International Rectifier Corp.    El Segundo, CA 90245
Jan 07, 2010 Featuring 70 V active clamp, single-channel Model AUIPS2051L and dual-channel Model AUIPS2052G shut down in event of over-temperature or over-current conditions, restarting once input is turned off and on again. Devices provide diagnostic information via serial resistor connected to input pin. Designed with 75 V technology, switches are intended for 24 V automotive environments including truck junction box applications. Both are RoHS-compliant and provide ESD protection.

International Rectifier Corp.    El Segundo, CA 90245
Jan 07, 2010 Featuring 200 V technology, IR11672A SmartRectifier(TM) IC drives N-channel power MOSFETs used as synchronous rectifiers in isolated flyback and resonant half-bridge converters. MOT protection circuitry prevents reverse current at very light load or no load conditions, and minimizes power shutdown spikes that cause avalanche breakdowns during power off. With Vcc operating range of 11.3-20 V, RoHS-compliant device features max switching frequency of 500 kHz and 7 A peak turn-off gate drive current.

Microsemi    Irvine, CA 92614
Jan 07, 2010 Featuring PureBLACK(TM) technology, LX6503A(TM) Inverter Controller optimizes black-level quality and dynamic contrast performance in 40 in. and larger LCD TVs. Unit features soft-start capability, fault indication, and flexible configuration support for push-pull, full-bridge or half-bridge drive topologies. Synchronization functionality synchronizes both frequency and phase of lamp current between inverters, or to external signals from variety of sources.

Lee Spring    Brooklyn, NY 11220
Jan 07, 2010 Fabricated using Ultem(TM) PEI resins, LeeP(TM) springs combine strength of metal with attributes of engineered thermoplastics. Various standard sizes are available, each in range of strengths (identifiable by distinct colors), and dielectric insulating material is suitable for non-conductive applications. With strength to weight ratios that optimize performance while reducing mass, corrosion-resistant and non-magnetic products also withstand temperatures to 340°F.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Jan 07, 2010 Using 1.4 micron OmniBSI(TM) pixel architecture, 14.6 megapixel Series OV148xx includes Model OV14810 for digital still/video cameras and Model OV14825 for mobile applications. Featuring 1/2.33 in. format, Model OV14810 has active array of 4,416 x 3,312 backside illumination pixels operating at 15 fps in full resolution, or delivering full 1080p HD video at 60 fps. Sensor provides additional pixels in full HD video mode for electronic image stabilization.

Teknor Apex Co.    Pawtucket, RI 02861
Jan 07, 2010 As alternative to powder blends and plastisols, Tek-Spheres(TM) provide automotive instrument panel, airbag cover, and interior trim manufacturers with molded-in color and tactile properties. Vinyl, 0.004 in. dia microbeads, produced in Shore A durometers from 55-90, flow freely over inside of hollow molds in processes such as slush molding and rotomolding. Completely homogeneous material melts rapidly in contact with heated mold, resulting in uniform dispersion of color and additives.

Magna-Power Electronics    Flemington, NJ 08822
Jan 07, 2010 With sampling rate of 5 ms, Photovoltaic Power Profile Emulation Software automatically calculates solar array voltage and current profiles based on user-defined parameters. Profiles can be sequentially sent to power supply, which will emulate defined characteristics. Program offers auto-sequencing through profiles at user-defined intervals, and up to 50 voltage and currents points per curve, with piecewise linear approximation performed between points.

Exact Metrology, Inc    Algonquin, IL 60102
Jan 07, 2010 Enabling user to scan target objects from any angle with no mounts or markers required, 1.4 kg Artec MH 3D Scanner captures 3D images at speeds to 15 surfaces/sec. Operators walk around object and scan it from various angles, and accompanying software combines all scanned images into one. Equipped with 30° x 21° field of view 3D and mega-pixel 2D sensors, 180 x 187 x 260 mm scanner can capture shape and surface texture of objects in snap-shot or video mode.

HMS Industrial Networks, Inc.    Chicago, IL 60607
Jan 07, 2010 By operating simultaneously as Profibus-DP Slave on Profibus network and as CAN node on J1939 network, Anybus intelligent gateway enables Profibus-DP Master to read and write J1939 network data for control and monitoring tasks. Data is exchanged from either network based on user-defined configuration, and Windows-based tool lets user map J1939 parameter (PGN) data into module's I/O tables. Ruggedized design allows service across variety applications and industries.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 07, 2010 Rated at 2 A and 250 Vdc/250 Vac, RoHS-compliant G13 Style SMT Assembly supports PCBs and LED strip lighting modules found in standard T8 and T12 fluorescent LED retrofit tubes. Surface mount hold-down provides stability of connector during insertion and/or extraction of LED tube. Compatible with FR4 and aluminum clad PCBs, assembly has UL 94 V0 rated, high temperature-resistant thermoplastic housing. End-cap cover interfaces with connector assembly, heat sink, and tube.

Conveyor Components Co.    Croswell, MI 48422
Jan 07, 2010 Featuring 2 SPDT micro switches rated for 20 A at 120, 240, or 480 Vac, Model TA-2 TPS indicates when tripper of shuttle conveyor is located on multiple discharging point. Switch actuation is bi-directional, and roller orientation is field adjustable via hex bolt. Measuring 3 in. dia x 1 5/8 in. wide, white acetyl roller withstands pressure, wear, and chemical attack. Cast aluminum enclosure offers NEMA 4 weatherproof rating or NEMA 7/9 explosion-proof rating.

Schunk    Morrisville, NC 27560
Jan 07, 2010 Based on electro-permanent magnets, MAGNOS Clamping Systems require short pulse of electricity to activate and deactivate magnetic field. Poles' quadratic geometry ensures uniform clamping force. Different pole sizes of 32, 50, 75, and 100 mm are available, enabling holding forces to be tailored to requirements. Acting as workpiece support, pole extensions allow user to position different workpieces rapidly and precisely, optimizing capacity of machine.

Schunk    Morrisville, NC 27560
Jan 07, 2010 Available in 2 stroke length versions, PZB-plus 3-finger centric grippers include 6 sizes, from 64-200, fitted with multitooth guide. Devices feature central bore designed as sleeve that is equipped with female threads for add-ons and can be used to supply material or as ejector. Threads are integrated on upper face of gripper as well as on cover plate for mounting add-ons such as optional gripping force safety device, jaws, valves, and sensors.

Steinmeyer Inc.    Bedford, MA 01730
Jan 07, 2010 Single-axis PA 30x40-SM01 is fully enclosed stage measuring 30 mm wide and 40 mm high. It is available in travels from 25-150 mm and offers repeatability of 1 micron, maximum speed of 50 mm/sec, and load capacity of 100 N. Precision preloaded 8 mm dia Steinmeyer ball screw, miniature size 9 linear guideway, and noncontact limit switches are included in assembly. Product is available with either stepper motor or DC servo motor with encoder.

Daimer Industries Inc    Woburn, MA 01801
Jan 07, 2010 Capable of delivering pressures of 3,000 psi and water flows of 5 gpm, Super Max(TM) 12860 AST features Automatic Shut-Off Technology(TM) (AST®), which sends pumps and motors to sleep mode after 30 sec of downtime. Direct drive pumps support continuous use, while 60 Hz three-phase electric motors generate 10 hp. Washer can operate in cold or heated water or wet steam modes and can be configured to heat with heating oils, kerosene, or diesel.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 07, 2010 Made of C45 hardened steel with black oxide finish, RoHS compliant MN 140 series fastening clamps have maximum pressure of 10 bar and work pressure of 6 bar. Low-profile pneumatic clamps feature 2 arms, which exert outward force from center.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 07, 2010 Featuring 8,000 hr rated life, GE 23 W CFL Flat Lens PAR38 floodlight casts wide beam and offers color temperature of 2,700 K, color-rendering index of 82, and optimal lumen maintenance. It has hard-glass design and all-weather construction to withstand harsh conditions.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 07, 2010 UltraStart® T8 0-10V Programmed Start Dimming Electronic Ballasts support 100%-3% dimming in T8 linear fluorescent lamps. Other features include parallel lamp operation and under 700 ms start time. Products come in multi-volt 120-277 V 2-, 3-, 4-lamp H high ballast factor (1.18-.03 BF) for high-bay or high light applications and multi-volt 120-277 V 1-, 2-, 3-, 4-lamp N normal ballast factor (.88-.03 BF) for commercial/low bay applications.

Intersil Corporation    Milpitas, CA 95035
Jan 07, 2010 Operating from 4.5-19 V, Model 5421T contains 4 buffers, each exhibiting common mode input capability beyond supply rails and rail-to-rail output capability. Unit can be configured for single or dual supply operation, and typically consumes 500 µA per buffer. It has output short circuit capability of ±200 mA, continuous output current capability of ±70 mA, and slew rate of 12 V/µs. Housed in 10-lead MSOP package, Model 5421T operates over ambient temperature of -40 to +85°C.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 07, 2010 Available for accent and ambient lighting applications in retail/commercial settings, 20 W ConstantColor® CMH® GU6.5 lamp outputs 80 lm/W features 80+ CRI, and has 3,000 K temperature. Arc-tube technology and metal-halide chemistry provide rated life of 12,000 hr, and choice of 12°, 25°, and 40° beam angles are available. Exhibiting lamp-to-lamp color uniformity, product outputs warm, white light for color-critical applications and has GX10 base.