Peddinghaus Corporation    Bradley, IL 60915
May 21, 2009 Employing plasma cutting and precise positioning technologies, Ring of Fire Thermal Processor can process all AISC structural shapes including beams, columns, angle iron, channel iron, HSS square and rectangular tubes, as well as plate and flat stock. System features self-contained dust collection and filtration system, and utilizes no oils or coolants. Capabilities include bolt hole generation, cut-off, surface bevels, weld prep, coping, and electronic marking.

ADLINK Technology Inc.    Irvine, CA 92618
May 21, 2009 Express-BASE Reference Carrier Board for Basic Form Factor Type 2 COM Express modules ATX form factor offers full compliment of I/O interfaces, debugging tools, and peripheral devices. With it, system designers can emulate functionality of desired end product with their chosen COM Express(TM) module and add-on cards to accelerate software development and hardware verification. Starter kit includes COM Express module, Express-BASE reference carrier board, thermal solution, and software library.

Bradley Corp.    Menomonee Falls, WI 53051
May 21, 2009 Keeping water, soap, and hand dryer within user's immediate reach, Advocate(TM) Lavatory System minimizes dripping water on floor and wasted paper towels. System includes water-conserving 0.38 gpm faucet and ndite® technology, which uses photovoltaic cells to store and use energy collected from restroom lighting to power sensors and valves. In addition to Terreon® solid surface, system comes in Terreon® RE, comprised of 25% pre-consumer recycled content and bio-based resin.

Logic Beach    La Mesa, CA 91942
May 21, 2009 IntelliLogger(TM) data logging and alarming instrument samples connected analog, digital, and Modbus inputs; processes them; and stores results to internal or CF Card memory for reporting over Internet and/or downloading. While logging, alarm conditions can be detected, and appropriate action - turning on integral output relay or emailing/texting alert message - can be initiated. Programmable solution also includes Web page server for remote monitoring/management.

SIXNET    Clifton Park, NY 12065 0767
May 21, 2009 R.A.M.(Remote Access and Monitoring) unit allows data logging and SCADA operations to be monitored/controlled from remote locations anywhere via existing cellular networks. It provides secure cellular data connectivity, programmable RTU functionality, and includes Open Source Linux OS along with application tools for alarming, data logging, and programmable control. With 26 I/O points and 5 Ethernet, 1 RS485, and 2 RS232 ports, it operates on 120-240 Vac in temperatures from -40 to +65ºC.

Quality Strapping, Inc.    Brooklyn, NY 11206
May 21, 2009 Unaffected by weather and UV rays, QualiStrap plastic polypropylene strapping comes in standard pallet quantities of 24, 28, 32, or 36 cartons per skid for extreme and rigid quality control in machine-grade applications. Product meets packaging industry requirements with machine grades available in job-matched widths (5 mm to ½ in), thickness, and tensile strengths. Polyester PET strapping is also available for additional strength.

SICK, Inc.    Minneapolis, MN 55438
May 21, 2009 Suited for small- to medium-sized machines, FX3 Flexi Soft Modular Safety Controller expands module by module with 12-144 I/O. Unit offers fast shut-off, enhanced functional interface, and variety of network communications, including EtherNet/IP, PROFIBUS-DP, PROFINET, CANopen, Ethernet TCP/IP, and Modbus TCP. Hardware and software configuration is done via Flexi Soft Designer, which consists of function block-based logic editor using drag-and-drop.

Cotronics Corp.    Brooklyn, NY 11232
May 21, 2009 Offering alternative to silver-filled, electrically conductive epoxies, nickel-filled Duralco 122 cures at room temperature in 16-24 hr at 75°F or can be fast cured in 10 min at 200°F. Resistant to moisture, chemicals, and solvents, 2-part epoxy bonds well to glass, ceramics, plastics, dissimilar materials, and metals, including steel, stainless, aluminum, and lead. It is suited for flexible circuits, semiconductors, EMI shielding, thermistors, wire tacking, and heating elements.

Misumi USA    Schaumburg, IL 60173
May 21, 2009 Designed for compression springs, Standard Type Washers come in 1045 carbon steel with black oxide finish, 304 SS, and 4 resin types, which provide insulation while minimizing weight of components. Offered in flat and knurled styles, Tapped Type Washers come in 1045 carbon steel with black oxide finish and 304 SS. Threaded I.D. facilitates adjustment to initial load. Both types feature extended collar design, which minimizes distortion during expansion and contraction.

Grieve Corporation, The    Round Lake, IL 60073-2898
May 21, 2009 Utilizing 80 kW Incoloy-sheathed tubular elements to heat two 34 x 54 x 72 in. workspaces, 500°F No. 1010 includes 10,000 cfm, 7½ hp recirculating blower, which provides horizontal airflow to common central duct system. Electrically heated oven has 4 in. thick insulated walls, Type 304 stainless steel interior with continuously backwelded seams, stainless steel exterior with No. 4 brushed finish, and 24 x 24 x 6 in. thick HEPA fresh air filter with 2 in. prefilter.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 21, 2009 With DW-USB Series, users can monitor temperature, humidity, dew point, voltage, current, or carbon monoxide almost anywhere. Sampling rate, start time, high/low alarm settings, and temperature unit parameters can be selected with Windows®-based application. Stored data is downloaded by plugging module into PC's USB port, while alarm status and low battery is indicated via flashing LEDs. When protective cap is fitted, loggers resist moisture to IP67 standards.

Beijer Electronics, Inc.    Schaumburg, IL 60173
May 21, 2009 Requiring no specific experience, PFD (Programming-Free Display) software and hardware platforms facilitate design of UIs for embedded systems. PFD-Designer software eliminates need for LCD interface programming by allowing designers to edit graphic objects and set addresses simultaneously. PFD hardware integrates TFT LCD touch panel, dual port RAM, and related I/O. It can upgrade any existing LCD module without changing existing hardware and supports displays from 5.7-10.4 in.

Dynalab Corp.    Rochester, NY 14623
May 21, 2009 Made of translucent polypropylene in squat format, 4 Liter Cylinder features 50 mL increments with 500 mL graduation lines printed around circumference. Unit is less than 24 in. in height with 8 in. diameter octagonal base that unscrews from cylinder for cleaning and storage. Compliant with ISO 6706 and US FDA 21 CFR 177.1520 for use with Food and Beverage, autoclavable cylinder is suited for measuring large volumes, mixing, and making up solutions and buffers.

GAO Tek Inc.    Toronto M1B2K4  Canada
May 21, 2009 Utilizing DSP technologies, portable GAO8821 DVB spectrum analyzer is suited for use in telecommunications, broadcasting, and CATV and EMC testing applications indoors and outdoors. It comes with TFT LCD that offers 2 windows to scan spectrum and display signals on screen simultaneously. Device includes functions such as CCTV analysis, professional digital analysis, and supports constellation diagram of 16/32/64/128/256QAM/QPSK modulation type.

SGS SA    Geneva   Switzerland
May 21, 2009 Developed from techniques used in caving, Industrial Rope Access is suited for testing and inspection of structures, structural surveys, and for conventional and advanced Non-Destructive Testing. Service solves difficult access problems, without using scaffolding, cradles, or mobile elevated work platforms and minimizes disruption at ground level, allowing work to continue during inspection. Target industries include energy, oil and gas, or industrial manufacturing sectors.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 21, 2009 Allowing access to fiber optic ports A and B from Fast Ethernet RJ45 port, QuickSwitch® Models 4183 and 4173 have switch positions controlled via front-panel pushbutton or remotely from RS-232 (DB9) serial port. Pushbutton control eliminates need to plug and unplug fiber optic patchcords. Units offer 1,300 nm, ST Duplex, Multimode, 100 Base FX fiber optic ports. Available with MIL type power connector and mating cable, Model 4173 is ruggedized-for-vibration.

Cooper Lighting    Peachtree City, GA 30269
May 21, 2009 Fail-Safe Changing Views visual therapy luminaires are available as recessed fluorescent (standard), sealed, recessed fluorescent (clean room rated) and LED recessed and wall models, and feature photographic images from Joey Fischer, nature photographer and Smithsonian Award Recipient. They come in configurations ranging from 2 x 2 ft to 4 x 12 ft to create life-like murals. Series can be used in single or multiple units to create small or large scale murals.

Cree, Inc.    Durham, NC 27703
May 21, 2009 Utilizing Cree TrueWhite(TM) technology, LRP-38 LED lamp generates CRI of 92 at color temperature of 2,700 K. Focused beam delivers center beam candlepower of 4,000 with beam angle of 20 degrees. Product is designed to last 50,000 hr in open track fixtures or 35,000 hr in non-IC commercial recessed downlights. Suitable applications include supermarket produce displays, department stores, and museums.

Ridgid Products    Orange, VA 22960
May 21, 2009 Featuring ergonomic X-CEL® knob, RIDGID® Model 65S Stainless Steel Quick-Acting tubing cutter cuts to SS and metallic tubes such as steel, zinc, copper and aluminum. Spare wheel stored in knob, allows X-CEL® wheel pin for quick wheel changes with no tools required. With adjustable dia tubing from ¼ to 2 5/8 in., unit can cut tubing with wall thickness of up to 1/8 in.

Strippit Inc.    Akron, NY 14001-1321
May 21, 2009 Fully integrated and programmable Axel 4020 laser cutting system provides continuous, uninterrupted dynamic laser processing of sheets up to 157 x 78 in. with automated material handling. It can handle up to 1,000 kg of sheets, while loading and unloading function is performed independently with plate to plate change time of just 29 sec. It allows processing of thin material at speeds up to 1,574 in./min and thick material up to 1 in. mild steel.