Loadstar Sensors, Inc.    Mountain View, CA 94043
Jan 14, 2010 Intended for iLoad Series digital USB load cells, HX-100 hybrid load cell interface lets user simultaneously obtain digital and analog output from same load cell. Load cell outputs calibrated load data in lbs/Newtons/kgs to PC as well as 0-5 Vdc analog output. Users are also able to input force data into DAQ system or PLC while monitoring data digitally on PC or Mac. On-demand or continuous modes are available for display of loads.

Kahn Instruments, Inc.    Wethersfield, CT 06109
Jan 14, 2010 Easidew PRO I.S. Dewpoint Transmitter is designed for continuous measurement of moisture content of gases and offers dewpoint measurement range of -148 to +68°F with accuracy of ±3.6°F. Ruggedized unit's output is configurable in °F or °C dewpoint or PPMv moisture content. Device operates from 12-28 Vdc power source and has operating pressure up to 5,000 psig. Heavy duty, process type NEMA 4, weatherproof stainless steel housing has ½ in. NPT conduit entry fitting.

Ansell Healthcare LLC    Iselin, NJ 08830
Jan 14, 2010 Ergonomically designed HyFlex® 11-511 gloves provide tactile, firm grip in light-oil and dry applications to enhance confidence while handling metals and other sharp objects. Intercept Technology® - yarn incorporating Kevlar® Stretch Armor Technology - in liner provides ANSI Level 4 cut protection, and extended cuff protects sensitive wrist area. Offered in sizes 6-11, gloves are 100% free of silicone and latex. Finger length promotes dexterity, flexibility, and comfort.

Holocom, Inc.    San Diego, CA 92121
Jan 14, 2010 Exterior, building-mounted Secure Enclosure SEC-WM-EXT1-H1 interfaces between mobile military tactical communications platforms and building voice/data networks. Interface allows real-time tactical communications to feed into building's office, conference room, VTC room, or operations center from tactical communications platform parked outside building. It also ensures tactical communications cable feed without compromising environmental protection to cable interface.

Sherwin-Williams    Cleveland, OH 44115
Jan 14, 2010 With low temperature cure at 20ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment facilities, including clarifiers, settling tanks, wet wells, and grit chambers.

Kingston Technology Co., Inc.    Fountain Valley, CA 92708
Jan 13, 2010 Offering up to 30 GB capacity, SSDNow V Series has 2.5 in. form factor, uses NAND Flash memory components, and helps desktop users extend lifecycle of their systems. Performance is optimized via up to 180 MBps read and 50 MBps write speeds and functionality where PC OS and key applications reside on SSD while all data remain on HDD. Shock and vibration resistant unit supports SMART, has 500,000 hr MTBF rating and consumes 55 mW typ during idle/standby/sleep.

Semtech Corp.    Newbury Park, CA 91320
Jan 13, 2010 Intended for applications using ISM frequency band, SX1231 operates from 290-1,020 MHz and can be programmed between narrow- and wide-band communications modes without modifying external components. Its 16 mA receive current and 33 mA transmit current extend battery life, and integrated packet engine offloads RF packetization from MCU and provides CRC error checking, AES-128 encryption, and 66-byte FIFO. SAW filter functionality, VCO tank, PLL loop filter, and RF switch are integrated.

Universal Instruments Corp.    Binghamton, NY 13902 0825
Jan 13, 2010 With 5.0/7.5/10.0 mm triple-span, Radial 8XT Insertion Machine optimizes PCB coverage by automating placement of components that, until now, have required manual insertion. Machine is available in both stand-alone and pass-through configurations and will benefit power supply, white goods, military, and aerospace electronics production. In addition, 15 mm dispense head tooling is available to minimize dispense time requirements.

congatec AG    Deggendorf   Germany
Jan 13, 2010 Measuring 95 x 125 mm, conga-BM57 is equipped with 2.66 GHz Intel® Core(TM) i7-620M processor, 4 MB L2 cache, and up to 8 GB dual channel DDR3 memory. Two-chip solution also utilizes Mobile Intel® QM57 Express Chipset. Integrated graphics controller supports Intel® Flexible Display Interface to allow 2 independent video channels on VGA, LVDS, HDMI, DisplayPort, or SDVO interfaces. With Intel® Turbo Boost Technology, clock speed for one processor core is boosted if other core is less utilized.

Delkin Devices, Inc.    Poway, CA 92064
Jan 13, 2010 Available in 8, 16, 32, and 64 GB capacities, 420X PRO CompactFlash cards utilize high-grade NAND Flash and include built-in Error Correction Code to automatically detect and correct errors that might occur during data transfer. Suitable for storing high-resolution images and HD video, products are compliant with current CompactFlash specifications and support Ultra DMA mode 6.

Cooler Master Inc.    Fremont, CA 94539
Jan 13, 2010 Constructed with see-through acrylic side panel, Cooler Master AMD Edition has porous exterior that optimizes heat dissipation. Cooling system employs dual 230 mm fans, and one on top can be outfitted with up to three 120 mm fans for optimized air exhaustion. Independent air intake can be used to cool bottom-mounted PSU or driven by two 120 mm fans. Optionally, design provides retaining holes to support water cooling and allots room for adding radiator to inside top of case.

Lattice Semiconductor Corp.    Hillsboro, OR 97124
Jan 13, 2010 Controlled via switches and push buttons, ispClock5400D Evaluation Board demonstrates how to interface CMOS interface oscillator to programmable ispClock(TM) 5400D device to produce clocks for XAUI applications or 270 MHz SDI video applications. System, based on 6 x 4 in. evaluation board, features ispClock(TM) 5406D differential clock distribution device in Pb-free, 48-pin QFNS package; SMA connectors and XO circuits; as well as expansion headers for JTAG, I²C bus, and test.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Jan 13, 2010 Integrating with ADMS Intermedia Delivery System(TM), ADC-200BR 200-disc Blu-ray changer can be cascaded to hold 1,000 discs, automatically integrating collection into ADMS media library. CEN-NAS-4TB, delivering 4 hot-swappable 1 TB hard drives with RAID 5 protection, can store 1,500 movies and 150,000 songs. ADMS accesses any type of entertainment or information from variety of content providers and displays selections in full 1080p and digital surround sound.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jan 13, 2010 Designed for challenging batch processing applications, Model T-50 features 40 x 50 in. blast cabinet with 30 in. dia x 15 in. deep basket that provides working capacity of 1 ft³ or 75 lb of components per batch. Rotation speed of basket is adjustable, so tumbling action of different components can be optimized. Fed by 3.5 ft³ capacity pressure vessel, 2 pressure-blast nozzles are mounted on adjustable brackets. Machine can be optionally provided with front discharge chute.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Jan 13, 2010 Designed to transmit strain torque, thermocouple, or voltage signals on rotating or moving machinery while operating in contactless mode, Series 8179 Universal Single-Channel Telemetry System provides maintenance-free continuous operation. Power is transferred inductively and signal is RF-transferred between moving and static component - no brushes or wires required. Remote shunt-calibration feature enables strain gage configurations to be checked, even during measurement.

TURCK, Inc.    Plymouth, MN 55441
Jan 13, 2010 Diagnostic Power Conditioner (DPC) system has been expanded with Single Segment Redundant Backplane, which can combine 2 isolated power supply modules into one FOUNDATION(TM) fieldbus segment. Backplane integrates diagnostic unit used to monitor redundancy of external bulk power supply along with H1 power supply. Measuring 210 x 42 x 113 mm, backplane footprint is designed for DIN rail mounting, and separate connections are provided for grounding and shielding.

Linear Technology Corp.    Milpitas, CA 95035
Jan 13, 2010 Operating from input voltage range of 2.7-20 V, Model LTC3588-1 integrates low-loss, full-wave bridge rectifier with buck converter to harvest ambient vibrational energy via piezoelectric transducers and then convert it to regulated output. DC/DC converter delivers up to 100 mA of continuous output current, and output can be programmed to 1.8, 2.5, 3.3, or 3.6 V fixed voltage. Housed in 3 x 3 mm DFN or thermally enhanced MSOP-10 package, IC features no load quiescent current of 950 nA.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 13, 2010 Powered by Intel® Celeron® Dual Core 2.2 GHz or Core 2(TM) Duo 3.0 GHz CPU, D-Series features 15 and 17 in. touch screens with footprints sized to match standard cash drawers in point-of-sale and point-of-service applications. Range of I/O port connection options are available, and motherboard, HDD, and power supply are accessible and field-replaceable. Offered with 3 types of touch technologies, computers support range of optional, field-installable POS peripherals.

MAG IAS, LLC    Erlanger, KY 41018
Jan 13, 2010 As dual-spindle, 5-axis gantry mill, U5-1500DR is suited for lean production of large parts. Dual ram design enables simultaneous 5-axis, 5-side machining of 2 identical parts, mirrored parts, or 2 features at same time on one part. In addition to interchangeable heads, center features 2 spindle rams on modular gantry platform. It is adaptable for range of part size and shape requirements, with 14 ft X axis (expandable in 12 ft increments), 16.4 ft Y axis range, and 5 ft Z axis travel.

Molex Inc.    Lisle, IL 60532-1682
Jan 13, 2010 EdgeLine(TM) CoEdge Connector is one-piece, 25 Gbps connector that is configured to meet industry standard pitch of .031 in. Low-profile, dual-sided edgecard connector supports 16 PCB thickness variations with multiple circuit sizes. Ensuring PCBs are aligned at centerline to allow for uniform signal path across length of connector, unit also includes keying and locking features to secure unit to PCB and simplify board alignment during mating.