IBASE Technology Inc.    Taipei   Taiwan
Aug 07, 2009 Based on IBASE IB883 embedded SBC, ASB200-883-6COM features Intel® Atom(TM) N270 processor at 1.6 GHz and Intel® 945GSE chipset. It includes 6 COM ports, 8 programmable GPIOs, 2 USB 2.0 ports, LEDs for power/HDD, and audio jacks for line in/line out connections on front. Several rear panel I/O ports are also incorporated. Compact fanless system measures 240 x 162 x 46 mm and includes DDR2 SO-DIMM socket, 2.5 in. HDD drive bay, and 60 W power adaptor in steel black chassis.

AMS Technologies AG    Munich 82152  Germany
Aug 07, 2009 Available as connectorized PCB array and as complete air-cooled light engine with drive electronics, UNO PLUS Dome Array White Hi-CRI Vari-CCT optimizes color mixing via selection of red, green, blue, amber, and additional white LED chips. Light source accommodates 36 LED chips in aperture of 1 cm² and can generate white light with CCT from 2,800-6,500 K. CRI is greater than 90, and integrated Dom optics enables enhancement of luminous flux to greater than 1,800 lumens at 50 W input.

Daimer Industries Inc    Woburn, MA 01801
Aug 07, 2009 Designed for applications that require only wet-steam, Super Max(TM) 12840SP and 12860SP offer high-pressure chemical injection and can be heated by No. 1 or No. 2 heating oil; diesel; or kerosene. Super High-Temperature Optimized Technology(TM) (Super-HOT(TM)) technology lets both mobile machines generate temperatures up to 330°F and clean with wet steam. Model 12840SP generates pressures to 2,000 psi and flow rates to 4 gpm, while 12860SP respectively produces up to 3,000 psi and 5 gpm.

ELTIMA Software GmbH    Berlin   Germany
Aug 07, 2009 If PDF file is protected only with owner password, Recover PDF Password enables Mac users to drag and drop file into app, press Decrypt, and immediately save copy of file with protection removed. Decryption option is still available if PDF file is protected with unknown user password or both user and owner password. Various methods - password length, template, exhaustive search - are employed to recover lost passwords, and support is provided for all character encodings.

Eaton Corporation    Cornelius, NC 28031
Aug 07, 2009 Combining software, DAQ strategies, and professional services, Foreseer® v5.0 provides visibility into operational state of enterprise-wide facilities infrastructure equipment. Functionality allows for proactive monitoring of critical power, environmental, safety, and security systems from various manufacturers to identify dangerous trends and prevent future failures. With supported Power Xpert® Reporting software, power and energy data can be aggregated into standard report formats.

Daimer Industries Inc    Woburn, MA 01801
Aug 07, 2009 Powered by one 2-stage motor, 1,600 W XTreme Power® XPH-5900IU removes dirt and stains from car interiors and upholstery. Dual tank heating elements produce temperatures up to 210°F and offer heating times of as little as 5 min, while integral low-flow technology reduces water waste and results in drying times down to 2 hr. Weighing 40 lb, mobile cleaning system generates 100 in. of water column lift, 100 cfm of airflow, and 60 psi of pump pressure.

Waddell Display Cases    Greenfield, OH 45123
Aug 07, 2009 Waddell® Spirit Series includes 3 sizes, each made with anodized aluminum framing, sliding tempered glass doors, and 4 half-length adjustable shelves. Cases range in length from 48-72 in., but all measure 72 in. high x 16 in. deep (including 12 in. high base). Along with optional cornice/lighting fixture to further highlight accomplishments/memorabilia, series offers choice of 3 frame finishes; White Laminate, Mirror, or Plaque Fabric backings; and 10 possible laminate accent colors.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Aug 07, 2009 Available in sizes from ½-515 cu-ft, Model 42NSD features discharge screw positioned across entire length of trough, and powered by separate direct drive system for independent speed control. Close tolerances between screw and trough provide positive flow and discharge force, enabling use of extrusion die when blender is being used for pasty materials. Blender is suited for both dry and fluid blending applications in chemical, food, pharmaceutical, and plastics industries.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Aug 07, 2009 Impervious to damage or degradation from copper, Elastocon® 8150B TPE can be injection molded, extruded, or blow molded and provides high-flow properties for thin parts molding. It is available in 50 Shore A hardness and supplied as concentrates for compounding or as ready-to-use pellets. Areas of use include automotive/industrial applications where product can be directly overmolded onto copper or where material might come into direct contact with residual copper dust.

AMS Technologies AG    Munich 82152  Germany
Aug 07, 2009 Suited for wind power, traction, and industry applications, Customized Water Coolers are available for 62 mm IGBT modules, SKiiP, Primepack, 130 x 140 and 140 x 190 mm modules. Units are also available for disc cell diameters up to 115 mm and clamping force up to 150 kN, targeting medium voltage applications in press pack stacks. Available with meander-like channels, pin fins, or channels in counter flow, coolers utilize friction stir weld for contamination-free seal.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Aug 07, 2009 Designed to fit standard 3U cPCI or VPX 0.8 in. pitch, 55MQ2 provides 150 W of output power - +5, +3.3, and ±12 Vdc - at full load over -55 to +85°C operating range. Conduction-cooled solution, suited for military airborne, shipboard, and ground applications, exhibits typical efficiency of 80%. Compatible with Power Management Bus, single-slot product provides current share capability to implement increased power output or for load sharing of 2 or more units.

AMS Technologies AG    Munich 82152  Germany
Aug 07, 2009 Able to communicate via SPI, RS232, or RS485 interface, ORION(TM) module provides accelerated frequency tuning functionality or direct amplitude modulation functionality in one package. End users can directly modulate frequency with bandwidth of 0-10 kHz, via unit's 9-pin D-sub connector, over specified case temperature of 0 to +70°C. Alternatively, module can be used in direct power modulation mode. GUI further facilitates integration into fiber optic sensing systems.

AMS Technologies AG    Munich 82152  Germany
Aug 07, 2009 Available in 1.25 and 2.5 mm versions, pen type Neoclean-E cleans end-faces of fiber connectors and in-adapter ferrules. Microfiber tissue removes all contaminants and secures them, while antistatic property prevents static load that could bring new contamination after cleaning. Equipped with replaceable cartridge, Neoclean-E can be reused, avoiding disposal of tool when thread is due to be changed. Over 750 ferrule cleaning cycles per cartridge are possible.

Rofin-Baasel Inc.    Boxborough, MA 01719
Aug 07, 2009 FL Series can be used to weld small parts with low thermal distortion and minimal heat affected zones. Beam quality can be coupled with fiber optics 50-600 µm in diameter, equivalent to beam quality of 2.5-30 mm x mrad. Additionally, model FL 010 S offers option of fiber laser solution with single mode beam quality of 0.4 mm x mrad (typ) and 1,000 W output power. Optional beam switch and energy share modules enable one laser to be used in up to 4 individual work cells.

Del City    Menomonee Falls, WI 53051
Aug 07, 2009 Available in panel or surface mount, Hi-Amp Circuit Breakers feature manual ON/OFF function, combining manual reset thermal circuit breaker and electrical disconnect switch. Each unit is rated up to 48 Vdc with 3,000 cycles and is available in variety of amperages from 60-150 A. Compliant with ABYC E-11 and CE SAE J1171 for Ignition Protection, IP66-rated units operate from -40 to 185°F.

DEK    Rolling Meadows, IL 60006
Aug 07, 2009 Designed to handle delicate wafer products, Galaxy Thin Wafer System uses wafer pallet to secure wafers as thin as 75 µm during transport and processing. Approximately 400 mm square, wafer pallet is flat to less than 10 µm and can accommodate wafers as large as 300 mm. System's DirEKt Coat(TM) process for deposition of 25 µm thick die attach adhesives and other coatings boasts process capability of Cp greater than 2 at ±12.5 µm and TTV as low as 7 µm on 150 µm thin wafers as large as 200 mm dia.

OPEN Mind Technologies USA, Inc.    Wellesley Hills, MA 02481
Aug 07, 2009 Integrating into wide range of CAD systems, hyperMILL v2009.1 enables users to program 2D, 3D, HSC, 5-axis, and mill-turn strategies using single interface. In addition to extensive standard functions, software includes applications for multi-blade machining, single-blade machining, porting of cylinder heads, and tire molds. Feature and macro technology accelerate NC programming, while fully automated collision checking and avoidance provide process reliability.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
Aug 07, 2009 PowerMILL CAM v10 incorporates background-processing and multi-threading technologies, using full power of hardware to reduce calculation times and increase output. Optimized memory usage also lends to productivity when programming large and complex parts, while ordering capabilities accelerate cycle times on machine tool. Delivering accelerated toolpath generation on multi-processor computers, solution lets users prepare data in foreground while calculating toolpaths in background.

InduKey North America    Mechanicsburg, PA 17055
Aug 07, 2009 InduDur(TM) combines lightweight, carbon-fiber front panel with non-removable, stainless steel keycaps and optional 38 mm, epoxy resin trackball. Available in compact web design or with trackball for Internet terminals, IP65-rated data input system is intended for public access applications such as service terminals, kiosks, vending machines, and point-of-information consoles. Carbon material is offered in mat carbon black, high-gloss carbon silver, and high-gloss carbon black finishes.

Danaher Motion/Portescap    Radford, VA 24141
Aug 07, 2009 Able to deliver 0.05 Nm continuous torque within overall envelope of 8 mm, R08 gearhead can be coupled with brush dc, brushless, and stepper motors. Standard gearbox is available from 4-256 ratios, which can be further extended to 4,096, and metallic tube minimizes noise while increasing robustness and torque output. Featuring monobloc shaft, gearhead delivers up to 10 N radial load carrying capacity and can be customized to meet application requirements.