Fairchild Semiconductor    San Jose, CA 95134
Jan 28, 2010 Supplied in 1 x 1-4 mm WL-CSP, IntelliMAX(TM) FPF110x series integrates analog switch control functionality and offers 35 mW RON typ. It allows direct load switch interconnection into most MPUs for software-transparent operations. Based on power CMOS silicon, series eliminates need for additional input capacitors and offers protection through integrated slew rate control. Slew rate options of 65 and 130 µsec meet system demands while promoting stability over 1.2-4 V operating range.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jan 27, 2010 Supplied in QFN-16 package, ADS8201 simplifies compact, power-sensitive, and multi-sensor-based portable designs. Complete on-chip system, rated to 100 kSPS, draws 600 µA supply current at 2.2 V and offers system processing capability by integrating complete analog signal chain of 4 chips into one. In addition to 8-deep FIFO that permits flexible data reading, IC offers single-ended and differential-ended inputs that support various interface options.

Anritsu Co.    Richardson, TX 75081
Jan 27, 2010 Built on Open Windows architecture, MS4640A Series microwave Vector Network Analyzer (VNA) is used for characterizing devices, optimizing designs, and maximizing throughput. If offers broad frequency span from single coaxial test port, covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in Broadband configuration. VNA can achieve synthesized sweeps at 20 µsec/point, offers greater than 80 dB sensitivity, and has 100 dB dynamic range at 70 GHz.

Otter Products, LLC    Fort Collins, CO 80524
Jan 27, 2010 Offered as custom case used to protect myTouch(TM) 3G from T-Mobile®, Commuter(TM) Series has custom-molded polycarbonate shell that measures 4.61 x 2.37 x 0.83 in. Silicone mid-layer is exposed at corners to absorb bumps and shock, while self-adhering, clear screen film prevents scratches to touchscreen. All phone buttons and features remain fully functional, and silicone plugs facilitate access to phone's ports while keeping out dust and dirt.

2L inc.    Hudson, MA 01749
Jan 27, 2010 Used for direct part marking, PRO 3 CAD/CAM Engraving Software Program creates G-code programs for producing 2D Data Matrix Barcodes with existing 2L engraving tools and 3- or 4-axis CNC milling machines or multi-axis lathes. G-code NC files are compatible with virtually any CNC controller, and program allows creation of precise engraving layouts using multiple fonts, drawn shapes, lines, and incremental serial numbers along with 2D Data Matrix Barcodes.

ALMSCO International    Llantrisant CF72 8XL  United Kingdom
Jan 27, 2010 Unlike conventional technology, BenchTOF-dx(TM) compact reflectron time-of-flight instrument generates truly classical electron impact ionization spectra for gas chromatography and GCxGC applications. Platform-neutral device offers selectable spectral acquisition rate exceeding 500 spectra/sec, integrates into mass spectrometry data analysis platforms, and interfaces with most GC systems. Unit is accompanied by target search software incorporating deconvolution and chemometric analysis.

Arbor Technology Corp.      Taiwan
Jan 27, 2010 Suited for harsh environments, Robust Box PCs, models FPC-3100, FPC-3101, and FPC-3120 feature low-power CPU, fanless design, and aluminum case designed with fins for effective heat dissipation. They tolerate vibration to 3 G, shock to 80 G, and crash forces up to 100 G. Modular units include 1 GB DDRII-533 memory; 2.5 in. HDD, SSD, or 4 GB NANDrive; as well as 2 GbE ports, 6 USB 2.0 ports, 3 serial ports, and Mini-card slot. They can be wall-, VESA-, or DIN-rail-mounted.

McPherson, Inc.    Chelmsford, MA 01824
Jan 27, 2010 Equipped with cooled, scientific-grade CCD detectors, Model 234/302 enables users to measure vacuum ultraviolet spectral emission in experiments such as plasma process mapping, fluorescence, luminescence, and VUV photoemission. Spectrometer has adjustable slits, and operates at f/4.5, providing sensitive data collection from UV radiation and emission spectra in 100-190 nm wavelength range simultaneously, in near real time, with sub-nanometer spectral resolution.

Ormec Systems Corp.    Rochester, NY 14625
Jan 27, 2010 Allowing users to specify motion control parameters, XD-Series Indexer Servo Drives also enable individual motion profiles to be mapped to I/O points, with 1 or 2 functions/point, initiated via Modbus/TCP, and chained or looped together. Adaptable I/O includes 14 inputs and 8 outputs. Communication setup is accomplished via USB or Ethernet, while included software offers load-and-go application templates to simplify motor setup. Devices are available with 115, 230, and 460 Vac input power.

CAS Data Loggers    Chesterland, OH 44026
Jan 27, 2010 With support for SDI-12 sensor networks, dataTaker DT82E measures temperature, voltage, current, 4-20 mA loops, resistance, bridges, strain gauges, frequency, digital, and serial devices. Dual channel isolation allows four 2-wire differential or 6 common referenced analog inputs to be used in many combinations. Featuring built-in display and 18-bit resolution, logger can store up to 10 million data points. Communications features include RS232 with modem support, Ethernet, and USB ports.

Stewart Connector    Glen Rock, PA 17327
Jan 27, 2010 Designed to promote optimal port density in space-constrained telecom and premise wiring applications, MRJ21® Cable Assemblies simultaneously support VoIP, PoE, and GbE while offering ability to connect 24 twisted pairs with one connection. Category 5e devices offer choice of straight, 45° angle, or multiple RJ45 connectors. Board-mount receptacle features board lock design for PCB strain relief, while cable assemblies provide offset jackscrews to ensure positive latching.

Spectra-Physics, Inc.    Mountain View, CA 94043
Jan 27, 2010 With short pulse width of less than 23 ns, Pulseo 355-10 Q-Switched DPSS Laser provides 10 W of 355 nm output at 90 kHz. Unit offers field-replaceable key components such as diodes, fiber, and output window. Applications include crystalline silicon photovoltaic solar cell manufacturing processes such as wafer scribing and dicing, drilling, and marking. Laser is also suited for microelectronics applications, such as via hole drilling, flex circuit cutting, and flat panel manufacturing.

Kollmorgen Corp.    Radford, VA 24141
Jan 27, 2010 By simulating machine's operation before connecting components, Kollmorgen Automation Suite(TM) helps OEMs move from concept to completed machine. Design engineers use software to program and refine most automated functions, including line shafting, gearing, and camming. Suite is also used to incorporate components, including software, controls, HMI, I/O, drives, and motors. By replacing complex coding with drag-and-drop functionality, software facilitates programming multi-axis synchronized motion.

Barton Mines Co., LLC    Glens Falls, NY 12801
Jan 27, 2010 Available for waterjet industry, BART (Barton Abrasive Removal Tool) addresses shortcomings of traditional methods of waste garnet removal. Portable unit, powered by common pressure washer, offers waste abrasive removal rates in excess of 2,000 lb/hr. Able to be used on multiple machines, stainless steel wand fits between table slats and can be operated while waterjet is running. It removes spent media in timely and efficient manner, eliminating exhaustive shoveling and downtime.

Energetiq Technology    Woburn, MA 01801
Jan 27, 2010 Able to provide brightness from 170 nm through visible and beyond, EQ-99 Laser-Driven Light Source (LDLS(TM)) meets needs of next-generation HPLC, advanced microscopy, as well as other demanding imaging and spectroscopy applications. Spatial and power stability enable repeatable measurements over extended periods of operation, and laser-driven bulb technology optimizes lamp life. Singular solution offers alternative to using multiple lamps that only cover portion of spectrum.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jan 27, 2010 With sensing range of 600 mm, DK50-UV Luminescence Sensors provide means of error checking, sorting, measuring, and positioning materials that blend into background or are invisible. Small focal point of light spot means that even small parts such as O-rings and pin-point leaks can be detected down to 2.2 mm diameter targets. Offering 4 automatic teach modes, sensors include output mode toggle, integral timer, and 8-segment LED display that indicates luminescent signal strength.

Kollmorgen Corp.    Radford, VA 24141
Jan 27, 2010 Ethernet-based and scalable, Advanced Kollmorgen Drive(TM) lets machine builders standardize on single drive family with common GUI across power range to deliver optimal performance, throughput, and accuracy. Solution is available for 120/240 or 480 Vac operation, with power range of 3-24 Arms continuous current and 9-48 Arms peak. In addition to providing complete machine automation solution, product supports various feedback devices and Ethernet Motion buses without separate option cards.

Newport Corp.    Irvine, CA 92606
Jan 27, 2010 Designed for 800 nm femtosecond lasers, SCG-800-CARS (coherent anti-stokes raman scattering) optimized supercontinuum generation fiber device contains 12 cm, highly nonlinear photonic crystal fiber with zero dispersion points at 775 and 945 nm. Two zero-dispersion wavelengths enable stable, low-noise supercontinuum generation that also allows control of spectral shape by tuning pump wavelength. Nonlinear supercontinuum fiber is mounted in 25 mm dia x 120 mm long aluminum housing.

AXIOMTEK    Taipei   Taiwan
Jan 27, 2010 Powered by 2.33 GHz Intel® Core(TM)2 Duo processor with Intel® 945GME and ICH7M chipsets, E-Mark certified eBOX310-830-FL includes 200-pin DIMM socket that supports up to 2 GB DDR2 400/533 DRAM. Fanless system has 2.5 in. SATA drive bay, CompactFlash(TM) Type-II socket, 3 COM ports, 2 USB 2.0, and 2 Gigabit LANs. Measuring 224 x 250 x 65 mm, computer supports 9-36 DC power input and includes intelligent power ignition function that turns unit on/off when vehicle is turned on/off.

Advanced Composites Group    Tulsa, OK 74134
Jan 27, 2010 Compatible with LTM® epoxy and HTM® Bismaleimide prepregs, Model CB1100 ceramic tooling block can produce thermally stable composite tooling tolerant of high pressures and elevated temperatures associated with autoclave cure cycles. High-grade product features low coefficient of thermal expansion; does not absorb water, eliminating need for drying or venting of tool; and is incombustible. It is suited for production of high-accuracy, short run, and prototype tooling.