Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Model MAX7036 superheterodyne receiver integrates self-contained PLL block; 400 kHz IF filter with RSSI; and analog baseband, data-recovery circuitry. Operating over -40 to +105°C temperature range from 3.3 or 5 V power supply, it offers sensitivity of 109 dBm and draws less than 1 µA in shutdown mode and 5.5 mA in receive mode. Power-down pin puts unit in low-current sleep mode and automatic gain control circuit reduces LNA gain by 30 dB when input signal power is large.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Housed in 38-pin TSSOP package, 4-channel 24-bit MAX11040 provides compensation for phase shift caused by resistor dividers, transformers, or filters at analog inputs through programmable delay of 0-333 µsec. Eight units can be daisy-chained to provide sampling capacity of up to 32 channels. With minimum SINAD of 90 dB and SFDR of 91 dB, ADC is suited for power-grid-protection equipment, as well as other applications that require conversions of simultaneously sampled channels between 0.25-64 kS/sec.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Operating from 6-38 V supply, MAX9943 (single) and MAX9944 (dual) op amps consume 550 µA quiescent current per amplifier. They have 100 µV max input-offset voltage as well as 0.4 µV/°C offset drift and offer gain-bandwidth product of 2.4 MHz. Featuring 15 nV/SqrRtHz input-voltage noise density and 1 fA/SqrRtHz input-current noise density, MAX9945 operates from 4.75-38 V supply, consumes 400 µA quiescent current, and has gain-bandwidth product of 3 MHz.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 10, 2009 Model ADuM4160 utilizes iCoupler® digital isolation technology to offer 5 kV rms medical-grade isolation, upstream short-circuit protection, and isolated 1.5 and 12 Mbps data rates. Combining high-speed CMOS and microtransformer technology, USB 2.0-compliant chip operates off 5 V USB supply or 3.3 V power using internal regulator. It provides isolated control of pull-up resistor, allowing peripheral to control connection timing. Also, 2 mA idle current eliminates need for suspend state.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Designed using monolithic SiGe BiCMOS process, 2.0-3.9 GHz MAX19996A provides fully integrated downconversion channel, with +24.5 dBm IIP3, 8.7 dB conversion gain, and 9.8 dB typical noise figure. Unit features 2LO-2RF spurious rejection of 67 dBc for RF level of -10 dBm, and 62 dBc for level of -5 dBm. Housed in 5 x 5 mm, 20-pin TQFN package, device supports both high- and low-side LO injection architectures for 2.3-2.9 GHz WCS, LTE, WiMAX(TM), and MMDS base stations.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 When configured as downconverter, Model MAX2051 provides 35 dBm of IIP3, 24 dBm of IP1 dB, 7.4 dB of conversion loss, and 7.8 dB noise figure. SiGe passive mixer exhibits 2 x 1, 2 x 2, and 3 x 3 spurious suppression, with typical values of 88, 79, and 101 dBc, respectively, over entire 50-1,000 MHz IF band. As upconverter, MAX2051 delivers 33.4 dBm of IIP3, conversion loss of 7.5 dB, and better than 61 dBc of LO ±2IF and 78 dBc of LO ±3IF suppression.

Future Facilities Inc    San Jose, CA 95110
Aug 10, 2009 6SigmaET enables building of models entirely from intelligent objects, which accelerates model creation, enables automatic gridding, and simplifies post-processing. In addition to multi-grid solver technology, software utilizes intelligence contained in every aspect of model to enable automatic meshing. Solution also solves conduction equations required to accurately simulate rotated or angled geometry.

Cyber-Tech, Inc.    Portland, OR 97281
Aug 10, 2009 Offered with choice of standard, sealed, or proportional switch functions, EG-930 Pro Series Ergo-Grip® comes in ergonomic, die cast aluminum housing that is unaffected by chemicals or UV rays. Proportional Pro-Switch, included, uses Hall-effect technology in environmentally sealed enclosure and provides smooth linear output of 0.5-4.5 Vdc for precise control. Up to 4 switch functions are available in right- or left-hand configurations.

Kalamazoo Machine Tool, Inc.    Portage, MI 49002
Aug 10, 2009 Model C320SA, designed for semiautomatic operation, is suitable for production sawing of tubes, profiles, and small solids. It features 17 and 34 rpm spindle speeds while accepting blades with up to 12½ in. dia. Offering simplified controls, it incorporates powered vise and downfeed control. Device includes heavy-duty precision-ground saw bed, TEFC 3-phase 2½ hp drive motor, enclosed transmission, and removable full-blade guarding.

Kalamazoo Machine Tool, Inc.    Portage, MI 49002
Aug 10, 2009 Model CT 350 A-NC is fully automatic high-speed circular saw suitable for use on aluminum extrusions, small aluminum solids, and other nonferrous materials. Utilizing 14 in. carbide-tipped sawblade and spray mist coolant, it can yield 50 rms quality cuts at 90°, or 45° left and right, with accuracy of ±0.005 in. Saw features twin pneumatic vises with infinitely variable clamping pressure and programmable control with digital entry for lengths and storage of up to 99 jobs.

Kalamazoo Machine Tool, Inc.    Portage, MI 49002
Aug 10, 2009 Offering full-cycle semi-automatic operation, model H310SA incorporates sawframe which automatically senses vise clamps and material size, lowers to cut at preset rate, and automatically returns to clear workpiece after cut. Unit provides vibration-free cutting and includes 12½ in. vise opening, 10 in. capacity, infinitely variable blade speeds from 60-360 fpm, and double mitering 45° left and 60° right. Also, it features TEFC 3-phase 2 hp drive motor and worm gear transmission.

Worksaver Inc.    Litchfield, IL 62056
Aug 10, 2009 Designed for SBS-27108A skid steers and SBFL-2780A front loaders, 9 ft Worksaver® Snow Blades provide snow removal in driveways, parking lots, or other large areas. Reinforced 27 in. moldboard with 3/8 x 6 in. cutting edge of 1044 steel fully angles right or left. Other standard features include extension trip springs for controlled break over in snow, and adjustable depth skid shoes that rotate for maximum wear.

Electro Standards Laboratories    Cranston, RI 02921 3403
Aug 10, 2009 Allowing users to access any one of eight separate fiber optic networks by simply pushing button on front panel, QuickSwitch Model 4193 eliminates plugging and unplugging fiber optic patchcords, and minimizes connector wear. Unit insures isolation between networks/devices. Common port converts selected fiber optic network port to 100BaseTX interface, and all 8 network ports are 1,300 nm 100 Mbps ST duplex multimode fiber with SC duplex available.

Electronic Assembly Manufacturing, Inc    Methuen, MA 01844
Aug 10, 2009 Measured performance for 0.600-in.-diameter, LMR® cable assemblies offer VSWR below 1.15:1 for frequency range through 6 GHz. They offer power handling capability through 6 GHz, and are available with outside dia ranging from 0.100-0.600 in. Units have insertion loss of 11 dB/100 ft at 6 GHz for cable assembly with 0.405 in. outer dia. Assemblies have inductance of 50 W, and can terminated with coaxial connectors, including Type N, TNC, UHF, and 7/16.

Meyda Tiffany    Yorkville, NY 13495
Aug 10, 2009 Reproduced from antique Transitional Craftsman design, 14 in. wide Borough Hall Pendant (109137) is handcrafted with 12 panels of kiln-bent Revival White art glass and Craftsman Brown finished brass. It includes 5 in. wide ceiling canopy and 6 ft foot chain. Borough Hall collection is suited for large residential, commercial, and institutional applications.

Spiroflow Systems, Inc.    Monroe, NC 28110
Aug 10, 2009 Capable of vacuum conveying of up to 6,000 lb/hr of material at distances up to 300 ft, PNEUVAC® vacuum conveying system suits rapid discharging of material from road or rail tankers into silos or transfer of product from bulk bags, hoppers or silos to production processes. Product offers dust-free operation as it is conveyed under vacuum within conveying line and any leakage is into conveyor. It is designed to meet sanitary standards, and provides hygienic transfer of materials.

Exact Metrology, Inc    Algonquin, IL 60102
Aug 10, 2009 Equipped with wide-field-of-view 3D and mega-pixel 2D sensors, Artec3D scanners capture both shape and surface texture of objects in snap-shot or video mode. They capture images at speeds of up to 15 surfaces/sec and have measuring speed of up to 1.5 mil points/sec. User can scan image by simply walking around object and scanning it from various angles, while accompanying software combines all scanned images into one.

Actel Corp.    Mountain View, CA 94043 4655
Aug 10, 2009 Featuring SmartPower tool with design analysis algorithm, Libero Integrated Design Environment v8.6 provides accurate method for performing power analysis without having to utilize Value Change Dump file. I/O Advisor identifies and suggests I/O configuration that provides least power consumption while meeting timing constraints. With post-layout probe insertion feature, designers can bring signals out to package pins for observation without needing to instrument within design RTL.

Danube Technologies, Inc.,    Portland, OR 97204
Aug 10, 2009 Designed to reinforce principles of Scrum framework, ScrumWorks Pro v4 lets users coordinate multiple related development groups with cross-cutting releases and feature goals. Large groups organized to meet complex development needs have flexible system to model features and milestones across multiple development groups. Other features include one interface for tracking through to completion with roll-ups of progress, feature decomposition with epics, and release planner view.

Kyocera Mita America Inc.    Fairfield, NJ 07004
Aug 10, 2009 KYOcapture v5.0 is server-based middleware allows organizations to capture, process, and route paper/electronic documents from MFPs to any document management system. Powered by AutoStore, it serves as gateway for documents to be stored, shared, searched, or retrieved throughout network. Program offers customizable user interface and bidirectional searching to retrieve data and browse network folders. Secure SSL encryption and user authentication are included.