Thermo Fisher Scientific    Portsmouth, NH 03801
Jan 20, 2012 Consisting of open air and incubated bench-top models and incubated or refrigerated floor models, MaxQ® HP shakers provide hard shake for bacteria with speed range from 25-525 rpm. Brushless DC motors allow maintenance-free, 24/7 operation, and programmability includes function that restricts unauthorized/inadvertent changes to key functions. Temperature uniformity is ±0.3°C for incubated bench-top model and ±0.2°C for incubated and refrigerated floor models.

Totech Europe B.V.    Dronten 8253  Netherlands
Jan 20, 2012 Designed to exceed challenges associated with IPC J-STD-033B.1 for handling Moisture Sensitive Devices, XSD Series can dry PCBs without oxidation and inter-metallic growth induced by baking. Cabinets employ dual-wall, insulated steel and glass design and U5002 Dynamic Series closed loop dehumidification. Consuming less than 30 W/hr on average, cabinets deliver optimal humidity levels below 0.5% RH, vapor content less than 0.6 g/m³, and recovery time of less than 240 sec after door opening.

Macro Sensors    Pennsauken, NJ 08110 1334
Jan 20, 2012 Environmentally sealed to IP68 standard, rated to 185°F, and protected against dust ingress, Steel Mill Position Sensors monitor position of milling frames that support rollers during hot rolling process, ensuring frames do not deform or shift. Radial configuration with rod ends facilitates installation, while pre-calibrated on-board electronics eliminate need to configure signal conditioners. Available in ±0.015 to ±10.0 in. ranges, non-contact sensors provide 0-10 V, 4-20 mA, and ±10 V outputs.

Mitsubishi Heavy Industries America, Inc.    New York, NY 10111
Jan 20, 2012 Eliminating heat stress and strain in bonding process, Bond Meister MWB-12-ST produces 3D integrated LSI (large-scale integration) circuits at room temperature. Fast atom beam (FAB) gun irradiates atoms for activating material surface to bond, and up to 20 ton weight loading is applicable for bonding. In addition to being able to perform wafer transfer and alignment, machine accommodates setting of bonding conditions for individual wafers for production of various types in small lots.

AAEON Technology Inc    Taipei   Taiwan
Jan 20, 2012 Based on Intel® Atom(TM) D525 processor and Intel® ICH8M chipset, Model AEC-6612 Rev.B provides up to 6 USB 2.0 port, 6 COM ports, 1 power switch, 1 SYS LED, 1 HDD LED, and 1 CompactFlash(TM) slot. There are also 2 RJ-45 connectors for fast Gigabit Ethernet, Mini Card for expansion and storage, and 2.5 in. SATA HDD bay for applications in need of anti-shock and anti-vibration properties. For graphics support, AEC-6612 Rev.B has optional second VGA interface and optional extension kit.

Laser Devices, Inc.    Monterey, CA 93940
Jan 20, 2012 Designed to meet needs of Crew-Served Weapons operators, Model MK93 WAB is interoperable with all aiming lasers and lights compatible with MIL-STD-1913/Picatinny rails. Provisions for secure cable routing allow interference-free operation through entire range of motion with Objective Gunner's Protection Kit Armor Shield. Manufactured from carbon steel and aluminum alloy with MIL-SPEC CARC finish, WAB features 2-piece adjustable design for safe operation with MK19 machine gun.

Ema Design Automation    Rochester, NY 14623
Jan 20, 2012 Used to automate generation of complex PCB footprint models, FootprintGen fully supports user-defined and IPC-7351 standard settings across diverse component families. Rules, settings, and component dimensioning forms drive accurate parts building via consistent process. Multiple user settings are supported, with configurable line and text widths for various layers. Also, PCB footprint models can be verified and correlated to schematic symbol models to identify errors/discrepancies.

Intense    North Brunswick, NJ 08902
Jan 20, 2012 Available in 980, 830, 808, 785, and 780 nm wavelengths, 300 mW versions of Series 6030 and Series 6130 are based on Quantum Well Intermixing technology and operate from 25 to 50°C. Lasers are available in selection of free space packages, including 9 mm, C-mount, and 5.6 mm; PDM is optional. Multiple FAC lensing options and various standard beam divergences to match specific applications requirements are available. Areas of use include defense, medical, and print/imaging applications.

GOEPEL electronics LLC    Austin, TX 78759
Jan 20, 2012 Available within frame of SCANFLEX® JTAG/Boundary Scan hardware platform, PXI 1149/DAK is compatible with SCOUT interconnect system from MAC Panel. As option for SFX/PXI1149/Cx-FXT and SFX/PXIe1149/Cx-FXT controller, PXI 1149/DAK2 version has differential test bus with 200 pin receiver and single-ended PIP resources. For SFX/PXI1149/Cx and SFX/PXIe1149/Cx controller, PXI 1149/DAK1 model features single-ended test bus with 96 pin receiver as well as single-ended PIP resources.

Larson Electronics, LLC    Kemp, TX 75143
Jan 20, 2012 Constructed of extruded aluminum with unbreakable polycarbonate lens, 150 W Model LEDPM-5W-30 incorporates 30 Cree Xlamp XPG(TM) LEDs that deliver 14,790 lumen output. PWM circuitry protects against overheating and voltage spikes, and enables unit to automatically sense and adjust to input current levels, allowing operation with any current from 9-36 Vdc. Featuring 25° spotlight configuration, IP68-rated light has trunnion mount that allows adjustment through 360° of vertical movement.

Laser Devices, Inc.    Monterey, CA 93940
Jan 20, 2012 Rated at less than 5 mW, GREEN Ultra Power Point(TM) Laser Pointer improves range (225 m max) and visibility in daylight and at night and promotes accelerated target acquisition. Rated less than 0.7 mW, Class 1 Eye-Safe IR Laser Pointer is designed for users equipped with night vision devices. Both options are intended for use with AR-2A laser system, which mounts directly to A-Frame front sight of AR-15/M-4 style rifles without requiring any rails.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Jan 20, 2012 Providing permanent threads in thin panel sections down to .020 in., Atlas® MONEL® Type AEKM Inserts are suited for attachment applications where equipment or components are exposed to harsh conditions. Nickel-copper alloy 400 fasteners feature minimized profile head allowing for near-flush installations without special hole preparation. Available in thread sizes of No. 6-32 through 3/8-16 and M4-M10, inserts can be installed using spin-pull, pull-to-pressure, or spin-spin tools.

SOLTEC Corp.    San Fernando, CA 91340
Jan 20, 2012 Along with diverse recording modes, R300S thermal imager offer high sensitivity (NETD) of 0.025°C at 30°C, optimized averaging, and thermal movie recording to SD card in radiometric format (10 fps). It also supports thermal/visible integrated images in composite/split-screen display and features 3.1 MP visible camera and wired remote control unit. Olive color palette fosters identification of slight temperature differences, and 320 x 240 microbolometer detector is also standard.

Tri-Star Industries, Inc.    Berlin, CT 06037
Jan 20, 2012 Designed for molding into plastics, rubber, and ceramics, MC- and MT-Series feature diamond knurling that provides resistance to tensile pull and rotational torque loads to ensure maximum holding power. Closed-end bottom of MC-Series prevents plastic flow into threads, and MT-Series is suited for thru-thread mold-in applications. Manufactured from brass (Alloy 360), both series feature close tolerance ID for positioning accuracy on core pins during mold-in process.

CFR    Fort Worth, TX 76140
Jan 20, 2012 Providing contractor-grade deep cleaning, 10 gallon ECO-500 AW Series is suitable for use on carpets and upholstery as well as hard surfaces such as tile and grout. Portable unit features hinged tank design for access to internal components, front-mounted pressure gauge/adjustment knob to monitor cleaning performance, and front-mounted drain hose for solution disposal. Rear-mounted control panel and power outlets have sealed membrane switches.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 20, 2012 Supplied in 2512 case size, WSLP2512 SMT Power Metal Strip® resistor combines power capacity of 3 W with resistance values down to 0.0005 ohm. All-welded construction incorporates solid metal nickel-chrome or manganese-copper alloy resistive element with TCR of less than 20 PPM/°C. Able to be used over -65 to +170°C range without negative effects on power rating or electrical performance, resistor exhibits inductance of 0.5-5 µH and thermal EMF of less than 3 µV/°C.

Keyence Corporation of America    Itasca, IL 60143
Jan 20, 2012 Supporting simultaneous operation of up to 8 cameras, XG-8000 provides flexible hardware, diverse toolset, and intuitive interface. Triple Core Processor enables high load data processing, and visual LED indicators display received light intensities and image sharpness to facilitate setup. In addition to 3 control options, system offers KEYENCE Trace Log function; remote, online programming and editing; and data processing support for 5 MP area scan and 8K line scan cameras.

Larson Electronics, LLC    Kemp, TX 75143
Jan 20, 2012 Featuring vibration-resistant, 35 W HID bulb that outputs 3,200 lm with 4300K color temperature, Magnalight R-11 produces beam that reaches 3,000+ ft in standard spotlight configuration. Portable and waterproof unit, powered via Li-ion battery pack that provides 90 min of run time per charge, can connect to external 12-24 Vdc power source and comes with snap-on diffuser lens for converting to flood mode. Available R-11-IRF IR conversion lens lets users convert spotlight to IR output.

IXYS Semiconductor GmbH      Germany
Jan 20, 2012 Offered as integrated optical solution for I²C bus design, CPC5902 buffers bidirectional I²C clock and data ports while providing 3,750 Vrms of galvanic isolation. It supports Standard- and Fast-mode I²C up to 400 kbps, does not require any internal clocking, and supports direct static-state buffering without refresh clocks. Operating from 2.7-5.5 V, communications IC is designed for glitch-free operation and is certified to UL 1577 and EN/IEC 60950.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jan 20, 2012 Used to socket 16 x 16 x 0.8 mm BGA packages on any application board, SM-BGA-9006 operates at bandwidths up to 40 GHz with less than 1 dB insertion loss. It dissipates few watts with compression screw and can be customized up to 100 W with modified fin design on top of screw and adding axial flow fan. Constructed with elastomer contactor, socket features shoulder screw and swivel lid that incorporates quick insertion method to accelerate IC changeout.