Visage Imaging, Inc.    CA, CA 92008-7340
Dec 02, 2009 Targeting radiologists, technologists, sub-specialists, and referring physicians, Visage® 7 Universal Viewer offers single thin client based application for primary interpretation of any type of exam, from plain film to cardiac CT. Program may be used as thin viewing layer on top of existing PACS, or it can serve as turnkey solution covering RIS, archive, viewing, and post processing. Instant access to image data is provided through thin client streaming protocol.

City Technology Ltd    Portsmouth PO6 1SZ  United Kingdom
Dec 02, 2009 Developed specifically for medical applications, NO sensor allows manufacturers of breath monitoring equipment to develop smaller instruments. Design does not require sample of exhaled breath to be adjusted to particular temperature or pressure to achieve reliable reading, and only 10 sec exposure is required to achieve reading with resolution down to 10 ppb. Operating over 10 to 30°C range, product is rated for 2,000+ exposures and operates on catalytic, non-consumable principle.

SYCODE    Alto Porvorim 403521  India
Dec 02, 2009 With Autodesk Inventor Import plug-in, users can import Inventor part and assembly files into AutoCAD without Inventor license on computer or network. Program can read Inventor part IPT files from Inventor 6 to 2010 and assembly IAM files from Inventor 11 to 2010. Plug-in is powered by 3D InterOp technology from Spatial, which provides CAD file format data exchange as well as repairing and healing features.

Cypress Semiconductor Corp.    San Jose, CA 95134
Dec 02, 2009 Model CY8C28xxx PSoC® 1 integrates up to 16 programmable analog and 12 digital blocks with 8-bit MCU. It supports up to 4 simultaneous Delta-Sigma ADCs with 6- to 14-bit resolution, allowing it to sample up to 4 analog inputs simultaneously at 62 KS/sec, with aggregate sample rate of 248 KS/sec. Unit can directly drive LCD and includes dual hardware I²C interfaces. Operating in temperatures from -40 to +85°C, it also has 2 parallel CapSense® touch-sensing channels.

Cypress Semiconductor Corp.    San Jose, CA 95134
Dec 02, 2009 As accelerated sideloading solution, Turbo-MTP(TM) 2.0 firmware module enhances West Bridge® peripheral controllers by enabling transfer of multimedia files from PC to handheld device via Media Transfer Protocol (MTP) at speeds to 30 MBps. Module includes drivers for Android OS, optimizing handheld compatibility, and is supported in West Bridge Antioch Development Kit as well as West Bridge Astoria Development Kit.

Imagination Technologies Ltd    Hertfordshire WD4 8LZ  United Kingdom
Dec 02, 2009 Offering development environment for creation of OpenGL ES 2.0 as well as OpenGL 1.1 and OpenVG applications, POWERVR Insider SDK comprises comprehensive set of utilities, Displacement Mapping and Shadow Mapping training courses, Fur and Coverflow demos, and documentation. PVRShaman graphical shader environment includes built-in models that minimize need to load 3D models for testing shaders, and also supports full blending controls, enabling extensive complex scenes to be prototyped.

Lamantine Software    Kremenchuk 39610  Ukraine
Dec 02, 2009 With discreet interface that stays out of user's way until needed, Sticky Password v4.0 incorporates password filling engine and does not require extra tool bar on browser. Identities feature ensures users are only one click away from completing online forms, including multiple-page logins, for websites and applications. Also, encryption algorithms ensure security of passwords, logins, and other personal data to protect against identity theft.

Imagination Technologies Ltd    Hertfordshire WD4 8LZ  United Kingdom
Dec 02, 2009 Featuring 32-bit META processor, POWERVR VXE380 encodes video sequences and still images to wide range of compression standards, including H.264 High, Main, and Baseline Profiles, H.263, MPEG-4, M-JPEG, and JPEG. Unit features scalable design, allowing Full HD video to be encoded while offering ability to record at high frame rates for detailed slow motion capture. It is fully supported by accompanying software stack, which includes OpenMAX IL compliant API under Linux.

Nsasoft LLC.    Yerevan 0096  Armenia
Dec 02, 2009 Run under Windows® 2000/XP/2003/Vista, Product Key Explorer v2.3 enables administrators to scan network computers and retrieve product keys for MS Windows, SQL Server, Office, and 1,000+ other software products. Functionality allows for copying or printing of license keys for backup purposes, recovering forgotten CD keys, and tracking number of software licenses installed on network. Solution also aids in critical licensing information centralization.

Mercury Computer Systems, Inc.    Chelmsford, MA 01824
Dec 02, 2009 OpenVPX Reference Design Kits provide customers with engineering blueprint for development of OpenVPX-compliant air- and conduction-cooled 3U and 6U payload/switch modules. Kits include CAD models, mechanical assembly information, thermal information, bills of material, and technical support. OpenVPX Reference Design Kits are licensed intellectual property, with several available options that vary according to duration of product updates and support services.

Imagination Technologies Ltd    Hertfordshire WD4 8LZ  United Kingdom
Dec 02, 2009 As multi-standard and multi-stream HD hardware video decoder IP core, POWERVR VXD390 offers broadcast-quality video scaler, error and non-compliant stream handling capabilities, JPEG processing, and optimizations for DDR3 memory support. It also supports all international broadcast standards, and support for MPEG-4 and H.264 profiles lets customers create DivX® format-compliant solution. Product can also decode multiple streams simultaneously to meet various decode requirements.

NXP Semiconductors    NanGang District   Taiwan
Dec 02, 2009 Designed to optimize energy efficiency and standby performance of power supplies under 75 W, GreenChip TEA1733 is suitable for netbook adapters, printer adapters, and LCD monitor supplies. Switched Mode Power Supply controller IC enables standby power levels less than 100 mW. Featuring input voltage range of 12-30 V, device requires low start-up current of 10 µA and consumes 1.25 mA. It provides fixed switching frequency with frequency jitter to minimize EMI.

XP Power    Sunnyvale, CA 94085
Dec 02, 2009 Available in 150, 300, and 500 W models, LCL Series accepts full universal input voltage of 85-264 Vac without need for selector switches. Each power range provides nominal output voltages of +12, +13.5, +15, +24, +27, or +48 Vdc. Output can be adjusted by ±1 V of stated output to compensate for cable losses or non-standard voltage requirements. Featuring chassis mount, enclosed design, 150 W units are convection cooled while 300 and 500 W models utilize integral cooling fan.

LEDAS Ltd.    Novosibirsk   Russian Federation
Dec 02, 2009 Based on LGS 3D geometric constraint solving software component, Driving Dimensions v1.2 makes advanced MCAD technology available to all users of Google SketchUp software. Any dimension/parameter can be modified in any SketchUp model with one click, and all driving dimensions set in one model are satisfied simultaneously. Only changes that occur are those needed to satisfy new parameter values. Solution also supports translation of tooltips and system messages into other languages.

SYCODE    Alto Porvorim 403521  India
Dec 02, 2009 Pro/ENGINEER File Import Plug-in for AutoCAD lets AutoCAD users open 3D solid models designed in Pro/ENGINEER and carry out solid modeling operations on them. It can read Pro/ENGINEER part PRT and assembly ASM files from Pro/ENGINEER v16 to Pro/ENGINEER Wildfire v4.0. Program can repair files with corrupt or invalid data, correct differences in precision, and log data translation problems and errors. It works with 32- and 64-bit AutoCAD 2000 through 2010.

Hypertherm, Inc.    Hanover, NH 03755 0010
Dec 02, 2009 Featuring Extreme HyDefinition® technology, HyPerformance® HPR130XD® and HPR260XD® offer argon capabilities, 80 A mild steel bevel process, and PowerPierce(TM) technology for optimal piercing capability. Lead set offers wear resistance, while torch sleeve with integrated bearing design enables infinite rotation. With optional integrated laser pointer, users can accurately align torch on centerline axis or receive visual feedback for programming and robot alignment.

Cummins Power Generation Americas    Minneapolis, MN 55432
Dec 02, 2009 Using engine combustion technology that works with after-treatment filter to reduce PM emissions levels, G Drive series meets US EPA Tier 4 Interim and European Stage IIIA off-highway emissions regulations. Cooled exhaust gas recirculation enables required 45% reduction in NOx. In addition to standard features such as Variable Geometry Turbochargers, electronic controls, and high-pressure common rail fuel systems, optional features include complete CoolPac cooling option.

Delphi    Longmont, CO 80504
Dec 02, 2009 With Delphi Truck Diagnostic solution, technicians can perform dealer level diagnostics, accessing and interrogating full range of sub-systems featured on modern trucks such as engine management, emissions, suspension, safety and security, transmission, braking systems, and air conditioning. Solution provides aftermarket and diesel specialists coverage of European truck, trailer, and commercial vehicles market, including all applications with electronic control unit.

Siemens    New York, NY 10022
Dec 02, 2009 Bringing together 2D, 3D, and 4D reading in one place, syngo®.plaza agile Picture Archiving and Communications System (PACS) solution for clinical routine promotes efficiency when working with multimodality images. This is achieved via automatic identification and subsequent call-up of corresponding applications as well as no-click integration to syngo®.via imaging software and unified UI. Also, Patient Jacket functionality enables at-a-glance viewing of patient history.

Dynabrade, Inc.    Clarence, NY 14031
Dec 02, 2009 Suited for heavy-duty applications, Die Grinders are available with .5 or .7 hp air motors. Each tool features rubber grip housing to insulate operator from vibration and cold air transmission, and ¼ in. collet that can be changed to 3/8 or 1/8 in. collet with available inserts. Offered in front and rear exhaust designs, Die Grinders provide speeds to 20,000 or 24,000 rpm. Rear exhaust models can accept overhose assemblies for minimized sound levels and/or exhaust redirection.