Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Feb 01, 2010 Operating from 4.5-18 V supply voltage, SWIFT(TM) PMIC Model TPS54290 supports output voltages as low as 0.8 V with 90% power efficiency. Dual-output 1.5/2.5 A unit is set at fixed frequency of 300 kHz. Two other family members, Models TPS54291 and TPS54292, provide switching frequencies of 600 kHz and 1.2 MHz. Featuring current mode control and 180° out-of-phase operation, Model TPS54290 is suited for consumer electronics such as set top boxes and digital TVs.

Oberon, Inc    State College, PA 16801
Feb 01, 2010 Designed for Model 1052-00 enclosure, Model 38-1052-ADPDOOR-1140 allows replacement of Cisco 1240 access point with Cisco 1140 access point. Field replaceable door incorporates locking mechanism for Cisco 1140, which is secured in same location using same key. Model 1052-00 remains in place, allowing for cable management and termination.

Doall Sawing Products    Des Plaines, IL 60016
Feb 01, 2010 Providing tramp oil rejection and control of bacteria and mold, semi-synthetic Kool-ALL Ultra® extends sump life. Power-Cut Ultra® soluble oil has emulsifiers that mix with water and can handle alloy steels such as 300 series stainless steel. Featuring low foaming tendency, Synthetic Kleen-Kool Ultra® optimizes fines release and hard water tolerance, minimizing grinding swarf and maintaining unclogged grinding wheel. All use recyclable containers and liners that are tamper-resistant.

QuadTech, Inc.    Maynard, MA 01754
Feb 01, 2010 With Hybrid 2000 4-Wire, companies can test multiple components and automate sub-testing. DCR Balance feature compares resistance within test and compares each point to one another. If failure occurs during multi-point test, Hybrid 2000 uses sub-step feature to automatically re-test each point individually and determine where failure is. Optional temperature compensation eliminates manual recording and testing of multiple limits due to temperature dependency.

RADIALL Inc    Chandler, AZ 85226
Feb 01, 2010 Adding 20 variations of plugs, jacks, and receptacles, N and 7/16 Composite Connector Series products are manufactured with corrosion-free, composite materials that are UV-resistant and meet IEC 68-2-5 and IEC-68-2-9. Units feature single-piece design that permits contact pressure to be equally distributed by diverting tightening torque force through pressure on ground contact junction. Designed for various telecommunications equipment, connectors offer multiple termination possibilities.

Blumberg Excelsior, Inc.    New York, NY 10013
Feb 01, 2010 Law Firm Technical Care(TM) offers suite of hardware and software technical support and online security services for solo practitioners and small law firms. Monthly subscription grants 3 hr of secure remote installation, diagnostic, and repair services for hardware, while software support covers installation, set-up, configuration, and troubleshooting. Additionally, service offers secure backup, storage, and recovery of up to 5 GB of data as well as teleconferencing services.

Bell & Gossett    Morton Grove, IL 60053
Feb 01, 2010 Energy efficient ecocirc®e3 series recirculating pumps feature Electronically Commutated Motor with spherical motor design, replacing conventional components such as shaft, seal, and bearing assembly. Rotor/impeller is only moving part and is magnetically balanced on stationary ceramic bearing inside pump housing, providing silent operation. Pump is also available with timer module to convert it into timer-controlled unit.

FIKE Corporation    Blue Springs, MO 64015 4263
Feb 01, 2010 Explosion Isolation Pinch Valve (EIPV) prevents deflagration propagation through interconnecting pipes or conveying lines, thus protecting additional process equipment and/or operating locations. CE and ATEX tested and certified product can be mounted either vertically or horizontally, can be reset by users, and is virtually maintenance free. Valve has heavy duty cast valve body and rugged elastomeric sleeve.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Respectively intended for handling 3.2, 6.3, and 12.5 ton loads, DR 3, 5, and 10 universal foot-mounted hoists can be adapted to meet application requirements. Attachment points enable suspension in 4 mounting positions to ensure free rope lead-off in all directions. Load bar operation can also be implemented using 2 synchronized ropes. Depending on model, hoists offer 15 or 20 m hook path and 8-12.5 m/min hoist speed.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Demag FDR 20 foot-mounted hoist, The Workhorse, features reeving components fitted to unit, with 2/1, 4/1, or 4/2 reeving arrangements depending on application. Compact device supports flexible mounting arrangements due to multiple connection options and has 1 rope guide for all rope lead-off variations. It includes modular electrical equipment, lubricated gearbox, and low-vibration motor. Controlled via cable connection or by radio, hoist also includes overload protection.

Demag Cranes & Components Corp.    Oakville, ON L6M3E3
Jan 29, 2010 Optimized for crane applications, EKDR Rope Hoist is equipped with fast acting brake, lubricated-for-life gearbox, protective rope guide, and precision geared limit switch. Electrics feature CAN bus technology, while frequency inverter enables stepless travel motions. Double-rail crab and foot hoist additionally includes overload protection, user-friendly bottom block, and ergonomic controls.

CGM Applied Security Technologies Inc.    NJ, NJ 07727
Jan 29, 2010 High-security C-30P pull-tight cable seals feature cable constructed of aircraft-quality steel and wire configuration that will bloom outward once cut, preventing reinsertion of cable back into barrel. Products have tail length of 14 in. and tail thickness of 1/8 in., and seal body is constructed of hard plastic wrapped over steel core. All units are sequentially numbered or barcoded, with numbers, codes, or text laser-etched into surface.

Allentown, Inc.    Allentown, NJ 08501
Jan 29, 2010 EcoFlo Family of Blowers are available in rack-, wall, or ceiling-mounted as well as in free-standing tower configurations. They provide temperature and humidity monitoring of supply and exhaust as well as cage or rack pressure polarity monitoring. Controlled via icon-based, real-time touchscreen, units incorporate visual indicators for filter/blower alarms, filter loading percentage indicator, and programmable pin code security. They are also Wi-Fi(TM)/Bluetooth(TM) wireless capable.

CGM Applied Security Technologies Inc.    NJ, NJ 07727
Jan 29, 2010 Secure TRAC Tri-PACK provides 3 different color rolls - one each of red, green, and blue - of 60 ft Secure TRAC tamper-evident tape. Adhesive solution offers standard security feature of sequential numbering every 9 in. as well as OPENED message that appears when removed from substrate to provide proof of being opened.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Jan 29, 2010 Model 3092C piezoelectric charge output accelerometer is designed for use in vibration studies in high-temperature environments. Operating in temperatures from -60 to +900°F, unit has nominal sensitivity of 5 pC/g and upper frequency range of 5,000 Hz. It features 10-32 radial connector, 10-32 mounting hole, stainless steel construction, and hermetic seal and mates with Model 6894AXX hardline cable assembly.

Eurotech Group    AMARO (Udine) 33020  Italy
Jan 29, 2010 Rugged ISIS ICE offers fanless operation using low power Intel Atom based ISIS SBC. Offering wireless communications, GPS options, and flexible PC/104 I/O and communications expansion, ISIS ICE is suited for asset monitoring and control, access control, communications gateway, and in-vehicle control applications. PROTEUS ICE is Atom based fanless system offering flexible wireless communications capabilities. It is suited for infotainment, interactive kiosks, and industrial and medical control.

FleetwoodGoldcoWyard    Romeoville, IL 60446
Jan 29, 2010 Modular and configurable to suit different layouts, Robotic Tray System (RTS) provides buffering and accumulation system within can end manufacturing processes. It can run trays from existing balancer systems, and optional servo belt drives eliminate air usage by replacing pneumatic cylinders. Acting as one unit, system is comprised of 4 separate systems: infeed lanes, robot end-of-arm tooling, discharge lanes with shuttle, and discharge conveyors.

California Micro Devices    Milpitas, CA 95035
Jan 29, 2010 Offered in die form, LuxGuard(TM) CM1753/CM1754 can be integrated into existing or new high-brightness LED (HBLED) lamp modules to provide ESD protection and thermal management. Both specifically feature 50 V breakdown voltage and deliver 8 kV HBM (Human Body Model) of ESD protection. Offered as silicon-based, side-mount ESD protectors, CM1753 is designed for P-up common cathode configurations and CM1754 provides identical protection for N-up common anode configurations.

Xspect Solutions Inc.    Wixom, MI 48393
Jan 29, 2010 By performing contactless 3D measurement of internal and external part surfaces, exaCT® allows non-destructive inspection of small and medium sized complex parts with small features manufactured from plastics, composites, ceramics, aluminum, or magnesium. Integrated system includes CT scanning machine with image detectors, 2 monitors, and computer. Also included, master system software enables acquisition of projections and reconstruction for evaluation of generated 3D data.

Crydom    San Diego, CA 92154
Jan 29, 2010 Designed for harsh environments and available with AC or DC input control voltages, Crydom 53 Series of 3-Phase SSR Contactors includes models featuring IP20 touch safe covers with load current ratings of 25 or 50 A/channel at 530 Vac. Series also includes 3-Phase solid state motor reversing relays rated at 25 or 50 A/channel. Available with 3-32 Vdc input control, reversing versions include safety control interlock circuit, which prevents simultaneous forward and reversing commands.