Genesis Enterprises, LLC    Allen, NE 68710
Aug 11, 2009 Suited for pickups, SUVs, and vans, Receiver Hitch Canopy can be set up in minutes by 1 person standing on ground. Frame is manufactured of 17 gauge galvanized 1 3/8 in. tubing and top is rip stop polyethylene complete with grommets and ball bungee tie-downs. With compact design that breaks down and stores in minimal space, canopy is appropriate for outdoor vending stands and job site applications.

Eriez Magnetics    Erie, PA 16506
Aug 11, 2009 Featuring completely enclosed magnetic circuit that withstands severe usage, Hi-Powr Permanent Magnetic Sheet Fanners are suited for semi-sticky, oily, bent, and heavy gauge sheets. Three strengths and 4 functional heights provide complete coverage for up to 1/8 in. thick steel sheets stacked up to 14 in. high. Equipped with hand cutouts for transporting, fanners have stainless steel U-shaped frame with stainless anti-friction strips and back cover.

Laird Technologies    Chesterfield, MO 63017
Aug 11, 2009 Suited for outdoor use and for harsh environments, HD RooTenna(TM) series covers industry-standard 902-928 MHz and 865-868 MHz RFID frequencies, as well as wide band version for 865-960 MHz. Series offers 6 different circularly-polarized UHF antenna options that are available in choice of right-hand (RH) and left-hand (LH) circular polarization. Available in die-cast enclosure that can be pole or wall mounted, series integrates RFID antenna and compartment for reader electronics.

Ophir-Spiricon Inc.    Logan, UT 84321
Aug 10, 2009 Featuring 12 mm numerical aperture and fused silica window in front of detector, Model 3A-P-FS measures very low power, pulsed or CW lasers in 0.19-20 µm wavelength range. Window, located 7 mm from sensor surface, keeps out air currents and long wavelength background heat. Designed to work with all Ophir smart displays or PC interfaces, sensor can measure divergent beams up to ±40°, optical power from 60 µW to 3 W, and energy from 20 µJ to 2 J.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 Designed for welding wide variety of materials and applications, Power Wave® S350 features PowerConnect(TM) Technology, allowing users to connect automatically to input power ranging from 200-600 V, 50 or 60 Hz and single- or 3-phase with no manual reconnect. IP23-rated unit includes Tribid(TM) Power module, iARC(TM) digital controls for arc stability, and Ethernet connection. Production Monitoring(TM) software lets user track equipment usage, store weld data, and configure limits.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 Used for MIG, pulsed MIG, and flux-cored welding processes, Magnum® PRO 450/550 are rated for 100% duty cycle and designed/tested for extreme environment welding applications. Balanced, barrel-style handle provides comfortable grip and reduces fatigue, while industrial-grade construction with copper and aircraft-grade aluminum parts ensures optimal electrical contact and heat dissipation. Also, Copper Plus(TM) contact tips maximize diameter and tip volume by weight.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 Designed for continuous operation, Mobiflex® 100-NF is suited for construction or shop welding applications where removing welding fume from source is needed without filtration. Portable, low-vacuum system can adapt to various work locations and welding applications, including stick, TIG, MIG, and flux-cored. Components include 16 ft house/hood set and 16 ft exhaust hose set, which can also be used to extend hose/hood set to full length of 32 ft.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 Available in 2 bulk sizes (500 and 1,000 lb), Accu-Pak® Boxes for SuperArc® MIG wire are designed to meet needs of robotic welding applications with bulk quantities, mini pallets, and side view windows. These 100% recyclable products, which can be stacked up to 2 high, are optimized for portability due to forklift-ready, corrugated cardboard mini-pallets on 500 lb box and wooden mini-pallets on 1,000 lb.

National Instruments Corp.    Austin, TX 78759-3504
Aug 10, 2009 Intended for control, test, and embedded system development, LabVIEW 2009 addresses challenges of parallel hardware architectures through virtualization technology that utilizes multicore systems as well as compiler and IP that enhance FPGA design. In addition to simplifying real-time math, software makes it possible to deploy code to wireless sensor networks to build smart industrial measurement and monitoring systems and features solutions for testing multiple wireless standards.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 With low fume generation rates, UltraCore® 70C Gas Shielded Flux-Cored Wire optimizes cleanliness and visibility while welding. Diffusible hydrogen levels are controlled at H8 AWS classification to provide resistance to hydrogen induced cracking. Optimized bead stacking and slag removal minimize clean-up time for multi-pass welding. Wire meets requirements of structural fabrication, heavy equipment, and ship building industries.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 Designed to meet requirements of heavy equipment, structural fabrication, and mining industries, gas-shielded UltraCore® 75C provides optimized stackability for welding thick steel sections. Basic slag system offers resistance to hydrogen induced cracking in many applications, including difficult-to-weld materials and restrained joints. Charpy V-notch test results are capable of exceeding AWS E70T-5C-JH4 impact requirements of 20 lbf-ft at -40°F.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Aug 10, 2009 For fabrication shops dealing with small- to medium-sized parts, eCell(TM) LR provides flexible automation layout that delivers consistent and predictable production. Power Wave® i400 welding power source and AutoDrive(TM) 4R90 welding wire drive are employed for MIG, synergic MIG and MIG pulse welding, or flux-cored arc welding. Supplied as pre-engineered system, cell has 80 x 50 in. footprint and takes advantage of reach/stroke ratio and axis speeds of Fanuc ARC Mate® 50iC/5L robot arm.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Built around 54 MHz, 10-bit ADC, Model MAX9526 provides 4x oversampling while consuming 200 mW during normal operation and 100 µW in shutdown mode. Supply voltage range of 1.7-3.5 on digital I/O eliminates need for external level shifters when interfacing with video processor. Power-over-Ethernet allows use of existing Cat-5 wiring for both data transmission and power. Designed to power up in fully operational mode, unit automatically configures itself to decode NTSC or PAL input standard.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Supplied in 4 x 4 mm, 28-pin TQFN package, MAX8903A DC-DC charger employs 4 MHz (typ) switching frequency to minimize heat and charge time. All power switches and current-sense circuitry required for charging and switching load between battery and external power are included, along with Smart Power Selector(TM) circuitry. Charger can operate with separate inputs for USB and AC-adapter power or from single input that accepts both. Charge current is adjustable up to 2 A.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Model MAX7036 superheterodyne receiver integrates self-contained PLL block; 400 kHz IF filter with RSSI; and analog baseband, data-recovery circuitry. Operating over -40 to +105°C temperature range from 3.3 or 5 V power supply, it offers sensitivity of 109 dBm and draws less than 1 µA in shutdown mode and 5.5 mA in receive mode. Power-down pin puts unit in low-current sleep mode and automatic gain control circuit reduces LNA gain by 30 dB when input signal power is large.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Housed in 38-pin TSSOP package, 4-channel 24-bit MAX11040 provides compensation for phase shift caused by resistor dividers, transformers, or filters at analog inputs through programmable delay of 0-333 µsec. Eight units can be daisy-chained to provide sampling capacity of up to 32 channels. With minimum SINAD of 90 dB and SFDR of 91 dB, ADC is suited for power-grid-protection equipment, as well as other applications that require conversions of simultaneously sampled channels between 0.25-64 kS/sec.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Operating from 6-38 V supply, MAX9943 (single) and MAX9944 (dual) op amps consume 550 µA quiescent current per amplifier. They have 100 µV max input-offset voltage as well as 0.4 µV/°C offset drift and offer gain-bandwidth product of 2.4 MHz. Featuring 15 nV/SqrRtHz input-voltage noise density and 1 fA/SqrRtHz input-current noise density, MAX9945 operates from 4.75-38 V supply, consumes 400 µA quiescent current, and has gain-bandwidth product of 3 MHz.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 10, 2009 Model ADuM4160 utilizes iCoupler® digital isolation technology to offer 5 kV rms medical-grade isolation, upstream short-circuit protection, and isolated 1.5 and 12 Mbps data rates. Combining high-speed CMOS and microtransformer technology, USB 2.0-compliant chip operates off 5 V USB supply or 3.3 V power using internal regulator. It provides isolated control of pull-up resistor, allowing peripheral to control connection timing. Also, 2 mA idle current eliminates need for suspend state.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 Designed using monolithic SiGe BiCMOS process, 2.0-3.9 GHz MAX19996A provides fully integrated downconversion channel, with +24.5 dBm IIP3, 8.7 dB conversion gain, and 9.8 dB typical noise figure. Unit features 2LO-2RF spurious rejection of 67 dBc for RF level of -10 dBm, and 62 dBc for level of -5 dBm. Housed in 5 x 5 mm, 20-pin TQFN package, device supports both high- and low-side LO injection architectures for 2.3-2.9 GHz WCS, LTE, WiMAX(TM), and MMDS base stations.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 10, 2009 When configured as downconverter, Model MAX2051 provides 35 dBm of IIP3, 24 dBm of IP1 dB, 7.4 dB of conversion loss, and 7.8 dB noise figure. SiGe passive mixer exhibits 2 x 1, 2 x 2, and 3 x 3 spurious suppression, with typical values of 88, 79, and 101 dBc, respectively, over entire 50-1,000 MHz IF band. As upconverter, MAX2051 delivers 33.4 dBm of IIP3, conversion loss of 7.5 dB, and better than 61 dBc of LO ±2IF and 78 dBc of LO ±3IF suppression.