 x 11 x 8 ft. Continuous processing, diagonal shaft wringer comes with bar-end separator and exerts 700 G's of force to extract up to 98% of cutting fluids. Dry chips are produced at rates up to 1,000 lb/hr. Options include feed dumper system, shredder, and 10 micron filter.

Misumi USA    Schaumburg, IL 60173
Jul 20, 2009 Available in Standard and Advanced versions with long or wide blocks and standard or wide rail, Miniature Linear Guides feature dowel holes on rail and block for positioning. Users can disassemble and reassemble mechanism for routine maintenance without need for realignment. In all versions, ball remains retained, even when block is removed from rail. Manufactured to precise dimensional tolerances, guides feature operating temperature range of -20 to 80°C.

ITW Rocol North America    Glenview, IL 60025
Jul 20, 2009 Compact RL-Nozzle is band-sawing nozzle for Minimum Quantity Lubrication that attaches to 2-pump Accu-Lube MQL applicator system. Featuring 2 internal atomizing chambers where lubricant is broken up before being sprayed onto tool. Unit sprays lubricant from 3 different locations and mixes lubricant and air at nozzle, resulting in no lag time or dry cutting. Nozzle maximizes tool life/sawing productivity and minimizes fluid consumption.

Berner International Corp.    New Castle, PA 16101
Jul 20, 2009 Drive-Thru Air Curtain, at 6 x 7½ in. and 20 lb, includes mounting bracket hardware compatible with all manufactured drive-thru window brands. Plugging into 120 V, 15 A receptacle, unit features spring-loaded reusable aluminum-weave air filter system that removes without tools. It also includes on/off rocker switch and 1/20th hp motor. Both 150 cfm or 225 cfm airflow volume/velocity models provide protection from outdoor conditions and prevent insect infiltration.

Bel Fuse, Inc.    Jersey City, NJ 07302 4419
Jul 20, 2009 HomePlug® AV PLC Modules 0804-5000-17 and 0804-5000-18 integrate INT6400/INT1400 chipset for optimized performance. Devices feature MII interface, connecting to embedded systems via 1.27 mm header, and are available in vertical or horizontal configurations. Delivering up to 200 Mbps PHY rate over powerline wiring, units require DC power of 830 mA from 3.3 V supply. They feature 128-bit AES link encryption with key management and support various modulation schemes.

Extrusion Dies, Inc.    Chippewa Falls, WI 54729
Jul 20, 2009 Flat dies with DuraCoat(TM) coating withstand most attacks from corrosive hydrochloric acid (HCl) generated in course of extruding PVC. Coating forms thin film on steel surface of die that has no effect on features machined into flow surfaces. Solution is insolubile in most acids and bases, and also withstands burn-outs without damage.

Knuth Machine Tools USA, Inc.    Lincolnshire, IL 60069
Jul 20, 2009 Equipped with front panel programmable logic controls, R Series is available with columns from 9.5-27.5 in. and maximum reach of 40-124 in, and has drilling capacity up to 4 in. It is equipped with 2-20 hp and offers 8-22 rpm with maximum drilling depth of 10-20 in. Series also features hydraulically operated feed and spindle drives, and comes with coolant system, cube table, and halogen work lamp. Model R60 has 2.4 in. drilling capacity with 14 in. column.

Technical Manufacturing Corp.    Peabody, MA 01960
Jul 20, 2009 Hard-mount active vibration cancellation system, STACIS® FM is designed to control building floor vibrations in semiconductor manufacturing facilities. Unit features extended stroke piezoelectric actuators and hard-mount suspension with no soft air springs. It is available in either 3 or 6 degrees of freedom and starts to isolate below 1 Hz. Stacis technology allows fast settling of isolated payload in response to motorized, stage-induced motion, resulting in increased tool throughput.

Honeywell International, Inc.    Morristown, NJ 07960
Jul 20, 2009 Providing 20 million Mean Cycle To Failure (MCTF) at 25°C, low profile FSS-SMT Series utilizes low power consuming, unamplified, uncompensated Wheatstone bridge circuit design that provides inherently stable millivolt output over force range. Sensor offers low deflection of 30 microns typical at full scale. Applications include occlusion detection, load and compression sensing, and variable tension control in ambulatory, enteral, and infusion pumps, and clinical diagnostic equipment.

Honeywell International, Inc.    Morristown, NJ 07960
Jul 20, 2009 Bipolar Hall-effect magnetic position sensor SS30AT has 4.5-24 Vdc supply voltages and ability to operate at up to 125°C. It features built-in reverse voltage protection and thermally balanced integrated circuit that provides stable operation over full temperature range. Available on tape and reel, device allows for automated pick-and-place assembly, and suits transportation and industrial applications including speed and RPM sensing, tachometer, and motor and fan control.

Brush Research Manufacturing Co., Inc.    Los Angeles, CA 90022
Jul 20, 2009 Featuring small, abrasive globules that are permanently mounted to flexible filaments, ball-style Flex-Hone tool produces optimum plateau surface finish in any type or size cylinder, slide, chamber, magazine tube, or smooth bore barrel. It can be used in any hand drill or rotating spindle and is self-centering and self-aligning to bore. Tool can be used to clean out oxidation and corrosion damage in shotgun barrels, and to remove nicks and pits that cause plastic adhesion.

Kaivac, Inc.    Hamilton, OH 45011
Jul 20, 2009 Using color-coded SmartFloor Pad system, floor cleaning tasks can be organized by location, project, or area. Each pad comes with 4 colored strips; red, yellow, blue, and green. Attaching strip to pad allows user to select one color for each application, reducing inventory, and promoting hygienic cleaning.

InternetSafety.com    Acworth, GA 30101
Jul 20, 2009 As end-point PC/Mac Internet monitoring and filtering service, Safe Eyes Business lets employers curtail unproductive and potentially litigious online behavior by blocking office and mobile user access to select Web content. Individual or group settings are defined through central Web portal, and Internet usage may also be limited to specific times. Users can also be barred from accessing IM programs, social networking sites, and high-bandwidth applications.

Aspen Technology Inc.    Cambridge, MA 02141
Jul 20, 2009 Extending operational benefits of advanced process control and performance management to plant processes, aspenONE V7 Manufacturing and Supply Chain provides guided workflows, which enable engineers to build, test, and deploy multiple control applications. Program also extends integrated refinery planning and scheduling solution to entire petroleum supply chain, allowing integrated oil companies to optimize decisions and visualize impact across petroleum supply chain.

Geometric Technologies    Scottsdale, AZ 85260
Jul 20, 2009 NestLib® 2009 R2 consists of base module and set of optional modules with specialized functionalities for shear nesting, common punch, leather nesting, remnant generation, tube nesting, and common cut. Edge Matching feature, for wood working industry, aids in creation of wooden floorings and rooftops by letting users automatically match slots and keys in parts with those in sheets during nesting. Also, included API distinguishes end-to-end guillotine cuts and internal guillotine cuts.

Zmags Inc.    Ottawa ON K2P 2K9  Canada
Jul 20, 2009 With Zmags Publicator SaaS, marketers can automate conversion of collateral from PDF to interactive format and share digital collateral via social networking sites such as Facebook, Twitter, LinkedIn, and MySpace. ICM solution provides means to digitize and deliver interactive documents to customers, and then measure reading behavior. Self-service solution can share any type of collateral online, including brochures, catalogs, magazines, direct mail, and other business documents.