Lemnis Lighting Inc.    San Francisco, CA 94107
May 27, 2009 Offering warm and soft glow up to 3,000 K, 60 W Pharox 6W LED bulb closely resembles traditional incandescent bulb and fit residential and office fixtures. With up to 300 lumen light output and absence of mercury, Pharox 6W are made from recyclable materials and may be recycled.

Phoenix Technologies Ltd.    Milpitas, CA 95035
May 27, 2009 Phoenix Freeze(TM) pairs Bluetooth® mobile phone with user's laptop so that laptop immediately engages Windows XP/Vista lock whenever user walks away with phone and then automatically unlocks when user returns within pre-defined proximity. For maximum power settings, laptop can be configured to enter sleep mode as user exits proximity lock range. To wake system, user would need to press resume button.

Raytek Corporation    Santa Cruz, CA 95061 1820
May 27, 2009 Able to measure temperatures ranging from -20 to 500°C, Raytek CM is protected by rugged IP65 (NEMA-4) SS housing, allowing sensor to function in ambient temperatures to 70°C without cooling. Features include high-resolution silicon optics and RS232 digital interface that allows user to configure programmable sensor variables via DataTemp® Multidrop software. These include 24 Vdc alarm output; peak hold, valley hold, or variable averaging signal processing; among others.

Linear Technology Corp.    Milpitas, CA 95035
May 27, 2009 With input operating voltage from 2.9-40 V, LT3757 suits boost, flyback, SEPIC, and inverting power supply applications. It has 2 voltage feedback error amplifiers and reference voltages; one set for positive output with 1.60 V reference voltage, and other for negative output with -0.80 V reference voltage, both off single feedback pin. Unit features programmable fixed or synchronizable operating frequency from 100 kHz to 1 MHz, and is offered in thermally enhanced MSOP-10 and DFN-10 packages.

Tridium, Inc.    Richmond, VA 23233
May 27, 2009 Combining integrated control, supervision, data logging, alarm scheduling, and network management functions, JACE-202-XPR allows for managing and controlling energy applications that make buildings more energy efficient. It has integrated I/O and optional GPRS modem connectivity with Internet connectivity and Web serving capabilities. Applications include large scale, high density residential buildings, multi-use residential/commercial villages, and multiple retail/restaurant chains.

Gao Tek    Toronto M1B2K4  Canada
May 26, 2009 Designed to extend basic features of NXP MCU, which has ARM-based core, LPCEB2000-A processor board delivers flexibility to drive demanding applications. It is based on 16-/32-bit ARM7TDMI-S MCU operating at up to 60 MHz and can be mounted directly on top of expansion board to form complete hardware system. Processor board accommodates embedded peripherals and has extensible pin-headers on edge. Features include on-chip battery, power status indicator LED, and 10 MHz crystal for CPU.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 26, 2009 Designed for measurement/control of strain gage transducer-based systems, Model 4215 has 2 independent lines of 20-character display for simultaneous channel viewing. Platform combines force channels, encoder position channels, print capabilities, and RS-232/485 communications. Along with standard front panel shunt calibration with 2 selectable resistors, features include bipolar range ±999,999 display with 24-bit resolution, TEDS-Tag Auto Load Cell ID, and setup for 25 load cells.

ADMEcell, Inc.    Emeryville, CA 94608
May 26, 2009 Suited for in-vitro intestinal absorption evaluation, CacoReady(TM) System minimizes time for preclinical screening of oral compounds. Integrated tool is used to assess permeability and can be adopted for high-throughput screening of compounds. Shipped at room temperature in proprietary shipping medium on day 15 of differentiation, system comes with Caco-2 cells plated on 24 and/or 96 transwell plates.

Bobcat Company    West Fargo, ND 58078
May 26, 2009 Respectively weighing 3.2 and 3.5 metric tons, E32 Conventional Tail Swing excavator and E35 Zero Tail Swing excavator employ load-sensing piston pump and closed center-valve system for smooth control of machine functions. Both M-Series models use X-frame undercarriage for optimal ground clearance and shedding of debris. Auto-Shift travel and Auto-Idle features are standard, as is integrated slew brake and 33.3 hp engine. Dig depth is 10 ft 2 in., and dump height is 11 ft 3 in.

COMMELL    Taipei Hsien   Taiwan
May 26, 2009 Based on 1.6 GHz N270 processor with 533 MHz FSB, HE-875P PISA-bus Half-size CPU Card consists of Intel 82945GSE Graphic Memory Controller Hub and Intel I/O Controller Hub 7-M. Unit features 32-bit 3D graphics core based on Intel GMA 950 architecture, and supports DDR2 SO-DIMM up to 2 GB. Networking is provided by 2 Intel 82574L Giga LAN, 6 x USB2.0 ports, AC97 audio, 2 x SATA interface with 150 MB/s transfer rate, IDE and CompactFlash socket.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
May 26, 2009 To minimize drift over time and temperature, 50 MHz MCP65X Series includes mCal on-chip, one-shot calibration circuit that calibrates offset voltage at power-up using internal power on-reset detector, or based upon state of external pin. Units feature rail-to-rail output with output drive current of 95 mA. Housed in 8-pin SOIC, 3 x 3 mm DFN, or 10-pin MSOP package, op amps are suited for microphone preamplifiers, H-bridge drivers, barcode scanners, and ultrasound equipment.

Hobart Brothers Co.    Troy, OH 45373-2900
May 26, 2009 Designed for welding high-strength, low-alloy (HSLA) steels such as A514 (T-1), HY-80, and HY-100, Tri-Mark® Metalloy® 110 gas-shielded metal-cored wire offers tensile strength up to 128,000 psi and yield strengths up to 115,700 psi. It meets requirements of AWS classification E110C-K4 and creates welds virtually free of spatter and silicon islands. Properties include optimized wetting action and penetration characteristics as well as ability to bridge part gaps without burn-through.

Rockwell Automation    Milwaukee, WI 53204
May 26, 2009 FactoryTalk AssetCentre v2.31 includes process device configuration, using Field Device Tool (FDT) technology, to help manufacturers in process industries centrally manage and maintain their production environments. Engineering staff can remotely connect and conduct instrument diagnostics, view/edit device configurations, and swap out/reconfigure devices with last-known good configuration. Additionally, calibration management capabilities and disaster recovery support are included.

Fluid Research Corp.    Tustin, CA 92780
May 26, 2009 Suited for use with container emptying devices, FRClean(TM) cleans drum/pail systems completely and eliminates previously associated disassembly, reassembly, and wait times. After continuous contact with medium, contaminated plate is inserted into cleaning drum equipped with nozzles and cleaned within 20-40 min. By fitting hose reel to cleaning drum supply station, system may also be used for external cleaning of equipment/production areas.

Red Lion Controls    York, PA 17402 9428
May 26, 2009 Equipped with protective window for optimal readability and durability in indoor/outdoor applications, modular CUB5 Series includes programmable models able to measure DC current and voltage, process meter and sensor signals, and accept inputs from thermocouple and RTD sensors. Each model comes in 1.54 x 2.95 in. housing with 8-digit, 0.46 in. LCD and NEMA 4X/IP65 sealed front bezel. Dual counter or counter/rate indicator capabilities are available.

Express Assembly Products, LLC    Amherst, NH 03031
May 26, 2009 Featuring ergonomically designed grip made of thermoplastic elastomeric with non-slip top wave design, CP Series Auto Shut-off Air Screwdriver is provided with color torque cover system that protects toque setting and allows for quick operator recognition. CP inline screwdrivers are available in torque ranges from .5-150 lb-in. with rpm ranges from 300-1,000.

MICRO-EPSILON AMERICA    Raleigh, NC 27617
May 26, 2009 Suited for applications requiring small measuring range but high performance, optoNCDT 1402 series features Teach-In function that is used to limit or change measuring range for each application. Sensors include RS422 digital interface, analog current/voltage output, and integrated swiveling cable connector, which can be used to change direction of cable output to suit individual applications. Series consists of 7 sensors with measuring ranges between 5 and 250 mm.

Munson Machinery Co., Inc.    Utica, NY 13503
May 26, 2009 Suited for 3-A and USDA applications, Model 700-TH-5-SS blends batches from 0.25-5 ft³ in parts as small as one per million with complete uniformity in less than 3 min, evacuates batch with no residual, and can be sanitized rapidly with no tools. Stainless steel, sanitary unit features stationary inlet and outlet for inline operation, and rotating drum with mixing flights that tumble, turn, and fold material gently. Batch weight capacity is 500 lb.

Capital Safety    Red Wing, MN 55066-5005
May 26, 2009 ExoFit(TM) Wind Energy Harness has protective hip pad to prevent wear from repetitive motion as well as built-in tool loops to hold equipment during climb. Features include quick-connect buckles, front D-ring for climbing or controlled descent, side D-rings for positioning, and dorsal D-ring for fall arrest. Featuring twin legs for 100% tie off, Force2(TM) Wind Energy Lanyard protects workers up to 310 lb from 12 ft free falls. It is available either as polyester rope or elastic polyester webbing.

Phoenix Contact    Harrisburg, PA 17111 0100
May 26, 2009 Series UT 4-PE terminal blocks offer termination for grounding shields used in shielded twisted-pair wires for analog and digital sensors. Integrated PE foot is available in 6.2 mm versions of UT 4 knife disconnect, diode and fuse terminal blocks. Blocks provide options to disconnect or use universal lever-style fuse holder for 5 x 20 plugs with or without light indication. Compact design with uniform dual-bridge channel delivers power distribution with FBS push-in jumpers.