PA&E    Wenatchee, WA 98801
Feb 24, 2010 Manufactured using ceramic-to-metal sealing technology, windows suit optical, laser, and IR applications. Bonding properties and polycrystalline structure of Kryoflex® allow production of sight or wave-guide windows that maintain hermetic integrity under extreme environmental conditions. Due to sealing temperature, engineers can choose optical glasses such as sapphire, quartz, and BK10. Windows can be laser welded to range of metals, including aluminum, titanium, and iron/nickel alloys.

McQuay International    Minneapolis, MN 55440
Feb 24, 2010 Available in capacities from 175-530 tons, Pathfinder(TM) Chillers come in Standard, High, and Premium efficiency models to meet building owner requirements. Units feature sound pressure levels as low as 65 dBA, with no attenuation, making them suited for sound-sensitive environments such as schools, churches, and residential facilities. Operating with R-134a refrigerant, which has no ozone depletion potential and no phase-out schedule, chillers help owners qualify for LEED® certification.

Invensys Process Systems    London SW1E 5BF  United Kingdom
Feb 24, 2010 Available as part of DYNSIM v4.5 software release, DYNSIM® Checkout is SimSci-Esscor® medium-fidelity simulation solution which lets users identify, validate, and resolve control/safety application design errors throughout project lifecycle, and helps operators become familiarized with projects. Simulation's library of unit-operation models can be auto-generated using software with piping and instrumentation diagrams. These and process flow diagrams are used by product to complete models.

Scott Safety    Monroe, NC 28111
Feb 24, 2010 Freedom(TM) Direct gas detector senses combustible gases and CO₂ using IR or catalytic bead sensor technologies. Providing way to add points of detection to remote locations or areas where local display is not required, unit delivers information on gas concentrations to Scott controller without need for transmitter. Rugged SS housing protects unit from harsh environments. When combined with 5.5 V catalytic bead sensor, detector can operate in temperatures up to 392°F.

Linear Technology Corp.    Milpitas, CA 95035
Feb 24, 2010 Operating from -40 to 125°C, Model LTC3865/-1 features input voltage of 4.5-38 V and 9 selectable output voltages from 0.6-5 V. Dual output, synchronous step-down controller is 95% efficient with 2-pin selectable VOUT programming and line/load regulation. Onboard N-channel MOSFET driver enables use of high power external MOSFETs to produce output currents as high as 20 A, while constant-frequency current mode architecture allows selectable fixed or PLL switching frequency from 250-770 kHz.

Toshiba America, Inc.    Irvine, CA 92618
Feb 23, 2010 Available in 300, 450, and 600 GB capacities, 2.5 in. MBF series features 10,025 rpm spin speed and 6 Gbps SAS 2.0 interface for use in business-critical, data-intensive applications. Certain models offer option of drive-based encryption designed to TCG Enterprise Security Subsystem Class specification, and all offer power condition state that enables HDD to spin slower when not in use. Max data transfer rate is 216 MBps, and acoustics are rated to 29 dB or less.

American Industrial Systems, Inc.    Irvine, CA 92614
Feb 23, 2010 Able to survive adverse conditions, Ultra Rugged Mobile PDA features MIL-810F Environmental Engineering compliance and MIL-461F Control of EMI and EM Compatibility ratings. It is powered by 624 MHz Marvell PXA270 CPU and incorporates color 3.7 in. transflective QVGA TFT LCD. Additional resistive touchscreen is provided for input and control, and connectivity is provided by built-in 802.11 b/g/n WLAN module and Bluetooth V2.0 +EDR as well as GPS/GALLILEO receivers and 3G GPRS modules.

ROMI Machine Tools, Ltd.    Erlanger, KY 41018
Feb 23, 2010 Available in 1 or 2 m bed lengths with swing over bed of 620 mm, Series C620 can be equipped with electrically driven disk type turret with VDI-40 tooling or servo-driven WTO tool turret, allowing machining with static and live tools. Geared headstock version accommodates hydraulic indexing system with 72 positions to allow milling and drilling operations. With direct drive headstock, optional disc brake system allows milling and drilling in 360 angular positions.

GL Communications Inc.    Gaithersburg, MD 20877
Feb 23, 2010 Automated Network-Wide Voice Quality Monitoring system provides remote control and analysis of many mobile or static VQuad(TM) Nodes within testing network. Supporting PSTN, VoIP, TDM, and wireless telecom networks, system records output of each node and sends it to central location via TCP/IP connections. Central location includes database, command center for control/scheduling of network tests, email system for reporting errors/failures, and analysis algorithms for voice quality.

Energetiq Technology    Woburn, MA 01801
Feb 23, 2010 Offered as alternative to using multiple traditional lamps, Laser-Driven Light Source (LDLS(TM)) EQ Series delivers brightness over spectral range from 170 nm through visible and beyond. Singular EQ-1000/1500/1510 and EQ-99 employ laser-driven bulb technology for extended lifetimes, while inherent spatial and power stability enable repeatable measurements over extended periods of operation. Applications include circular dichroism, stopped-flow, and fluorescence spectroscopy.

Green Edge Systems, Inc    Woodland Hills, CA 91364
Feb 23, 2010 Tel-Tru Check-Temp Thermometer Calibrators enable accurate verification of thermometer accuracy at temperature points critical to School Food Services applications. Devices offer various factory-set single and dual calibration points, and specified models fit probes up to .250, .125, .187, and .375 in. dia. Traceable to NIST, products also feature built-in circuitry that warns if unit is more than 1° out of calibration.

Dr. Shrink, Inc.    Manistee, MI 49660
Feb 23, 2010 Holding approximately 600 sq ft of plastic, each REBAG® Kit consists of 30 x 50 in. clear bag with shrinkwrap removal directions printed on it, closure device, and prepaid UPS return label. To use, owner cuts off asset's cover above perimeter band after removing zipper access doors, strapping, and vents, and places it into bag. Bag is then closed with cable tie and self-adhesive return label is attached. Full REBAG® can be picked up by UPS or dropped off at UPS service center.

Appleton Electric    Cambridge, ON N3H2N1
Feb 23, 2010 To accommodate application and code standards that vary globally, XP Hybrid combines factory-sealed, cast, explosion-proof enclosure to house arcing breakers and stainless steel terminal enclosure for field terminations. It is suited for hazardous industrial locations where flammable gases or vapors are present, especially when used in protection of lighting and heat tracing circuits. NEMA-rated construction enables installation indoors or outdoors.

ASCO (Automatic Switch Co., Valve Div.)    Florham Park, NJ 07932
Feb 23, 2010 While 8214(200) Series 2-way NC solenoid valves can be used for fuel gases up to 5 psi, V710(B)/AH(E) Series 2-way NC electro-hydraulic actuated valves can be used with fuel gases up to 15 psi and is available with fast- and slow-opening constructions. Both series come in ¾-3 in. pipe sizes and have aluminum body construction with pressure taps up and downstream. Uses include boilers, furnaces, ovens, heating equipment, gas generators, and kilns.

AVX Corp.    Myrtle Beach, SC 29578
Feb 23, 2010 Housed in 3.2 x 1.5 x 0.8 mm ceramic package, Model ST3215SB has frequency tolerance of ±20 ppm, max ESR of 70 kW, and operating temperature of -40 to +85°C. Standard capacitance range is 9-12.5 pF, and low capacitance versions of 7 pF or less are available on request. Pb-free and RoHS-compliant, reflow compatible tuning fork crystal resonator is suited for consumer and mobile equipment applications.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Feb 23, 2010 General-purpose EM21 Series features detachable, connector-less, and battery-less LCD that lets user configure instrument for panel or DIN-rail mounting as energy meter or transducer. It is suitable for active and reactive energy metering for cost allocation as well as main electrical parameter measurement and retransmission. Solution supports single-phase (2-wire), 2-phase (3-wire), 3-phase (3-, 4-wire, balanced, unbalanced) systems for up to 400 VLL.

Ajax Systems Corp    Walnut, CA 91789
Feb 23, 2010 Powered by single 300 W ATX power supply, 1U Model RSC 12106 features 1x full height expansion slot via riser card and up to 4 GB memory. Unit has compact chassis made of heavy-duty cold rolled steel and cooling system that minimizes operating temperature by creating unrestricted flow. Measuring 8.66 in. deep, computer includes 1x slim drive bay, 1x 3.5 in. drive bay, and 2x front USB ports.

Industrial Supply, Inc.    Loveland, CO 80538
Feb 23, 2010 Long and lightweight, Boron Carbide Sandblasting Nozzles are third in hardness to diamond and cubic boron nitride, making them suitable when sandblasting very hard abrasives such as aluminum oxide or silicon carbide. Users can choose bore size and length, as well as aluminum or steel jacket.

American Portwell Technology, Inc.    Fremont, CA 94538
Feb 23, 2010 Optimized for quad-core Intel® Xeon® processor C5500 series with Intel® 3420 chipset, Model CAR-5000 features 2U rack mount chassis, dual sockets for processors, and Intel® QuickPath Interconnect technology, as well as Intel® Turbo Boost, Virtualization, and Hyper-Threading Technologies. Twelve DDR3 memory DIMMs support up to 96 GB system memory. Equipped with variety of Ethernet interfaces and ports, appliance is suited for UTM, IPS, IDS, anti-virus, firewall, VPN, and content filtering.

Chicago Pneumatic Co.    Rock Hill, SC 29730-7463
Feb 23, 2010 Industrial-strength CP3450 series angle grinders feature handle that can be positioned on either side of tool for left- or right-handed operation. Straight grinders in CP3451 series feature soft grip handle and double bearing supported spindle for low maintenance. Both have moveable lock-off throttle, positioned on top or bottom, and rear exhaust with optional silencer kit. Suited for use in harsh environments, they offer over 1,000 hr life with proper maintenance.