Embarcadero Technologies    San Francisco, CA 94105
Oct 16, 2009 Combining process, data, and application modeling and reporting, ER/Studio® Enterprise v8.5 helps streamline model review process between developers and business users as well as automate communication of data lineage between systems. Users can also centralize process and data models as well as document software architecture. Feature set helps users understand, design, and communicate software, data, and enterprise architecture for improved traceability, collaboration, and reuse.

Qsan Technology, Inc    Taipei 114  Taiwan
Oct 16, 2009 With IOPS up to 210K and throughput up to 1,200 MBps, P500H offers redundant, active-active configuration for dual active protection, high-bandwidth cache mirroring, seamless management, multiple target nodes, and high-availability/load-balancing. This 10GbE controller supports SAS and SATA II interfaces at drive-side, while disk auto spindown and advanced cooling lend to power efficiency. Features include up to 32 multiple target iSCSI nodes and up to 128 sessions support.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Oct 16, 2009 Supplied in 14 x 14 mm QFP, TRF2443 low-noise intermediate frequency (IF) transceiver features cross-polarization interference cancellation support. Integration of 15+ functional blocks, along with output third order intercept point of 29.5 dBm and receiver noise figure of 4.3 dB, ensures linearity and sensitivity suited for wireless infrastructure backhaul and point-to-point microwave end equipment. Other features include programmable baseband low-pass filters and Tx/Rx synthesizers.

Rohde & Schwarz GmbH & Co      Germany
Oct 16, 2009 Used with ZVA Series vector network analyzers, ZVAX24 hardware extension facilitates intermodulation and pulse profile measurements. Depending on application, hardware can be equipped with combiners, harmonic filters, pulse modulators, and high power couplers. ZVAX24 is placed under vector network analyzer and RF ports are connected via semi-rigid coaxial cables. Control is performed via USB directly from analyzer, which displays dialog box containing block diagram of extension unit.

Danube Technologies, Inc.,    Portland, OR 97204
Oct 16, 2009 Designed exclusively to manage Scrum, enterprise-grade ScrumWorks Pro v4.1 lets users prioritize requirements at Epic level; set, establish, and track associated budgets; as well as improve APIs for broader integration. Epic prioritization is facilitated via same drag-and-drop functionality of standard user stories. For budgets, teams can establish resource guidelines, set milestones for each release, parameterize resource usage, and set automated threshold alerts.

SRA International, Inc.    Arlington, VA 22201
Oct 16, 2009 By providing historic, real-time, and predictive situational awareness of airspace and airport surface, Web-based AirScene.com® Symphony(sm) helps proactively manage airport operations, reduce delays, and improve performance during irregular operations (IROPS). Real-time 2D/3D displays show all aircraft and vehicles on airport surface and in terminal airspace. Other features include status messages and alerts, statistical reporting, and future prediction of infrastructure demand.

Atlona Technologies    San Jose, CA 95131
Oct 16, 2009 Providing 1 VGA input and 16 VGA outputs, Model AT-VGA116 is capable of splitting any signal from 1 VGA source to 16 separate displays with compatible VGA inputs simultaneously. Device allows cascading of up to 24 units to meet any AV application. With max bandwidth of 1 GHz, splitter will support highly defined video in multiple resolutions up to 2,048 x 2,048. Applications include store video displays, education and worship facilities, and digital signage.

Exar Corp.    Fremont, CA 94538
Oct 16, 2009 Optimized for 12 V input voltage rail, yet capable of operating from 5 and 24 V power rails, Model XRT7657 operates at fixed 420 kHz switching frequency and reaches up to 94% efficiency in Green SOIC package. Output voltage can be adjusted down to 0.8 V, with 2% accuracy, via 2 external resistors. Suited for A/V equipment, non-synchronous voltage mode converter features external type-III compensation as well as soft-start, current limit, and thermal shutdown protection.

Lighting Science Group Corp.    Dallas, TX 75201
Oct 16, 2009 Designed to replace existing high intensity discharge lighting installations, PROLIFIC(TM) Series includes 4 versions ranging from LSR1 at 50 W to LSR4 at 150 W. Units feature internal thermal management system that eliminates need for external fins. Incorporating custom arrayed optics and using recyclable, corrosion-resistant materials, luminaires are suitable for highways, city and residential streets, college campuses, parking facilities, and commercial projects.

RAE Systems    San Jose, CA 95134
Oct 16, 2009 Packaged in weather-resistant, stainless steel housing, AreaRAE Inert features built-in pump with ability to monitor inert atmosphere using up to 100 ft of sample draw tubing, allowing unit to remain outside of work area and in radio contact with breathing air services and safety managers. Detector may be equipped with up to 5 sensors as application or worksite demands. Wireless range is up to 2 miles and data can be re-transmitted over Internet for remote monitoring and evaluation.

STMicroelectronics    Lexington, MA 02421
Oct 16, 2009 Providing accurate measurements of vehicle movement for various internal systems, AIS226DS 2-axis, in-plane accelerometer senses acceleration up to ±6 g and can resolve angles of incline smaller than 0.02°. Motion is sensed using MEMS motion detector built on silicon chip, and integrated interface chip, available with SPI or I²C output, enables direct connection to vehicle's ECU. Sensor maintains ±70 mg accuracy throughout -40 to +105°C range, offering offset drift in 0.2 mg/°C range.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Oct 16, 2009 Suited for single-cell, Li-Ion battery-powered electronics, Series bq2404x and bq2405x have input voltage up to 30 V and 6.6 V overvoltage protection. Units feature USB current limiting and input voltage dynamic power management as well as 1% charge voltage accuracy and 10% current accuracy using single-output channel. Available in 2 x 2 mm or 2 x 3 mm SON package, chargers comply with JEITA guidelines. Series bq2405x has automatic input source detection of USB port or dedicated power adapter.

Trapeze Networks    Pleasanton, CA 94588
Oct 16, 2009 Able to survive harsh climates and industrial settings, MP-632 NonStop Wireless enterprise-class access point can create reliable, secure large areas of high-speed client access, bridges spanning many miles, or mesh networks enveloping large sites. IP67-rated solution, rated from -40 to +131°F, is dual-radio, dual-band (2.4 and 5 GHz), 3 x 3 MIMO access point that connects to network with Gigabit Ethernet and is managed by Mobility System Software.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 16, 2009 Designed for RF measurements, N9000A CXA signal analyzers perform remote sweep-and-transfer in less than 6 msec via LAN. Library of measurement applications includes preconfigured test routines for noise figure, phase noise, and analog demodulation. Other features included are ±0.5 dB absolute amplitude accuracy, +13 dBm third-order intermodulation, 161 dBm DANL, and 66 dB W-CDMA ACLR dynamic range.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 16, 2009 With up to 75 dB spurious-free dynamic range at 140 MHz analysis bandwidth, N9030A PXA signal analyzer provides frequency coverage up to 26.5 GHz. Specifications include 128 dBc/Hz phase noise at 10 kHz offset, 0.19 dB absolute amplitude accuracy, and sensitivity of -172 dBm DANL at 2 GHz (with preamplifier and Noise Floor Extension technology). Agilent 89600 vector signal analysis software can run inside instrument, providing advanced analysis of more than 70 demodulation formats.

MICRO-EPSILON AMERICA    Raleigh, NC 27617
Oct 16, 2009 Dependent on emissivity ratio but not on absolute emissivity, thermoMETER CT ratio provides measuring range of 700-1,800°C at maximum ambient temperature of 250°C. It enables connection to Profibus, Ethernet, USB, RS232, or RS485, and can be used as standard single-channel IR sensor or as ratio pyrometer. Operating with optical fiber between sensor and electronics, unit is unaffected by electromagnetic radiation.

Discovery Semiconductors Inc.    Ewing, NJ 08628
Oct 16, 2009 Operating in 1,310 Nm wavelength band, Quad Photoreceiver Arrays are designed for 10 and 40 km transmission over single-mode fiber conforming to 100 Gigabit Ethernet standard (100GBASE-LR4 and 100GBASE-ER4). Arrays consist of 4 monolithically integrated InGaAs photodiodes on InP substrate and 4 transimpedance amplifiers (TIAs) to produce 4-channel electrical output signal, each channel running up to 28 Gbps. Power consumption is typically 200 mW per channel.

Worktopia, Inc.    White Plains, NY 10605
Oct 16, 2009 Capable of accommodating both public and private networks of video conferencing studios, Universal Meeting Solution-Virtual Edition (UMS-VE) allows meeting planners to search, compare and book video conferencing in over 400 professionally appointed locations. Solution enables decision support and demand management capabilities based on live availability and pricing information. It helps in reserving room for up to 50 guests, in one real-time session.

Fujitsu Semiconductor Europe    Dreieich-Buchschlag D-63303  Germany
Oct 15, 2009 Optimized for modular automotive display systems, MB86R02 (Jade D) incorporates 32-bit ARM926EJ-S(TM) CPU core with Coral PA graphics processor. It is based on 90 nm CMOS process technology and optimized for applications requiring 2D/3D graphics. Along with 105°C rating, features include spread spectrum clock generation and dual APIX(TM) serial gigabit interface. Both links are configurable as transmitter or receiver and support sideband channel for peripheral data.

Maxim Integrated Products    Sunnyvale, CA 94086
Oct 15, 2009 MAX2839AS WiMAX(TM) MIMO RF transceiver includes two 2.3-2.7 GHz receivers that feature 2.3 dB noise, -81 dBm sensitivity for 64 QAM signal at 5 MHz channel bandwidth, and 95 dB gain control range digitally controlled in 1 dB steps. Transmitter has 62 dB gain control range controlled in 1 dB steps, 0 dBm linear output with 64-QAM signal, and greater than -45 dBc of sideband suppression. Contained in 3.5 x 5.1 mm package, product operates from 2.7-3.6 V supply.