Dapra Corporation    Bloomfield, CT 06002
May 22, 2013 With adjustable center jaws, Allmatic CENTRO Gripp Vise allows workpiece to be held during complete machining process. Fully enclosed high-pressure spindle creates clamping force up to 8,992 lb and requires minimal maintenance. Jaw width is 5 in. with clamping ranges from 0.394–11.811 in. Made of cast iron GGG-60, vise includes precision aligning slots and positioning hole on bottom, as well as pre-machined holes in shoulders for mounting to table. Large lateral outlets facilitate chip removal.

Rohde & Schwarz GmbH & Co      Germany
May 22, 2013 FSW signal and spectrum analyzers are available with R&S FSW-K54 software option, which supports EMI bandwidths. To analyze disturbances, option contains EMI detectors, such as peak, quasi-peak, CISPR-average, and RMS-average, which are in line with CISPR and MIL standards. Option also includes database of predefined limit lines, as specified by international standards, as well as correction factors (transducers) for typical measurement tasks.

AMETEK Precitech, Inc    Keene, NH 03431
May 22, 2013 With Nanoform® X Multi-Axis Ultra Precision Machining System, users can maximize productivity in diamond turning, milling, and grinding of optical lenses, mold inserts, mirrors, and precision mechanical components. Machine can produce spherical, aspherical, and freeform surfaces up to 440 mm in diameter. Fully opening upper enclosure provides access to inner surfaces, while sloped sides on upper enclosure and stainless steel tray over granite base contribute to swarf containment.

Avalue Technology Inc.    Chung Ho City, Taipei   Taiwan
May 22, 2013 Renity Bedside Infotainment Platform is all-in-one computing solution with web browsing and email access, educational resources, entertainment, and automated services. Using touchscreen interface, patients can access Internet, telephone, instant messaging, hospital services, and more. Medical staff can access hospital information system and electronic medical records. It also connects with organization's infrastructure, information exchange systems, and content provider services.

GRW - High Precision Bearings LP    Draper, UT 84020
May 22, 2013 With retainer that maintains extremely low torque requirements of liquid/gas flow meters or anemometers, Specialty Ball Bearings enable measurement of smallest flow rates or slightest winds. Design prohibits micro movements of retainer during measuring or metering operation, providing consistently low, dynamic frictional torque. In dry running tests, bearings proved to maintain lifetime lubrication to maximum speed factor of 80,000 mm/min.

CUI, Inc.    Tualatin, OR 97062
May 22, 2013 Supplied in 3-pin, 11.60 x 7.50 x 10.20 mm, TO-220 compatible SIP, non-isolated P7805-S series is rated at 500 mA and has 4.75–32 Vdc input range that varies in line with output voltage configuration. Output options include 1.5, 1.8, 2.5, 3.3, 5, 6.5, 9, 12, and 15 Vdc. Efficiency is maintained across full input range, with rating of 95% at 32 Vdc. Targeting portable devices, battery-powered equipment, and embedded designs, products operate from -40 to +85°C and have 2 million hr MTBF.

GE Co.    Southfield, MI 48034
May 22, 2013 Smallworld™ Network Inventory v4.3 includes Smallworld Physical Network Inventory, Smallworld Logical Network Inventory, and Smallworld Network Inventory Gateway plus fiber-to-the-home and physical resource assignment solutions. Optimizing efficiency and uptime, suite provides utility and telecom operators with tools to plan, design, and document telecommunications networks. Scalable system allows operators to check physical diversity of network and supports operators of any size.

DeFelsko Corp.    Ogdensburg, NY 13669
May 22, 2013 PosiTector® 200 Ultrasonic Coating Thickness Gage measures thickness of polyurea and other coatings on concrete, up to 300 mil. Unit accepts all coating thickness, surface profile, environmental, and wall thickness probes. Advanced models include Wi-Fi and graphics mode with screen capture for detailed analysis of coating system.

DeFelsko Corp.    Ogdensburg, NY 13669
May 22, 2013 With probe change, PosiTector can convert from coating thickness gauge to surface profile gauge, dew point meter, or ultrasonic wall thickness gauge. Each probe retains its own calibration information, allowing for full probe interchangeability. Available in Standard or Advanced models, gauge features built-in memory, onscreen statistics, and USB drive. Advanced models also include high-contrast reversible color LCD, onscreen batch annotation, real-time graphing, and picture prompting.

NEC Display Solutions of America, Inc    Itasca, IL 60143
May 22, 2013 Intended for conference rooms and classrooms, PE401H features full HD 1080p (1,920 x 1,080) native resolution, DLP technology, and up to 2000:1 contrast ratio. Texas Instruments DLP® engine featuring BrilliantColor™ technology also comes standard, and remote control provides one-touch source changes and complete menu control. Plug-and-play, filter-free unit comes with dual connector inputs (HDMI with HDCP), 8 W speakers, as well as VGA and composite inputs.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
May 22, 2013 Model EX686B USB programmable electronic vibration switch is certified by INMETRO for use in hazardous areas such as petroleum refineries, utility gas plants, and oil drilling operations. To provide continuous machinery protection, unit senses vibration and triggers alarm or shuts down machine if vibration exceeds given threshold level. Faults such as imbalance, misalignment, looseness, worn bearings, cracked gears, or lack of lubrication can trigger fault.

Oclaro, Inc.    San Jose, CA 95134
May 21, 2013 Based on single emitter, Model BMU80 is available at output powers of 80 W with 0.15 NA or 65 W with less than 0.14 NA at 1 kFITchip rating, making it suitable for pumping kilowatt and high power pulsed fiber lasers. Multimode laser diode chip features proprietary optical scheme that delivers light into fiber with high-coupling efficiency. Controlled under-filled NA along with cladding mode stripping feature allows users to minimize losses at combiner.

San-Tron, Inc.    Ipswich, MA 01938
May 21, 2013 Serving PIM-sensitive environments though 6 GHz and military/avionics environments through 20 GHz, SRX™ cable assemblies combine eSeries coaxial connectors with SRX coaxial cables. Combination of PTFE with Rexolite™ promotes holding capability, while solder step in manufacturing lends to stability. Deployment scenarios include in-cabinet, plenum-rated, short runs and jumper applications, long-haul cable runs, indoor use, outdoor use, and riser, with several interconnect options.

GlacialPower    New Taipei City   Taiwan
May 21, 2013 Featuring constant current design with buck-boost topology, 10.8 W Model GP-LD10-30C and 17.5 W Model GP-LD15-24C have auto input voltage detectors for 12 or 24 V input. Reverse Protection prevents damage caused by accidentally connecting power lines in reverse by automatically disconnecting current. With IP65 design, drivers are protected from ingress of dust and water. Units operate at temperatures from -20 to 40°C at full load with efficiency greater than 84%.

AAEON Technology Inc    Taipei   Taiwan
May 21, 2013 Supporting Intel® Core™ i7/i5/i3 processors, EMB-B75A/B industrial motherboards serve multi-display digital signage applications where HD graphics images and video are essential. While EMB-B75B offers dual-channel LVDS support at 18-/24-bit, 2 HDMI, and one VGA input, EMB-B75A is configured with 3 HDMI inputs and one VGA port that support full 1080P graphics. Also, EMB-B75A provides dual Gigabit Ethernet ports, SATA 6.0 Gbps port, 2 SATA 3.0 Gbps, 4 USB 3.0, and 4 USB 2.0 ports.

Carlo Gavazzi, Inc.    Buffalo Grove, IL 60089
May 21, 2013 Along with microprocessor design and AirCore™ sensing coil, ICB Series is certified for use in Class I, Div 2, Groups A/B/C/D hazardous environments. Class I denotes compatibility with locations with flammable gases or vapors, and Division 2 applies to hazardous atmospheres present under fault conditions and for limited periods. Groups A, B, C, and D apply to groups of explosive gases: acetylene, hydrogen, ethylene, and propane. Potting process allows installation in heavy-duty applications.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 21, 2013 Used for testing each lane of multilane digital bus interfaces (DisplayPort, HDMI, PCIe®, MIPI™ D-PHY/M-PHY), automated switching solution comprises switch matrix software options for Infiniium compliance applications and preconfigured switch matrix hardware models that work with applications. Supported switch matrix hardware models include Agilent U3020AS26 and BitifEye BIT-2100 Series. Solution works with Infiniium Series oscilloscopes and is available on compliance applications.

Cermetek Microelectronics    Milpitas, CA 95035
May 21, 2013 Available with CDMA cellular radio, web-based AquaMon™ iController™ manages agricultural systems for vineyards, orchards, and farms. RSVP software running on web server processes, stores, and analyzes sensor data from field, permitting grower to monitor field parameters and control pumps/valves from tablet, smart phone, or PC. Offering web-based remote monitoring and control, CH2178 iController collects sensor data and moves it to secure web server via Ethernet, Wifi, GSM, or CDMA link.

OSI Laser Diode, Inc.    Edison, NJ 08820
May 21, 2013 Featuring standard thermal characteristics at Ta = 25°C, dual-wavelength MCW Combiner Series and triple-wavelength TCW TriBiner Series offer divisional wavelength values of 650, 850, 1,310, 1,550, 1,625, and 1,650 nm. TriBiner version also incorporates 650 nm red laser option, making it suitable for fault-finding tasks. Typical applications for RoHS-compliant lasers include OTDR instruments, spectroscopy, photon counting, optical sensors, and talk sets.

Hirose Electric (USA) Inc.    Simi Valley, CA 93065 6235
May 21, 2013 DF57H Series has swing lock design and can deliver 2.5 A in 1.2 mm pitch, 1.4 mm mated-height wire-to-board connector. With 2.0 mm pitch and swing lock design, DF59 Series can work as wire- or board-to-board connector. Vertically mated DF61 Series, with 2.2 mm pitch and 2.38 mm mated height, is rated to 5 A and 350 V AC/DC and also has swing lock design. Wire-to-wire DF62 Series has multi-row pin layout, smooth outside contour, and 2-point crimp contact design.