Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Nov 18, 2009 PowerMax(TM) USB/RS sensors include signal processing and power measurement electronics inside USB 2.0 or RS-232 cable connector. Units connect directly to PC and include PowerMax PC applications software with virtual instrument interface, which enables operator to take laser power readings, log data, and compute measurement statistics. Suited for various applications, sensors provide accurate laser power measurement from deep UV to IR over µW to kW power range.

Lattice Semiconductor Corp.    Hillsboro, OR 97124
Nov 18, 2009 Allowing design of DDR interfaces for LatticeECP3(TM) FPGAs, ispLEVER® FPGA design tool Suite v8.0 features automatic interface code generation and timing analysis functions. Program includes GNU compiler v4.3.0, which allows flexible code deployment options; Tri-speed MAC IP that can be interconnected into high-throughput configurations; and SPI Flash Controller that allows read and write access. It supports Red Hat Enterprise Linux v5.3, Unix, and Windows.

Aitech Defense Systems Inc.    Chatsworth, CA 91311
Nov 18, 2009 Operating over continuous input voltage range of 18-36 Vdc, conduction-cooled, 3U Model P230 ensures optimal line and load regulation to protect embedded computing systems. Unit provides isolated voltage levels of +3.3, +5, +12, and -12 V at up to 10, 20, 9, and 1 A, respectively, or combined total power capacity output up to 150 W with efficiency better than 85%. Input power hold-up circuit provides 4 ms of output voltage hold-up time at full load.

Laird Technologies    Chesterfield, MO 63017
Nov 18, 2009 Extruded in various sizes and profiles, EMI Gemini(TM) Gaskets combine thin, electrically conductive filler elastomer gasket layer and inner, non-conductive silicone coated core gasket. Products provide EMI protection with minimized deflection while sealing against environmental influences such as moisture and dust. Gaskets are suited for military, medical, and commercial applications requiring application-specific shielding.

AVX Corp.    Myrtle Beach, SC 29578
Nov 18, 2009 Housed in 0402 case, 0.5 pF AntennaGuard SPV Series MLV provides 1 nS response time to ESD strikes and can withstand 100 successive strikes at 8 kV. Bi-directional transient voltage suppressor delivers 0.47 pF capacitance at 15 V rating, providing one-chip solution for protecting high-speed digital interface, HDMI, analog sensor, Flex Ray, GPS antenna, and RF amplifier circuit applications against ESD events.

AVX Corp.    Myrtle Beach, SC 29578
Nov 18, 2009 With working voltage range of 100-250 Vdc, SQCA Series exhibits stability under stresses of changing voltage, frequency, and temperature. Porcelain and ceramic dielectric material promotes reliability while minimizing ESR and resistance values. Featuring 100% tin terminations, RoHS-compliant product has 0605 case size and capacitance range of 0.1-100 pF. Uses include microwave RF/IF amp, low noise amp, mixer, oscillator, filter network, and MRI system applications.

Linear Technology Corp.    Milpitas, CA 95035
Nov 18, 2009 Operating with all N-channel MOSFETs from 4.5-38 V input voltages, Model LTC3855 produces output voltages from 0.6-12.5 V with ±0.75% accuracy. Dual output, synchronous step-down controller provides up to 95% efficiency. Up to 12 phases can be paralleled and clocked out of phase to minimize I/O filtering requirements for applications up to 200 A. Fixed operating frequency can be programmed from 250-770 kHz or can be synchronized to external clock with internal PLL.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Nov 18, 2009 Conserving board space by eliminating need for multiple connections, MC34825 Mini USB Interface IC helps create smaller consumer products by offering single mini USB connector for external accessories such as chargers, headsets, microphones, and audio/data connections. Analog IC also lowers power consumption and extends battery life by supporting all-passive audio accessories, and intelligent switching is used to automatically identify up to 32 different accessory types.

Lattice Semiconductor Corp.    Hillsboro, OR 97124
Nov 18, 2009 Integrating charge pumps with programmable current, Models ispPAC®-POWR1014-2 and ispPAC-POWR1014A-2 control MOSFETs in hot swap and sequencing applications. POWR1014-2 combines 24 macrocell PLD and dual precision voltage monitoring comparators with accuracy of 0.3%, while POWR1014A-2 also integrates 10-bit ADC for voltage measurements and I2C interface that enables microcontroller to read status of all comparators. Both operate across power supply voltages of 2.8-3.96 V.

Hobart Brothers Co.    Troy, OH 45373-2900
Nov 18, 2009 Usable with 75% Argon/25% CO2 or 98% Argon/2 % O2 shielding gas mixtures, Tri-Mark® Metalloy® 80N1 provides tensile strengths ranging from 85,900 to 90,000 psi, respectively. Wire is designed for both single- and multi-pass welding on 1/2 Ni-1/4 Mo, 1 Ni-1/4 MO, and 1-1/2 Ni-1/2 Mo steels. It can also be used for welding weathering steel applications where color match is not critical. Available in .045, .052, and 1/16 in. diameters, wire handles temperatures down to -50°F.

United Electronic Industries    Canton, MA 02021
Nov 18, 2009 Suitable for rotational position or motion applications, DNx-AI-255 boards are available for use with PowerDNA Cubes and for rack-mounting in PowerDNR RACKtangle or HalfRACK chassis. Each board has 2 fully isolated, synchro/resolver channels with independent ADCs, and each channel offers 16-bit resolution, ±2.6 arc-min accuracy, and scan rates to 4,000 Hz. On per channel basis, product can operate as synchro/resolver input interface or as simulation output device.

PAS    Houston, TX 77062
Nov 18, 2009 Integrity(TM) Automation Genome Software maps databases, programs, displays, and interconnections of all automation systems in plant. It identifies configuration defects and safety vulnerabilities, and retention and collaboration features capture implicit knowledge, contextualizes it, and makes it accessible, ensuring knowledge from experienced personnel is made available to everyone. Disaster Recovery module provides automatic backup and archiving of system and database files.

RGF Environmental Group Inc.    West Palm Beach, FL 33404
Nov 18, 2009 Models OWS 20 and OWS 50 coalescing oil separators run at 20 and 50 gpm, respectively and meet commercial and industrial requirements. High-efficiency oleophilic coalescing inclined honeycombed plates and RGF's micro-matrix oil coalesce are used together to ensure optimum oil removal. Devices are housed in steel-reinforced, molded polypropylene vessel with resistance to extreme climatic fluctuations and corrosion.

Linear Technology Corp.    Milpitas, CA 95035
Nov 18, 2009 Operating from 4.3-38 V input voltage, Model LT3971 features Burst Mode® operation, which keeps quiescent current under 2.8 µA in no load standby conditions. Internal 2.4 A switch can deliver up to 1.2 A of continuous output current to voltages as low as 1.19 V. Switching frequency is user programmable from 200 kHz to 2 MHz. Housed in 10-lead 3 x 3 mm DFN-10 package, step-down switching regulator is suited for automotive or industrial systems that demand always-on operation.

PDC International Corp.    South Norwalk, CT 06854
Nov 17, 2009 Operating at 50-170 cpm, 60 Series Evolution Shrinksealer applies full-height bodysleeves and tamper-evident banding to jars, bottles, and products of all types. Use of 2 servos for product handling and sleeve registration promotes flexibility. Sleeve label can be designed to extend up over cap, with horizontal perforation for consumer tamper evidence, and shrink sleeves can also be applied as neck bands around upper portion of container and its closure or as full-height safety seals.

Thermo Fisher Scientific    Waltham, MA 02454
Nov 17, 2009 Offering flexibility for QA/QC, life science, and general research methods, Evolution(TM) 60S offers 1.0 nm spectral bandwidth and scanning technology for acquiring spectral data at speeds over 4,200 nm/min. It meets requirements of international pharmacopeias and offers validation tools for regulated marketplace. Requiring no warm-up time, xenon lamp is rated for 3 years of continuous use. System also comes with 6-position cell changer and aluminum base plate single cell holder.

W.A.C. Lighting Company    Port Washington, NY 11050
Nov 17, 2009 Measuring ½ in. tall by 3/8 in. wide, SOLORAIL(TM) delivers 300 W at 12 V and 600 W at 24 V. System offers array of low and line voltage track heads and hand blown glass pendants, including Quick Connect(TM) elements. It can be field cut, joined, and independently powered to create systems of various sizes and looks. Featuring slender profile that bends in field to negotiate curves on ceilings, monorail is suited for residential, retail, hospitality, and commercial applications.

Key Technology, Inc.    Walla Walla, WA 99362
Nov 17, 2009 Able to handle up to 600 lb/hr, Compact Dryer features Allen-Bradley controls and fully adjustable spin speed and cycle time. Isolator support frame allows dryer to be free standing and moved from one location to another. Featuring 23 x 38 in. footprint, dryer can be lifted via forklift or pallet jack as well as manually. To discourage bacteria growth, stainless steel NEMA 4X/IP64 unit has self-draining control box area and minimal horizontal and recessed areas that can trap product.

Universal Balancing Ltd./Reco    Pinckney, MI 48169
Nov 17, 2009 Featuring 2.2 x 2.4 x 1.3 m footprint, self-contained V100S Vertical Axis Balancing Machine provides 99.65% unbalance reduction ratio and is capable of handling any component weighing up to 100 kg that requires correction of unbalance by milling. Milling head delivers 300 Nm cutting torque, accommodates axial through radial positions, and cuts arc angles up to 180°. Capable of balancing in 1 or 2 planes, machine utilizes 10 in. air chuck with 2.5 micron repeatability.

Hobart Brothers Co.    Troy, OH 45373-2900
Nov 17, 2009 Offering all-position welding capabilities, FabCO® XTREME B2, XTREME B3, and XTREME 120 operate on DCEN Direct Current Electrode Negative. XTREME B2 is suited for 1 ¼ Chrome - ½ Moly steels, while XTREME B3 deposits weld chemistry needed for 2 ¼ Chrome - 1 Moly steels. Designed to meet DNV Y69MS (H5) for welding on offshore jackup rigs, XTREME 120 wires produce welds in 120-130 ksi tensile strength range, yield strengths over 105 ksi, and Charpy impact properties of 51 lb-ft at -76°F.