Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jan 27, 2012 Offering various save and direct cut/paste functions, 2012 R2 release of FeatureCAM uses multiple cores for calculations to accelerate simulation. Strategies for 2.5D roughing include continuous spiral option; high-speed roughing options, including trochoidal machining and race line machining; as well as tear-drop. Additionally, number of styles of leads and links available for use promote toolpath efficiency, and stepovers for 2.5D mill roughing can be set as large as tool diameter.

Unipower Corp.    Coral Springs, FL 33065
Jan 27, 2012 Available in both air- and water-cooled versions, DRC Series provides power densities down to 5.8 W/in.³ with advanced thermal management. Units accept single and 3-phase input voltages from 187-528 Vac and deliver output voltages from 500 V to 450 kV with ripple down to 0.1% of rated voltage. With 10.5 in. height and 24 in. depth, power supplies are designed for 19 in. rack mount. Remote analog signal input and optional serial bus control interfaces are available through rear panel.

IntelLiDrives Inc.    Philadelphia, PA 19152
Jan 27, 2012 Measuring 188 x 188 x 45 mm, Open Frame XY Stages replace manual stages found on microscopes and enable scanning speeds at 25 mm/sec. Linear encoder feedback ensures correct positioning with resolution of 0.1 µm and repeatability of 0.25 µm, while motion controller allows smooth positioning without vibration or shock to delicate samples. Very precise manual fine positioning is achieved through computerized control system and associated joystick.

ADG SOLUTIONS    Fairfield, CT 06824
Jan 27, 2012 Ram Stuffer is available with PLC control that maximizes efficiency by eliminating operator adjustments for recyclers of low bulk density polymer scrap. Designed for light feedstocks, ram stuffer has pneumatic reciprocating ram, mounted at feed throat, that stuffs material into screw. PLC control automatically adjusts timing of ram stroke in accordance with variations in extrusion drive amperage caused by material bulk density changes. PLC can be retrofitted on existing extruders.

Opto Diode Corp.    Newbury Park, CA 91320
Jan 27, 2012 Supplied in hermetically sealed TO-46 package with gold-plated surfaces and window caps that are welded to case, OD-850F GaAlAs IR LED produces angle that suits long-distance tasks in industrial control applications. Linear power output range spans 22 mW (min) and 30 mW (typ), with 850 nm peak emission. With optical power output of 30 mW typ @ 100 mA and continuous forward current at 100 mA, peak forward current, based on absolute max ratings at 25°C, is 300 mA.

Larson Electronics, LLC    Kemp, TX 75143
Jan 27, 2012 Designed for facilitated deployment at worksites and events, LM-30-3S-4X1000W can be raised from folded position using included 1,000 lb hand winch and then extended to full 30 ft height via second 1,000 lb winch. Tower comes equipped with 4 wet area-rated, 1,000 W metal halide light fixtures that, together, produce 400,000 lm. Constructed with square steel tubing and predrilled mounting base, tower can be mounted to trailers and flatbeds for transport and deployment.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 27, 2012 To prevent jamming, tearing, and shocks, Deluxe Super Ion Air Knife Kits use laminar sheet of air to neutralize static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3-D shapes up to 96 in. across. Units require 3.7 scfm of compressed air/ft of length at 5 psig. Electronic Flow Control turns on air knife only when it is needed. Power supply, EFC(TM), universal mounting system, shim set, filter separator, and pressure regulator are included.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 27, 2012 Supplied in SMD 0603 package, VLMx1300 series uses ChipLED technology and serves small-scale, high-brightness products that must work reliably in demanding environments. All versions, 6 colors and white, offer 130° viewing angle and use either AllnGaP or InGaN technologies. Luminous intensity is as high as 450 mcd at forward current of 20 mA and max forward voltage of 3.8 V. Blue version is available with protection diode that provides ESD immunity up to 8,000 V.

Powerex, Inc.    Youngwood, PA 15697
Jan 27, 2012 Split dual SiC MOSFET Modules QJD1210010 and QJD1210011 feature multiple circuit topologies, including independent, dual, in parallel, common collector, and common emitter. Designed for use in high-frequency applications, products are rated at 100 A/1,200 V, have -175°C junction temperature, and isolated baseplate of copper or AlSiC. Both modules include 2 MOSFET Silicon Carbide transistors, each with reverse-connected Zero Recovery® free-wheel silicon carbide Schottky diode.

AMETEK Petrolab Company    Broken Arrow, OK 74012
Jan 27, 2012 Offering gas and electric ignition options, Petrotest PMA-5 performs flash point testing of petroleum products using Pensky-Martens closed-cup ASTM D93 A, B, and C methods. Bench-top system includes over-temperature protection circuit, splashproof membrane key panel, and built-in sensor for automatic barometric pressure correction. Able to heat samples while performing tests unattended, tester can keep liquid at temperatures above 150°C, allowing for immediate start of stirrer.

Utility Integration Solutions, Inc    Lafayette, CA 94549
Jan 27, 2012 Integration software and services solution helps utilities optimize emergency preparedness and response with enhanced communication and interoperability. This is enabled via functionality for sharing real-time operational information with public security organizations as well as CIM and UICDS message standardization, which allows both utilities and emergency operations work off their own interfaces.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Jan 27, 2012 Equipped with TMS320DM365 processor, DLP® LightCrafter(TM) is based on reference design for TI's 0.3 in. WVGA resolution DLP chipset, which enables high-speed spatial light modulation. Chipset comprises DLP3000 MEMS device with 415,872 microscopic mirrors and DLPC300 controller, which operates micromirror array. Module also includes 128 MB NAND flash memory and configurable I/O trigger. Through USB-based API and GUI, developers can create, store, and display high-speed pattern sequences.

Walker    Indianapolis, IN 46280
Jan 27, 2012 Available on most mobile phone platforms, Walker Link Mobile gives account managers immediate access to customer feedback, allowing them to be more responsive to customers' needs. User interface includes optimized search capabilities and ability to manage follow-up. With mobile survey, clients can offer surveys specifically formatted for mobile devices, creating another way to collect customer feedback.

Equivio    Kensington, MD 20895
Jan 27, 2012 With Equivio Zoom, law firms, corporate legal teams, and service providers can integrate best-of-breed analytics across existing e-discovery workflows. Program combines near-duplicates, email threads, and relevance components together with data import/export, early case assessment, and analytics. By offering unified web-based approach, Zoom eliminates need to move data between applications, minimizing data handling cycles and risk of errors.

ecobee inc    Toronto M5V 1R5  Canada
Jan 27, 2012 With Wi-Fi enabled Smart Si Thermostat, users can remotely make adjustments via computer, iPhone, smartphone, or tablet. Unit has built-in live weather function and uses advanced algorithms to ensure it is always saving most energy possible. Color display and intuitive user interface help users set personalized program, while automatic alerts and reminders notify users of equipment malfunction, when HVAC equipment is due for service, or when it is time to change filter.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jan 27, 2012 Made with forged anodized aluminum body and thick-walled stainless steel fluid tube, 7,500 psi Airless 75 is compatible with high solids and abrasive industrial materials. Needle design keeps spring out of fluid's path, while ergonomic handle and 2-finger trigger helps minimize fatigue. With optional heat guard, unit can handle heated coatings up to 175°F. On Airless 75 Direct Connect model, fluid hose attaches directly to gun, allowing use of high solids and high viscosity materials.

AnalySwift, LLC    North Logan, UT 84341
Jan 27, 2012 Used for modeling of composite slender structures, VABS v3.6 employs accelerated method of optimizing finite element mesh and is optimized to handle larger models. For realistic blade meshed with 200,000 degrees of freedom, using typical laptop, software takes less than 20 sec for constitutive modeling (Timoshenko model). Use of Dynamic Link Libraries further accelerate process, and structures as complex as composite rotor blades with hundreds of layers can be handled by laptop computer.

Kollmorgen Corp.    Radford, VA 24141
Jan 27, 2012 AKD series supports analog, indexing, CANopen, and EtherCAT drives, boosting bench testing and prototyping efficiency for machine builders while also enabling them to smoothly transition from one bus type to another. Also, drives support many feedback devices and Ethernet motion buses from base hardware without separate option cards. Additional features include auto-tuner, up to 27-bit resolution, dual processor system, and GUI with 6-channel, real-time software oscilloscope.

Analog Devices Inc    Norwood, MA 02062
Jan 27, 2012 Housed in 20-lead 4 x 4 mm LFCSP, Models ADP5041 and ADP5040 integrate 3 MHz, 1.2 A buck regulator with 0.8-3.8 V output voltage and two 300 mA LDOs with 0.8-4.75 V output. Units minimize thermal dissipation by using switching regulators with up to 96% buck power efficiency. For low-noise analog circuit applications, LDOs maintain power supply rejection greater than 60 dB for frequencies up to 10 kHz. ICs serve as power management companions to mid-range FPGAs, microprocessors, and DSP systems.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jan 27, 2012 Featuring 80 Shore A hardness, Elastocon 8078NL provides scratch and mar resistance as well as shock and sound deadening qualities. Product's coefficient of friction results in surface that minimizes collection of dust and debris. RoHS-compliant TPE does not require drying and is latex-free, reclaimable, and recyclable. Offering rubber-like qualities, Elastocon 8078NL is suited for automotive cup holders and storage tray bins, farm equipment, marine products, and lawn/garden tools.