Aimtec, Inc.    Dollard Des Ormeaux, QC H9G3B9  Canada
Oct 20, 2009 Rated at up to 89% efficiency, AM15C-Z and AM15CW-Z provide power density of 37.5 W/in.³ from 1 x 1 in. package. AM15C-Z series features 2:1 input voltages ranges of 9-18, 18-36, and 36-75 V, while AM15CW-Z series offers 4:1 input voltage ranges of 9-36 and 18-75 V. Both series have regulated and protected single and dual output voltages of 3.3, 5, 12, and 15 Vdc precisely controlled via tight load regulation of ±0.5% (single output) or ±1% (dual output).

Sunrise Telecom Inc.    San Jose, CA 95119
Oct 20, 2009 Combining sweep, triple play service, and cable modem analysis, CM2800 lets field technicians monitor and diagnose issues/impairments on upstream and downstream channels to ensure no critical voice, data, or video service disruptions occur. True non-interfering downstream sweep ensures network is operating at required levels and frequency responses, while 5-200 MHz upstream sweep lets one person test full frequency span of return lasers with one instrument.

LEM U.S.A., Inc.    Milwaukee, WI 53224
Oct 20, 2009 Based on Perfect Loop Technology, 5 mm gauge split-core RT Series offers sensing aperture diameters of 55 or 125 mm and achieves absolute accuracy of better than 0.65% after calibration. Magnetic coupling technology allows optimal extension of magnetic flux at loop opening, which compensates for coil asymmetry. Electronic integrator circuit, typically within device to which sensor is connected, converts voltage signal into output signal that is proportional to primary current.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Oct 20, 2009 Based on rotary knife mill in which blades are mounted on solid steel rotor and stationary bed, Models 200 and DS-200 destroy paper, CDs and DVDs, key tape, floppy disks, audio cassettes, ID badges, and credit cards. Dual-stage DS-200 has built-in shredder that can accept 14 sheets of paper with no need to remove staples or paper clips. Measuring 59 x 51 x 25 in., both include 2 x 9 in. feed opening, waste-evacuation/dust-collection system, and 100 35-gal waste collection bags.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Oct 20, 2009 Suited for light- to medium-duty aluminum fabrication and repair work, Spoolmate(TM) 200 features handle-based wire feed speed adjustment and 20 ft power cable. Unit offers curved and extended barrel options as well as internal shielding gas line, optimizing ability to access tight joint configurations. Rated to 160 A at 60% duty cycle, Spoolmate 200 accepts .030 and .035 in. wire and plugs directly into Millermatic® 212 w/Auto-Set(TM) and Millermatic® 252.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Oct 20, 2009 Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures match with target PCB's CTE and prevents failures that may occur with CTE mismatch.

ON Semiconductor, LLC    Phoenix, AZ 85008
Oct 20, 2009 Featuring 256 resistor taps and I2C interface, dual-channel Models CAT5270 and CAT5271 are suited for variable resistance adjustment applications. DPP(TM) ICs offer volatile wiper register for applications using MCU with on-chip memory for wiper recall, or for systems that do not require memory. Available with end-to-end resistance options of 50 and 100 kW, CAT5270 allows microprocessor control of up to 16 devices from single bus, while CAT5271 offers single, fixed address.

Samtec, Inc.    New Albany, IN 47151 1147
Oct 20, 2009 Featuring 5 mm body and .8 mm pitch, Q Rate® System (QRM8/QRF8 Series) controlled impedance interconnects employ Edge Rate(TM) contact system. Contacts, combined with integral metal power/ground plane rated to 8.9 A, promote optimal electrical performance, while 1.2 mm contact wipe distance improves allowable angle during mating/unmating. Performance rating is 9.5 GHz SE and 8.5 GHz DP at 7 mm stack height and -3 dB insertion loss.

STMicroelectronics    Lexington, MA 02421
Oct 20, 2009 Featuring digital output, 3-axis Model LIS331HH offers full scale ranges of ±6/±12/±24 g. Medium-g sensing enables high-level vibration monitoring and high-shock detection without loss of information. Two separate programmable interrupt signals enable immediate notification of desired events, such as when acceleration value goes above/below user-defined threshold. Housed in 3 x 3 x 1 mm³ package, sensor can be programmed to work in sleep-to-wake-up mode to minimize power consumption.

That Corp.    Milford, MA 01757
Oct 20, 2009 Comprising low-noise differential audio preamplifier and digital preamplifier controller, THAT1570/5171 Chipset features 130 dB dynamic range when operating from ±17 V supplies. Gain can be programmed over 56 1-dB steps from 13.6-68.6 dB. Servo minimizes dc offset, while zero crossing detector minimizes gain-switching noise. Housed in 4 x 4 mm QFN16 package, device features low noise of 1.5 nV/√Hz at 68.6 dB gain, THD+N of 0.0003% at 21.6 dB gain, and 1.8 MHz bandwidth at 40.6 dB gain.

Mate Precision Tooling    Anoka, MN 55303
Oct 20, 2009 Designed for machines without bottom stroke forming feature, EasyMark(TM) 5-In-1 Tooling Kit can be used 5 different ways for marking and scribing part surfaces. Using CNC punch press, thick turret application tooling system can write numbers, dates, and other identifying information on part surface; etch sheet metal with permanent marking information; cut or scribe protective film on sheet metal surfaces; create cone-shaped indentations on part surface; and perform high-speed dot matrix marking.

HEM Data Corp.    Southfield, MI 48076 2106
Oct 20, 2009 Used for in-vehicle diagnostics, DAWN(TM) Mini Logger fits within mating J1962 connector under dashboard. Stand-alone device supports leading automotive protocols, such as CAN and J1939, to acquire on-board diagnostics (OBD) and enhanced diagnostic data. Able to connecto to PC via various interfaces for data analysis and display, logger can acquire parameters from multiple controllers simultaneously. Using special test mode, data is acquired up to 250 samples/sec for each parameter.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Oct 20, 2009 With degree of automation that accelerates programming, FeatureCAM 2010 delivers functionality from 2D drilling and wire EDM to 5-axis milling and mill-turn operations. Support for multi-threading when generating 3D toolpaths allows calculations to be spread across multiple cores in dual- and quad-core computers. Combined drilling and milling functionality, spiral finishing option, tool-axis smoothing, and automatic rest roughing are also included.

Fredericks Company, The    Huntingdon Valley, PA 19006-6232
Oct 20, 2009 Available in +10° high gain, +25° standard, and +50° wide angle versions, IRIS Tilt Controller enables measurement and command of tilt movement in any direction with reference to unchanging gravity vector. Unit detects angular position using onboard electrolytic tilt sensor with no mechanical moving parts to break or wear out. IRIS can be used to adjust solar panel angles to achieve maximum light intensity and power levels and to detect misaligned panels.

Wolfson Microelectronics plc    Edinburgh EH11 2QB  United Kingdom
Oct 20, 2009 Targeted at portable applications such as digital still cameras, digital camcorders, and voice recorders, mono Models WM8944 and WM8945 and stereo Models WM8946 and WM8948 integrate speaker, video and microphone amplifiers, and LDO regulator. Models WM8945 and WM8948 also include touch panel controller. Housed in 36-ball W-CSP package, all include dynamic range control, stereo-widening algorithm, 5 notch filters, 5-band programmable equalizer, and programmable wind noise filter.

Daimer Industries Inc    Woburn, MA 01801
Oct 20, 2009 Featuring ATIS® Advanced Thermal Ionic Sanitization(TM), KleenJet® Ultra 1000CVP Machines kill 99.99% of mold and dangerous bacteria. Units have overall water capacity of 7 l and 5 l extraction chamber for extended continuous cleaning. Included wet-dry vacuum provides 2,200 mm of column lift and comes with water and HEPA filtration to remove allergens. Supplied with variety of tools and attachments, cleaners produce pressure levels up to 89 psi and steam temperatures up to 320°F.

Powerex, Inc.    Youngwood, PA 15697
Oct 20, 2009 Model QJD1210006, with 50 A Schottky free wheeling diode, and QJD1210007, with 100 A diode, are rated 1,200 V and offer total power-loss reduction of 54% when operated at 20 kHz. Constructed in half-bridge configuration, units feature 100 A of silicon carbide MOSFET/switch with 2 switches/model. All components and interconnects are isolated from heat sinking baseplate, simplifying system assembly and thermal management. Products feature junction temperatures from -40 to +200°C.

Asymtek    Carlsbad, CA 92008
Oct 20, 2009 Configurable for inline or same-side load and unload operations, MH-900 Series supports both single and dual-lane conveyors and handles variety of parts from very thin strips to large boats and carriers. Programmable transport speed and carrier staging maximize units/hr while multiple carrier sensors, active pinch wheels, and thin strip guides ensure safe handling. Elevator and shuttle operate independently with programmable speed to provide precise, high-speed movement.

Sandvik Materials Technology, Strip Products Div.    Benton Harbor, MI 49022
Oct 20, 2009 Providing slickline optimization in oil and gas industry, Wraptor(TM) allows for safe, controlled wire test of up to 3 ft in length for 0.125 in. line and more for 0.108 in. line. With tester, users can make accurate predictions as to state of slickline and its optimum retirement point. Self-contained in carry case, Wraptor comes with chuck, bushing, wire guide for wrap tests, spindle and chuck for torsion tests, as well as pliers, Allen key, table fixtures, and operating handle.

All Metric Small Parts (aMsp)    New Hyde Park, NY 11040
Oct 20, 2009 Configurable for specific applications, MMAHOFM Series of control knobs can be specified with and without handles and 0-100 scales, as well as with or without handles and/or scales. They are available in diameters of 50, 60, and 70 mm.