David Weisman, LLC    Stamford, CT 06903
May 14, 2012 Designed to heat, dry, and/or cure products, Vertical Lift Bottom Entry Stainless Steel Electrically Heated Hot Air Convection Oven Systems feature electrically heated or gas fired hot air plenum and controls. Product has insulated stainless or aluminized steel oven enclosure, properly rated exhaust system, multiple selectable preset batch cycle times, and chart recorder for temperature documentation. Operation may be stand-alone or in conjunction with automation equipment.

Vision Engineering Inc.    New Milford, CT 06776
May 14, 2012 Available for stereo inspection microscopes, DimensionOne(TM) menuless image capture and mark-up software utilizes touchscreen technology and smart phone interaction. Captured images can be annotated with colors for maximum on-screen contrast, while circles, lines, points, and angles can be measured using dimensioning feature. Captured image, annotations, and dimensions can then be adjusted using opacity adjuster. Once file is complete, it can be emailed, printed, or saved.

Safety Technology International    Waterford, MI 48327
May 14, 2012 Featuring flat profile and enclosed flush backbox, Universal Stopper® STI-14300 helps seal against damp or dirty locations while offering protection against physical damage and severe environments. Indoor/outdoor cover complies with ADA, is less than 4 in. in depth, and is useful when mounting on uneven surfaces. Other mounting options include surface or flush mounting frames, enclosed backbox with sealed mounting plate, or enclosed backbox with open mounting plate.

Omega Engineering, Inc.    Stamford, CT 06907
May 14, 2012 Featuring NEMA 4X rating, EK Series protects DIN rail mount IEC components, such as circuit breakers, timers, switches, meters, and other control devices. CE Compliant products feature shrouded cut-out and tinted transparent hinged door with push release door latches for access and visibility. Corrosion-resistant and maintenance-free, enclosures are rated for temperatures from -40 to 248°F and are suited for chemical, plastic, and water industries.

Broadcom Corp.    San Jose, CA 95110
May 14, 2012 BCM84790 and BCM84793 gearbox PHYs delivers 4- and 10-lane bi-directional transmission for increased flexibility for network managers. Low power 40 nm CMOS architecture dissipates 2.5 W per port. BCM84790 features 17 x 17 mm BGA package engineered to support CFP network applications, while BCM84793 is 19 x 19 mm package that supports 10-lane bi-directional transmissions at 10 Gbps each. Both devices can be configured to support 4 bi-directional lanes at 10 Gbps for 40 GbE repeater applications.

Larson Electronics, LLC    Kemp, TX 75143
May 14, 2012 Producing 14,790 lumen light output, Model BML-150LED features IP68-rated waterproof LED assembly, aluminum pedestal mount platform, and four 200 lb grip magnetic feet that provide total of 800 lb of gripping force for secure mounting to any ferrous metallic surface. LED lamp, equipped with CREE LEDs and LEXAN lens, is vertically adjustable for optimum work area coverage. Integrally mounted waterproof transformer allows light to operate with 120-277 AC current.

Momentive    Albany, NY 12211
May 14, 2012 By surrounding fragile solar cells of crystalline PV module with flexible, stress dissipating silicone matrix, SilTRUST Encapsulant helps maximize performance in harsh outdoor environments while optimizing light-to-electricity conversion yield. Refractive index of transparent encapsulant closely matches that of glass, minimizing energy-dissipating reflection of sunlight away from solar cell. At 80°C, silicone module is virtually stress-free.

Infolytica Corp.    Montreal, QC H2W2P4  Canada
May 14, 2012 To accurately predict electric motor performance, MagNet v7.3 and ThermNet v7.3 share same model file and run 2-way coupled electromagnetic and thermal simulation. ThermNet, along with capability to account for cooling options, reports global results for temperature, heat capacity, heat flow, and heat source. MagNet includes functionality for freezing operating points of BH property throughout component for use in different simulations. Features work in tandem to optimize simulation.

LumaSense Technologies, Inc.    Santa Clara, CA 95054
May 14, 2012 Used to enhance grid reliability, SmartDGA(TM) Guide helps electric utilities augment condition-based maintenance for transformer and load tap changer (LTC) fleets. System can monitor all 9 gases used in dissolved gas analysis (DGA) as well as moisture, and optional integration with LumaSMART fiber optics technology, which directly measures winding hot-spot temperatures within transformers, lets utilities monitor temperature and gas. Also, design reduces installation time to hours.

Tata Consultancy Services    Rockville, MD 20852
May 14, 2012 Digital Publishing Platform (DPP) lets publishers create, manage, distribute, optimize, and monetize content assets across multiple repositories. Furthermore, functionality lets users build workflows that help create digital products at accelerated pace and enable seamless distribution through multiple channels. Adoption of industry standards and service-based implementation approaches helps improve integration with customer content workflow.

Doosan Infracore American Corporation    Suwanee, GA 30024
May 14, 2012 Powered by 6-cylinder interim Tier 4 compliant diesel engine with gross power output of 365 hp, Model DA30 delivers 1,381 lb-ft gross torque at 1,300 rpm. Transmission offers 8 forward and 4 reverse speeds. Agile undercarriage, designed to ensure that all 6 wheels are in permanent contact with ground, means truck can operate on very rough and soft terrain. Articulation hinge is positioned behind turning ring to provide equal weight distribution to front wheels, even during maximum turning.

Safetek International, Inc.    Brooklyn, NY 11219
May 14, 2012 Intended for meat, poultry, produce, and frozen foods, Safetek Professional Food Service Film is based on polyethylene material that disintegrates in given time period and, when annihilated, burns to hydrogen and carbon with no residual polluting side effects. Cling film is 100% non-toxic, 100% recyclable, and conforms to food contact regulations.

Banner Engineering Corp.    Minneapolis, MN 55441
May 14, 2012 Supporting collision avoidance and vehicle detection, R-GAGE Series of radar-based sensors have capability to detect large objects in outdoor environments. Frequency Modulated Continuous Wave (FMCW) radar, unaffected by rain, snow, wind, fog, light, humidity, or temperature, promotes reliable detection and can also detects stationary objects that cannot be detected by Doppler radar. Distance capabilities minimize dead zones, and dual-zone signaling prevents damaging collisions.

Nameplates For Industry, Inc.    New Bedford, MA 02745
May 14, 2012 Custom-fabricated for medical devices and laboratory instruments or equipment, Front Panel Graphic Overlays feature digital printing with fine lines, full-color images, unlimited colors and color gradients, selective texturizing, embossing, precision cutouts, and colored windows. Overlays can be printed with up to 230 line screen and 1,200 dpi resolution on variety of substrates, and with adhesives engineered to meet OEM requirements for solvent resistance and weatherability.

Technology Container Corp.    Shrewsbury, MA 01545
May 14, 2012 Available in 12, 16, and 21 gallon sizes as well as under-bed styles, PackAways(TM) Corrugated Plastic Storage Boxes have self-locking bottom and top design that pops into place, eliminating need for tape and glue. Boxes are stackable, lie-flat when not being used, and can be reused hundreds of times. Unaffected by water and humidity, boxes have special end and side panels that can be written-on and wiped-off repeatedly.

Ohmite Mfg.    Rolling Meadows, IL 60008
May 14, 2012 C-series heatsinks feature camming clips that eliminate need for mounting holes and screws and provide same amount of force after repeated use. They are now offered in 30, 58, and 85 mm for TO-264 packages. Series is also offered in 25, 50, and 75 mm lengths for TO-220 and TO-247 devices, and TO-126 heatsinks are offred in 25 mm for single clip and 40 mm for 2 clips. Custom lengths and clip quantities are available.

Monroe PMP, a 3Sixty Group Co.    Auburn Hills, MI 48326
May 14, 2012 Available in swivel and rigid models and in top plate and stem mount versions, Industrial Casters offer range of options to handle loads from 75-1,500 lb. Units come in steel or stainless steel, with various finishes including nickel, zinc, black oxide, polished brass, and chrome. In addition, casters offer thermoplastic rubber, full pneumatic, polyurethane, cushion solid rubber, and cast iron wheel options with Delrin, plain, roller, or ball bearings.

KASO Plastics    Vancouver, WA 98682
May 14, 2012 Utilizing 3D printer (Fortus 250) to produce ABS prototype parts, rapid prototyping service can benefit from validation of new product design concepts prior to manufacturing. Resulting 3D prototypes can identify possible flaws early in prototyping process, saving time and investment for customers. ABS prototype parts can be created that exhibit as much as 80% strength of traditional plastic injection parts.

One-Cycle Control, Inc    Irvine, CA 92618
May 14, 2012 Measuring ~1.2 ft³, hardware-enabled 3-phase 50 A Model OCC-APF reduces harmonics to less than 5% and optimizes power factor to greater than 0.99 in real-time, eliminating problems caused by harmonic-pollution and freeing up capacity on facility transformer, protection equipment, and wiring. Suitable for wall or rack mounting, 40 kVA filter is scalable to higher power by sliding multiple units into 19 in. rack.

Curlin, Inc.    Tampa, FL 33619
May 14, 2012 Designed to move high volume of air while using minimal energy, Serco HVLS Fans feature patented blade system that creates large downwards flow of air in column that spreads out in all directions at floor level. In warm months, air circulation can create cooling effect, while in cool months, fans can operate in reverse, circulating hot air trapped at ceiling level. With iFan(TM) controls, up to 30 fans can be networked and controlled from central location.