Doosan Infracore American Corporation    Suwanee, GA 30024
May 14, 2012 Powered by 6-cylinder interim Tier 4 compliant diesel engine with gross power output of 365 hp, Model DA30 delivers 1,381 lb-ft gross torque at 1,300 rpm. Transmission offers 8 forward and 4 reverse speeds. Agile undercarriage, designed to ensure that all 6 wheels are in permanent contact with ground, means truck can operate on very rough and soft terrain. Articulation hinge is positioned behind turning ring to provide equal weight distribution to front wheels, even during maximum turning.

Safetek International, Inc.    Brooklyn, NY 11219
May 14, 2012 Intended for meat, poultry, produce, and frozen foods, Safetek Professional Food Service Film is based on polyethylene material that disintegrates in given time period and, when annihilated, burns to hydrogen and carbon with no residual polluting side effects. Cling film is 100% non-toxic, 100% recyclable, and conforms to food contact regulations.

Banner Engineering Corp.    Minneapolis, MN 55441
May 14, 2012 Supporting collision avoidance and vehicle detection, R-GAGE Series of radar-based sensors have capability to detect large objects in outdoor environments. Frequency Modulated Continuous Wave (FMCW) radar, unaffected by rain, snow, wind, fog, light, humidity, or temperature, promotes reliable detection and can also detects stationary objects that cannot be detected by Doppler radar. Distance capabilities minimize dead zones, and dual-zone signaling prevents damaging collisions.

Nameplates For Industry, Inc.    New Bedford, MA 02745
May 14, 2012 Custom-fabricated for medical devices and laboratory instruments or equipment, Front Panel Graphic Overlays feature digital printing with fine lines, full-color images, unlimited colors and color gradients, selective texturizing, embossing, precision cutouts, and colored windows. Overlays can be printed with up to 230 line screen and 1,200 dpi resolution on variety of substrates, and with adhesives engineered to meet OEM requirements for solvent resistance and weatherability.

Technology Container Corp.    Shrewsbury, MA 01545
May 14, 2012 Available in 12, 16, and 21 gallon sizes as well as under-bed styles, PackAways(TM) Corrugated Plastic Storage Boxes have self-locking bottom and top design that pops into place, eliminating need for tape and glue. Boxes are stackable, lie-flat when not being used, and can be reused hundreds of times. Unaffected by water and humidity, boxes have special end and side panels that can be written-on and wiped-off repeatedly.

Ohmite Mfg.    Rolling Meadows, IL 60008
May 14, 2012 C-series heatsinks feature camming clips that eliminate need for mounting holes and screws and provide same amount of force after repeated use. They are now offered in 30, 58, and 85 mm for TO-264 packages. Series is also offered in 25, 50, and 75 mm lengths for TO-220 and TO-247 devices, and TO-126 heatsinks are offred in 25 mm for single clip and 40 mm for 2 clips. Custom lengths and clip quantities are available.

Monroe PMP, a 3Sixty Group Co.    Auburn Hills, MI 48326
May 14, 2012 Available in swivel and rigid models and in top plate and stem mount versions, Industrial Casters offer range of options to handle loads from 75-1,500 lb. Units come in steel or stainless steel, with various finishes including nickel, zinc, black oxide, polished brass, and chrome. In addition, casters offer thermoplastic rubber, full pneumatic, polyurethane, cushion solid rubber, and cast iron wheel options with Delrin, plain, roller, or ball bearings.

KASO Plastics    Vancouver, WA 98682
May 14, 2012 Utilizing 3D printer (Fortus 250) to produce ABS prototype parts, rapid prototyping service can benefit from validation of new product design concepts prior to manufacturing. Resulting 3D prototypes can identify possible flaws early in prototyping process, saving time and investment for customers. ABS prototype parts can be created that exhibit as much as 80% strength of traditional plastic injection parts.

One-Cycle Control, Inc    Irvine, CA 92618
May 14, 2012 Measuring ~1.2 ft³, hardware-enabled 3-phase 50 A Model OCC-APF reduces harmonics to less than 5% and optimizes power factor to greater than 0.99 in real-time, eliminating problems caused by harmonic-pollution and freeing up capacity on facility transformer, protection equipment, and wiring. Suitable for wall or rack mounting, 40 kVA filter is scalable to higher power by sliding multiple units into 19 in. rack.

Curlin, Inc.    Tampa, FL 33619
May 14, 2012 Designed to move high volume of air while using minimal energy, Serco HVLS Fans feature patented blade system that creates large downwards flow of air in column that spreads out in all directions at floor level. In warm months, air circulation can create cooling effect, while in cool months, fans can operate in reverse, circulating hot air trapped at ceiling level. With iFan(TM) controls, up to 30 fans can be networked and controlled from central location.

Tecate Industries    Poway, CA 92064
May 11, 2012 Constructed in rectangular plastic cases with 5 mm lead spacing, TYPE 9245WT Series is available in voltages from 50-1,000 Vdc with capacitance values from 0.001-1 µF and extended temperature range up to 105°C. Dielectric strength is 1.6 Vr for 2 seconds, and dissipation factor is 1.0% max at 1 KHz at 25°C. Miniature, non-inductively wound devices are suitable for blocking, filtering, bypass, energy storage/discharge, and arc suppression in wireless and broadband telecom applications.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
May 11, 2012 FSRHDG is fully adjustable operator armchair system designed for machine and industrial cabin applications, as well as cab-operated equipment such as cranes, mining dredges and shovels. It houses mill duty master switches and joysticks, with full line of output devices including potentiometer, transformer, encoder and CAN Bus. Mechanical 4 step suspension employs fully hydraulic and spring dampened system with dial-in weight compensation and incremental height adjustment.

RF Industries    San Diego, CA 92126 4202
May 11, 2012 Suited for wireless carriers updating their networks to 4G technologies, WiMAX, LTE, etc., OptiFlex(TM) hybrid cabling solutions come in deployment lengths up to 550 ft with less than 10% voltage drop (based on radio power up to 950 W). Coax, multiple fiber, Ethernet, and power cables are bundled within rugged UV-, heat-, and moisture-resistant PVC outer jacket that can withstand harsh weather conditions or direct burial. Each custom, application-specific solution arrives pre-terminated.

McCrometer, Inc.    Hemet, CA 92545
May 11, 2012 Suited for gas or liquid service in line sizes from 1-6 in., Wafer-Cone® Flowmeter features flangeless design and plug-and-play mounting, eliminating potential source of flow measurement errors. Unit uses differential pressure sensing technology with built-in flow conditioning, achieving accuracy of +1.0%, with repeatability of +0.1%, and operation over flow range of 10:1. When flow conditions change over time, cone can be removed and replaced with cone at different beta ratio.

Dunham Tool Co. Div., Preferred Technologies, Inc.    New Fairfield, CT 06812
May 11, 2012 Bar Stock Pulling Bar Pull Systems include Inch sizes for use on CNC Lathes. Dunham Bar Pull metric sizes include Dunham 25 mm dia Bar Pull Shank that mounts into 25 mm Boring Tool Holder. Metric Dunham Bar Pull Grippers include grippers for bar stock sizes from 3-34 mm dia that will mount directly to Dunham Bar Pull Adapters or Bar Pull Shanks. Dunham Bar Pull Gripper inch sizes now include 1/16 in. increments from 1/8-2 in. dia as well as 1/8 in. increments from 2 1/8-3 in. dia.

FCI    Etters, PA 17319
May 11, 2012 With 0.4 mm pitch and 0.9 mm height, SFGL Series back flip-type actuator connectors are suited for use in tablet PCs. SFVL Series, available with 0.5 mm pitch and 0.7 mm height, provides secure mating in confined board spaces. Units meet accepted standards for Zero Insertion Force connectors used in backlight and touchscreen applications and are commonly used in smartphones and mobile phones.

Lowrance    Tulsa, OK 74128
May 11, 2012 Featuring waterproof chassis, Lowrance Link-5 is designed for Class D Digital Selective Calling operation. Fixed-mount, 25 W unit has microphone with 6 quick keys and built-in speaker, as well as rotary knob interface for channel changing, menu navigation, and setting control. Clear display of GPS lat/lon data is presented on 1 x 1.8 in LCD display with adjustable backlighting. Equipped with memory retention, radio logs up to 10 distress calls and 20 individual DSC calls.

CUI, Inc.    Beaverton, OR 97005
May 11, 2012 Provided with interchangeable blades for operation in North America, Europe, UK, and Australia, EMMA multi-blade adapter series includes 15 and 30 W configurations with output voltage options from 5-24 Vdc. ETMA desktop adapter series includes 30, 60, 110, 200, and 250 W configurations. Intended for medical and dental equipment manufacturers, both series meet Level V efficiencies and come with UL/cUL as well as TUV 60601-1 safety certifications.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 11, 2012 Electric-powered and crane-operated, ETL Powered Vacuum Lifter-Tilter requires 8 in. of head room and lets one person handle window assemblies for manufacturing, shipment, and installation. Unit features removable pendant control and can be equipped with suction vacuum pads configured to meet customer requirements. Offered in 250, 500, 1,000, and 2,000 lb capacities, lifter-tilter includes vacuum leakage sensor with audio-visual alarm that sounds upon vacuum loss.

Allegro MicroSystems Inc.    Worcester, MA 01615
May 11, 2012 Offered in 28-pin eTSSOP, A8601 fixed-frequency, multiple-output supply for LCD bias is Automotive Grade AEC Q-100 qualified and targets infotainment applications. Switching frequency can be programmed or synchronized with external clock signal from 350 KHz to 2.25 MHz to minimize interference with AM and FM radio bands, and up to 5 output voltages are provided from 3 linear regulators and 2 charge-pump regulators. Each output voltage can be adjusted independently.