Dytran Instruments, Inc.    Chatsworth, CA 91311
Jan 30, 2012 Available in 3 sensitivities of 10, 50, and 100 mV/g, Series 3263A combines ceramic shear sensing elements and low-noise electronics in titanium housing. Units offer broad frequency response with 4-pin radial connector and internal 4-40 thread for stud mounting. Hermetically sealed for high-humidity and dirty environments, IEPE accelerometers are suited for automotive applications, including modal and structural analysis, NVH, squeak and rattle, and vibration control.

Photron USA, Inc.    San Diego, CA 92126
Jan 30, 2012 Equipped with 312 x 260 pixel resolution ISIS CCD sensor system, Fastcam IS-1M captures high-speed events, even in low-light conditions. Key feature is sensor where signal storage areas for recorded images are incorporated within chip. When using 2 or more cameras, 10-bit monochrome camera allows synchronous recording. Recorded images can be saved as AVI video or as JPEG, TIFF, or AVI image sequences. System includes intuitive camera control and image download software via USB 2.0 interface.

Endeavors Technologies Inc.    California, CA 92612
Jan 30, 2012 Application Jukebox v8.5, combined with Red Hat Enterprise Virtualization for Desktops v3.0, delivers comprehensive application delivery platform for virtualized desktop infrastructure. Program saves virtualization resources by reducing size of desktop images since applications do not need to be included. Whether user is considering migration to cloud computing model or looking at hosted desktop solution, Application Jukebox can deploy applications to users who need them, when they need them.

Allied Vision Technologies GmbH    Newburyport, MA 01950
Jan 30, 2012 Equipped with Sony ICX694 EXview HAD CCD sensor, 6 megapixel Prosilica GX2750 can output 19 fps at 2,750 x 2,200 resolution using single Ethernet cable connection. Unit has Dual GigE Vision® interface and can be used in single or dual Gigabit port configurations, supporting sustained data rate up to 240 MBps. Cameras is suited for machine vision, industrial, medical, scientific, surveillance, and ITS applications.

Spiricon, Inc.    Logan, UT 84341 5740
Jan 30, 2012 Supporting Ophir laser power meters as well as 64-bit versions of Windows® Vista/7, BeamGage® v5.7 analyzes beam size, shape, uniformity, and divergence. It includes native language support for English, Japanese, and Chinese and is also compatible with German MS Windows environments. UltraCal(TM) baseline correction algorithm ensures zero-point reference is accurate to 1/8 of digital count on pixel-by-pixel basis, and image processing adapts to less than ideal environments, such as camera offset angles.

Intense Fabrication & Design    Brookfield, OH 44403
Jan 30, 2012 Series 8000 includes 793 nm high-brightness laser pump modules that deliver 10 W output power from 105 micron core fiber, 0.22 numerical aperture (NA). Designed for use as pump source for Thulium and Holmium pulsed laser systems, modules are based on 793 nm single emitter chip that incorporates narrow beam divergence and quantum well intermixing technology to maximize power, brightness, and reliability. Packages with 0.15 NA fiber options are available on request.

Caringo, Inc.    Austin, TX 78731-1721
Jan 30, 2012 Designed to make big data manageable, Object Storage Platform 5.5 comprises 3 software applications that work together to provide scalable storage with automated protection and replication. CAStor® object storage engine stores files of unknown size via chunked encoding, while Content Router rules-based workflow engine for metadata-driven global replication supports enumeration of named objects. With watchdog feature, web-based Cluster Services Node will automatically restart failed services.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jan 30, 2012 Agilent N4880A provides multiplying PLL that lets R/D and test engineers lock pattern generator clock of J-BERT N4903B and ParBERT 81250A to reference clocks from system under test. Reference clock rates from 19-100 MHz support receiver test applications such as PCIe® 1.x, 2.x, and 3.0 main boards; MIPI M-PHY devices; and UHS-II host devices. Simplified receiver test setup helps R/D and test teams accurately characterize and verify standard compliance under reproducible test conditions.

Polycoat Products    Santa Fe Springs, CA 90670
Jan 30, 2012 Applied at 1/8-3/8 in. dry film thickness via trowel or slurry, PC-CRETE® U can be used to form containment beams or integral cove bases for seamless wall to floor protection as well as to slope floors in horizontal applications. This 3-part, heavy-duty, 100% solids, aromatic, cementitious urethane mortar system has textured matte finish and provides barrier against hydrostatic pressure and thermal shock. Return-to-service time is typically 4-6 hr.

Saint-Gobain Performance Plastics, Flexible Components Hose Assemblies    Bridgewater, NJ 08807
Jan 27, 2012 Intended for fluid transfer, Sani-Tech® Ultra-HP comprises reinforced outer jacket, multiple layers of platinum-cured silicone, 316L SS helical wire reinforcement, and PharmaFluor® FEP liner. Liner's smooth inner bore surface helps optimize flow while facilitating cleaning and sanitization. With low TOCs, extractables, and leachables, liner minimizes bonding of biological materials and maintains fluid purity. Applications include bioprocessing, load cells, and SIP/CIP.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Jan 27, 2012 Offering various save and direct cut/paste functions, 2012 R2 release of FeatureCAM uses multiple cores for calculations to accelerate simulation. Strategies for 2.5D roughing include continuous spiral option; high-speed roughing options, including trochoidal machining and race line machining; as well as tear-drop. Additionally, number of styles of leads and links available for use promote toolpath efficiency, and stepovers for 2.5D mill roughing can be set as large as tool diameter.

Unipower Corp.    Coral Springs, FL 33065
Jan 27, 2012 Available in both air- and water-cooled versions, DRC Series provides power densities down to 5.8 W/in.³ with advanced thermal management. Units accept single and 3-phase input voltages from 187-528 Vac and deliver output voltages from 500 V to 450 kV with ripple down to 0.1% of rated voltage. With 10.5 in. height and 24 in. depth, power supplies are designed for 19 in. rack mount. Remote analog signal input and optional serial bus control interfaces are available through rear panel.

IntelLiDrives Inc.    Philadelphia, PA 19152
Jan 27, 2012 Measuring 188 x 188 x 45 mm, Open Frame XY Stages replace manual stages found on microscopes and enable scanning speeds at 25 mm/sec. Linear encoder feedback ensures correct positioning with resolution of 0.1 µm and repeatability of 0.25 µm, while motion controller allows smooth positioning without vibration or shock to delicate samples. Very precise manual fine positioning is achieved through computerized control system and associated joystick.

ADG SOLUTIONS    Fairfield, CT 06824
Jan 27, 2012 Ram Stuffer is available with PLC control that maximizes efficiency by eliminating operator adjustments for recyclers of low bulk density polymer scrap. Designed for light feedstocks, ram stuffer has pneumatic reciprocating ram, mounted at feed throat, that stuffs material into screw. PLC control automatically adjusts timing of ram stroke in accordance with variations in extrusion drive amperage caused by material bulk density changes. PLC can be retrofitted on existing extruders.

Opto Diode Corp.    Newbury Park, CA 91320
Jan 27, 2012 Supplied in hermetically sealed TO-46 package with gold-plated surfaces and window caps that are welded to case, OD-850F GaAlAs IR LED produces angle that suits long-distance tasks in industrial control applications. Linear power output range spans 22 mW (min) and 30 mW (typ), with 850 nm peak emission. With optical power output of 30 mW typ @ 100 mA and continuous forward current at 100 mA, peak forward current, based on absolute max ratings at 25°C, is 300 mA.

Larson Electronics, LLC    Kemp, TX 75143
Jan 27, 2012 Designed for facilitated deployment at worksites and events, LM-30-3S-4X1000W can be raised from folded position using included 1,000 lb hand winch and then extended to full 30 ft height via second 1,000 lb winch. Tower comes equipped with 4 wet area-rated, 1,000 W metal halide light fixtures that, together, produce 400,000 lm. Constructed with square steel tubing and predrilled mounting base, tower can be mounted to trailers and flatbeds for transport and deployment.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 27, 2012 To prevent jamming, tearing, and shocks, Deluxe Super Ion Air Knife Kits use laminar sheet of air to neutralize static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3-D shapes up to 96 in. across. Units require 3.7 scfm of compressed air/ft of length at 5 psig. Electronic Flow Control turns on air knife only when it is needed. Power supply, EFC(TM), universal mounting system, shim set, filter separator, and pressure regulator are included.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 27, 2012 Supplied in SMD 0603 package, VLMx1300 series uses ChipLED technology and serves small-scale, high-brightness products that must work reliably in demanding environments. All versions, 6 colors and white, offer 130° viewing angle and use either AllnGaP or InGaN technologies. Luminous intensity is as high as 450 mcd at forward current of 20 mA and max forward voltage of 3.8 V. Blue version is available with protection diode that provides ESD immunity up to 8,000 V.

Powerex, Inc.    Youngwood, PA 15697
Jan 27, 2012 Split dual SiC MOSFET Modules QJD1210010 and QJD1210011 feature multiple circuit topologies, including independent, dual, in parallel, common collector, and common emitter. Designed for use in high-frequency applications, products are rated at 100 A/1,200 V, have -175°C junction temperature, and isolated baseplate of copper or AlSiC. Both modules include 2 MOSFET Silicon Carbide transistors, each with reverse-connected Zero Recovery® free-wheel silicon carbide Schottky diode.

AMETEK Petrolab Company    Broken Arrow, OK 74012
Jan 27, 2012 Offering gas and electric ignition options, Petrotest PMA-5 performs flash point testing of petroleum products using Pensky-Martens closed-cup ASTM D93 A, B, and C methods. Bench-top system includes over-temperature protection circuit, splashproof membrane key panel, and built-in sensor for automatic barometric pressure correction. Able to heat samples while performing tests unattended, tester can keep liquid at temperatures above 150°C, allowing for immediate start of stirrer.