VizUp Technology    Vancouver V6R 2H9  Canada
Jan 04, 2010 VizUp v3.5.5 Ultimate simplifies large 3D models that have been converted from CAD/CAM/CAE. Program can automatically choose parameters suitable for individual models to retain relevant reduction information. Process of file optimization results in deletion of some vertices, but does not change coordinates of remaining ones, resulting in minimal distortions during texture mapping. Software runs under Windows 98/Me/NT/2000/XP/2003/Vista.

Diodes, Inc.    Westlake Village, CA 91362
Jan 04, 2010 Housed in standard SOP-8L and exposed pad MSOP-8L-EP packages, active low enable Model AP2145 and active high enable Model AP2155 protect consumer, computing, and communication applications subject to heavy capacitive loads and short circuits. Units are rated at 0.5 A with transient response time of 10 µs and 1 A current limiting capability. Switches offer reverse current blocking; over-current, over-temperature, and short-circuit protection; controlled rise-time; and under-voltage lockout.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Jan 04, 2010 Optimized for brushless DC motor control applications, 8-bit Series S08MP16 includes industrial and automotive versions with bus speeds of 25 and 20 MHz, respectively. Units feature 3 high-speed analog comparators, 1 KB RAM, 12-bit ADC with PWM hardware triggering, and differential programmable gain amplifier. Two FlexTimers provide selectable input capture, output compare, edge- or center-aligned PWM, dead time insertion in hardware, and fault inputs.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Jan 04, 2010 QorIQ P1012/P1021 processors offer one or two 800 MHz cores based on Power Architecture® technology and provide data- and control-plane processing. Pin-compatible with existing QorIQ P1 and P2 products and software-compatible with several PowerQUICC II Pro/PowerQUICC III processors, they support legacy interfaces and protocols such as T1/E1, xDSL, ATM, HDLC, and 10/100/1000 Ethernet. Units have high-performance L2 cache memories and SGMII, USB 2.0, and PCI Express® interconnect technologies.

L.S. Research, Inc.    Cedarburg, WI 53012
Jan 04, 2010 ProFLEX(TM) module is based on Texas Instruments' CC2520 2.4 GHz IEEE® 802.15.4(TM) and ZigBee® transceiver, MSP430 microcontroller, and CC2591 RF front end. It can transmit at up to 100 mW RF output power for long-range applications. Unit incorporates AES encryption for secure networks, 256k program flash, as well as PIFA antenna, and option for external antenna is also available. Included software is based on IEEE 802.15.4 and ZigBee software stack.

NEC Electronics    Santa Clara, CA 95050
Jan 04, 2010 Model uPG2406T6R switches measure 1.0 x 1.0 x 0.37 mm in 6-pin TSSON package and uPG2406TK and uPG2408TK units measure 1.5 x 1.3 x 0.5 5 mm in 6-pin L2 MM package. Units operate at frequency of 10 MHz to 3.0 GHz and with supply voltage of Vcont at 1.2 equal to +1.8-5.3 V/0 V. They also operate with isolation of 18 dB typical at frequency of 2.5 GHz. Applications include cellphones, smartphones, Wi-Fi client devices, 802.15.4/ZigBee, NFC, and Bluetooth.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Jan 04, 2010 Designed to be placed beneath components such as ICs, LXFC Series built-in capacitor 1005 size measures 1.0 x 0.5 mm with 50 µm thickness. Unit provides 0.1 µF capacitance and insulation resistance at 4 V of 1 MW, as well as nominal voltage of 4 V. Mounting between LSI bumps, product can be used with component built-in substrates for mobile equipment and modules.

Emerson Network Power    St. Louis, MO 63136
Jan 04, 2010 Featuring compact, open-frame design, LPT100-M series triple-output power supplies measure 2 x 4 in. with height of less than 1U (1.28 in.). They operate in temperatures from 0-50°C and can cold start from as low as -20°C. Offering adjustable 80-130 W range of output power, series feature full-load efficiency of 82%, power density of 12 W/cu in., and universal 90-264 Vac input. With safety-ground leakage current of 275 µA, units include short-circuit and overvoltage/overtemperature protection.

Emerson Network Power    St. Louis, MO 63136
Jan 04, 2010 Model DS2900 is rated for up to 2,900 W of adjustable output power at 240 A and includes 12 Vdc output as well as 3.3 Vdc auxiliary output. Offering power density of more than 24 W/cu in., supply accepts input voltage range of 180-264 Vac with no minimum load requirement. It is equipped with active PFC rated at 0.99 typical and is protected against overvoltage up to 130%. Operating in 0-50°C temperatures, unit has 40 x 28 mm variable speed fan that optimizes energy efficiency.

Emerson Network Power    St. Louis, MO 63136
Jan 04, 2010 Available in 3 models for industrial applications, ADN-C Series offers power ratings of 120, 240, and 480 W. All models feature adjustable, nominal output voltage of 24 Vdc and accept universal input voltage range of 85-264 Vac to support international operation. Measuring 50-87 mm wide, power supplies are equipped with active PFC greater than 0.92. PowerBoost(TM) overload capability enables units to withstand high inrush loads, while 3 LED provide status monitoring.

Hendon Semiconductors Pty. Ltd.    Hendon 5014  Australia
Jan 04, 2010 Available in SO-16 RoHS-compliant package, Model IES5528 provides negative triac gate pulses that avoid insensitive triac trigger quadrants. External configurability makes device suitable for variety of mains power control applications. For example, Model IES5528 can be used as soft start motor controller to eliminate effect of high starting torque as well as for synchronous On/Off switching and time proportional temperature control.

Digi International    Minnetonka, MN 55343
Jan 04, 2010 Suited for building automation and security, MiniCore Ethernet RCM5760 and Wi-Fi RCM5650W modules offer up to 640 KB SRAM for data storage, 1 MB flash memory for program storage, and 2 MB serial flash for mass storage. Both pin-compatible modules, supplied in mini PCIe form factor, facilitate placement of wired/wireless network connectivity on motherboard. Depending on version, modules include up to 32 GPIO, 6 serial ports, serial-to-Ethernet bridge, and embedded Web server.

Wastecorp Pumps, LLC    Grand Island, NY 14072
Jan 04, 2010 Available with electric, hydraulic, or pneumatic drive system, 2 in. Mud Sucker 2B-EC features all marine grade aluminum body with steel frame and 7 in. diaphragm with contoured velocity channel. Standard drive is 1 hp, 1,800 rpm, 3-phase/60 Hz, 110/220 V motor. For engine driven pump needs, Mud Sucker 2B-M includes 3 hp Honda® GX-100 engine and is available with 1.5 or 2 in. connection. Units are suited for up to 20 gpm transfer of waste oil, vegetable oil, wastewater, and slurries.

Analog Devices, Inc.    Norwood, MA 02062-9106
Jan 04, 2010 Requiring single supply from 2.5-3.3 V, ADL5504 TruPwr(TM) is suited for high frequency receiver and transmitter signal chains from 450-6,000 MHz. Input is internally ac-coupled and has nominal input impedance of 500 W, while RMS output is linear-responding dc voltage with conversion gains of 1.87 V/Vrms at 900 MHz. Housed in 0.8 x 1.2 mm WLCSP package, detector is useful for measuring high crest factor signals such as W-CDMA, CDMA2000, WiMAX, WLAN, and LTE waveforms.

Intersil Corporation    Milpitas, CA 95035
Jan 04, 2010 Designed to extend battery life for general-purpose portable applications, ISL21080 analog voltage references feature supply voltage operation at 310 nA typ and operating current of 1.5 µA max. Initial accuracy is as low as ±0.2%, and temperature coefficient is 50 ppm/°C. Output voltages can be used as precision voltage sources for voltage monitors and control loops, and as standby voltages for low-power states for DSP, FPGA, Datapath Controllers, and MCUs.

Intersil Corporation    Milpitas, CA 95035
Jan 04, 2010 Suited for applications requiring optimal DC accuracy and AC performance, Models ISL28107 and ISL28207 are single and dual amplifiers, respectively, available in 8-lead SOIC packages. Both come in standard pin configurations and operate over extended temperature range of -40 to +125°C. Applications include precision active filters, medical and analytical instrumentation, precision power supply controls, and industrial controls.

HANKWANG USA, INC.    Lombard, IL 60148
Jan 04, 2010 Series PL features Beam Radius Control, which adjusts beam diameter for different material thicknesses, and Constant Beam Delivery System that ensures consistent length of beam over work area. System includes S5 High-Speed Cutting Head that allows up to 1,120 ipm for 20 ga mild steel and 790 ipm for 16 ga SS. Tube cutting rotary axis supports tubes up to 12 in. OD. Unit has plasma monitoring unit, lens crack sensor, as well as touchscreen CNC to simplify setup/operation.

HANKWANG USA, INC.    Lombard, IL 60148
Jan 04, 2010 Series PS Laser Cutter includes Beam Radius Control to adjust beam diameter for material type/thickness and Constant Beam Delivery System that provides precise beam delivery over length of work area. Unit features S5 high-speed cutting head that operates at up to 1,120 ipm on 20 ga mild steel and 790 ipm on 16 ga stainless, as well as plasma monitoring unit and lens crack sensor. Siemens SINUMERIK 840D with 15 in. touchscreen, high-efficiency air filter, and dehumidifier are also integrated.

HANKWANG USA, INC.    Lombard, IL 60148
Jan 04, 2010 Series TL features cutting head that uses quick piercing nitrogen-injection technology and measurement/sensing mechanisms that enable change from signal size to pulse monitoring to optimize cutting conditions. Able to cut up to 0.25 in. thick mild steel and 0.2 in. thick stainless steel in sizes up to 21 ft long and with 6 in. dia., unit incorporates Siemens SINUMERIK 840D for maintaining complete processing cycle control by single operator, using touchscreen and simple language commands.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Jan 04, 2010 Measuring 8 x 8 mm with 3.8 mm profile, LQH88P_38 series inductors are designed for DC-DC converters that are used in flat screen TVs, set-top boxes, wireless base stations, and other electronic applications. Ferrite resin coating magnetically shields inductors and prevents interference with other devices and circuits. Series comes in inductance values between 1-100 µH and features DC resistance down to 0.006 W.