Newport Corp.    Irvine, CA 92606
Mar 17, 2010 OTS-LSC connects directly to SmartTable®-OTS(TM) Optical Table System's overhead shelf, conforms to ANSI standards, and withstands exposure levels up to 200 W/cm² for 100 sec based on 5 mm beam dia. Nominally, 4 ft tall product provides 12 in. gap around perimeter of table. When installed at its maximum height of 78.5 in., curtain drapes below table surface by 8 in. Several standard sizes are available.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 17, 2010 Respectively featuring 8 and 4 ports, PCIe-COM232-8 and PCIe-COM232-4 are PCIe RS-232 serial communication cards with low-profile PCIe MD1 form factor. Plug-and-play units support data communication speeds to 921.6 kbps (standard model 460.8 kbps) and integrate 16C950 class UARTs with 128-byte FIFO for each TX and RX. Along with ±15 kV ESD protection on all signal pins, features include full modem control signals and 3 ft breakout cable terminating with DB9M connectors.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 17, 2010 Offering software-selectable timeout from 4 µsec, Model P104-WDG-CSMA contains watchdog timer that monitors operation of application program and operating system to initiate system reset in case of lockup. Card can also monitor and control variety of system hardware parameters. Featuring 2 general purpose 8-bit A/D inputs and 2 current-limited, isolated outputs, P104-WDG-CSMA provides temperature measurement, fan status and speed control, and PCI/104 power monitor.

360 Systems    Newbury Park, CA 91320
Mar 17, 2010 Suited for broadcast, production, and Pro AV markets, MAXX-1200HD and 2400HD are JPEG-2000 can directly import 10-bit images created in JPEG-2000 by Grass Valley's Infinity(TM) camcorder without transcoding. Video wrapped as MXF files can also be exported from server to Grass Valley's Edius NX(TM) workstation for editing. File-based return delivers edited JPEG-2000 project to server for playout, and MXF file transfers maintain 10-bit quality of original image.

KICTeam, Inc.    Auburn, ME 04211-1120
Mar 17, 2010 To help avoid reader errors, Waffletechnology Smart Card Reader Cleaning Card ensures read contacts can properly access smart chip by gently removing dirt, oils, and other contaminants introduced by credit cards. Product gently cleans critical read/write components and can be used on regular maintenance schedule to help maintain uninterrupted service. It may also be used in other swipe and dip card readers that use magnetic stripe technology.

Greenlee Textron, Inc.    Rockford, IL 61109
Mar 17, 2010 Powered by 18 V Li-Ion battery, Model LS60L can punch hole for 2 in. conduit in 10-gauge mild steel and 12-gauge stainless steel in about 10 sec. Tool senses when hole is completely punched and automatically shuts off to prevent damage to punch and die. Forward handle position optimizes tool balance, and one trigger controls all tool functions. To illuminate dark areas, driver includes LED work light that also provides battery charge and tool maintenance status.

Airtec Products Corp    Fall River, MA 02720
Mar 17, 2010 Made specifically for North America, Fortress(TM) lineset covering system is intended for mini-splits or ducted split air conditioning systems. Extruded PVC lengths and injection-molded fittings are resistant to effects of UV and weather, and sweep elbows accommodate long radius 90° bends. Full 8 ft lengths reduce joints and waste, while 2 deep profiles - 3.5 and 4.5 in. - respectively accommodate standard and heavily-insulated or multiple linesets.

TAOS Inc.    Plano, TX 75074
Mar 17, 2010 Providing both ambient light sensing and proximity detection in single device, TSL2771 Series is suited for touch screen smart phones, laptops, and desktop computers. Units incorporate IR LED current-limited driver, ADC, interrupt capability, and multiple I2C interface voltage options. Dual-photodiode architecture allows sensor system to compensate for IR component. When combined with ability to adjust analog gain settings up to 128 X, device excels in low-light level applications.

Cissoid    Mont Saint Guibert 1435  Belgium
Mar 17, 2010 PROMETHEUS-II is intended to drive Silicon-Carbide (SiC), GaN, and other power devices, such as MOSFETs, IGBT, JFET, and BJT, in applications requiring continuous operation. Current capability depends on MOSFETs used in output push-pull stage: CHT-NMOS4005, CHT-NMOS4010, and CHT-NMOS4020 respectively sink up to 6, 12, and 22 A at 25°C in switching mode. Reference design is based on half-bridge driver CHT-HYPERION.

Pyramid Technologies, Inc.    Meriden, CT 06451
Mar 17, 2010 With Model 2600, companies can track employees' time and attendance with precision. Highlighted recordings provide indisputable payroll data including early/late punch in and overtime information, minimizing incidences of overcompensation and unearned leave. Featuring space saving design, recorder offers dual-color LCD backlit display, 2-color printing, 6-column timecard, and auto alignment with top loading and ejecting, which eliminates misaligned, hard-to-read recorded hours.

U.S.A. Wire & Cable, Inc.    Austin, TX 78744
Mar 17, 2010 Offering protection from sun, ozone, heat, and abrasion, Direct Burial PV Wire utilizes Ethylene Propylene Rubber insulation and Chlorinated Polyethylene protective jacket, which is preferred solution for transformerless inverter systems. Seven-strand bare copper conductor is recommended as it provides optimal contact at combiner box if built-in bulkhead connectors are not utilized. In addition to UL 4703 rev of 11/17/09, wire includes UL VW-1, RHH or RHW-2, UL 44, and UL4703 ratings.

Midwest Motion Products    Watertown, MN 55388
Mar 17, 2010 Accepting any 24-28 Vdc source, including battery power, Model MMP-TM55-36-28V with integral brake measures 2.2 in. dia x 7.2 in. long and has keyed output shaft of 0.500 in. dia x 1.5 in. long. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. Requiring 2.1 A at 28 Vdc to generate full load torque, gearmotor features True Planetary Gearing with Delrin first stage, which allows for nearly silent operation.

Rubbermaid Commercial Products LLC    Winchester, VA 22601
Mar 17, 2010 Designed to meet or exceed EPA guidelines, Element Indoor Recycling Stations provide centralized collection for multi-stream waste and recycling sortation. Smooth Uni-Koat® powder coated finish, in Silver Metallic or Desert Pearl, resists scratches and fingerprints and facilitates cleaning. In 4-stream configuration, Element Stations can hold up to 57 gal of waste and recyclable materials. Piano-hinged doors are available with optional lock to secure contents and deter theft and vandalism.

E Instruments International LLC    Langhorne, PA 19047
Mar 17, 2010 Featuring ABS shock-proof housing with IP54 dust protection, portable Model AMI300 supports variety of wireless probes. Unit monitors CO, CO2, temperature, humidity, airflow using vane and hot wire, air velocity using pitot tube, and current/voltage. Suitable for all IAQ applications, tester includes speed tachometer, blue LCD display, min/max/hold/unit selection, and data storage with software capabilities.

Danfoss VLT Drives    Loves Park, IL 61111
Mar 17, 2010 Supplied with AMP, Deutsch, and Delphi plugs as standard, MBT 3270 helps keep exhaust gas recirculation (EGR) systems in engines under control for compliance with Tier regulations. It employs accurate sensor element (Pt100 or NTC) and operates in temperatures to 572°F. Offering accelerated response to temperature changes, sensor is built to stand up to aggressive atmospheres in exhaust gas and exhibits minimal impact on measurement from ambient temperature.

STMicroelectronics    Lexington, MA 02421
Mar 17, 2010 Including 4 models, SPEAr embedded microprocessors are manufactured in low-power 90 and 65 nm high-speed CMOS process technologies and combine 1 or 2 advanced ARM9 processor cores. Suited for HMI and security applications, SPEAr300 includes camera interface and LCD and keyboard controller, while SPEAr310 with 5 fast Ethernet and 2 HDLC ports, suits telecom network applications. SPEAr320 suits factory automation and dual-core SPEAr600 targets compute-intensive embedded applications.

Rockford Systems, Inc.    Rockford, IL 61109 2695
Mar 17, 2010 Designed to protect operator's fingers from point-of-operation hazards, DAF-100 Detect-A-Finger® consists of control box, drop-probe assembly, and aluminum sensing probes and provides adjustable stroke of up to 4 in. Drop-probe assembly moves sensing probe to point-of-operation hazard prior to each machine cycle, if probe encounters operator's fingers and fails to drop to preset position, machine cycle will not be initiated. Unit is designed for compliance with OSHA 29 CFR, Subpart 0, 1910.212.

Gateway Safety, Inc.    Cleveland, OH 44131 1045
Mar 17, 2010 Featuring lightweight, impact-resistant polycarbonate lens, Cover2(TM) over-the-glasses eyewear offers wide, unobstructed field of vision and blocks 99.9% of UV-A and UV-B light. It meets or exceeds ANSI Z87.1+ and CSA Z94.3 standards and can be used with contemporary prescription eyewear. Suited for small faces, eyewear features flexible temple tips for comfort and is available with clear or gray lens.

Gowanda Electronics Corp.    Gowanda, NY 14070
Mar 17, 2010 Rated for currents from 205-1,384 mAdc and housed in 0.070 x 0.120 x 0.130 in. footprint, SMP1210S series inductors are designed for use in power applications, including filters for DC/DC converters and switching regulated power supplies. Saturation current is from 200-2,060 mAdc and coupling is less than 4% with 1 mm of spacing between components. Operating at temperatures of -55 to +125°C, units also suit microprocessor applications.

AirClean Systems, Inc.    Raleigh, NC 27604
Mar 17, 2010 Capable of enclosing equipment up to 52 in. tall, OSHA and ANSI Z9.5 compliant E-Series fume hoods are available in 36, 48, and 72 in. sizes to fit variety of applications. They pull room air through back baffle and filter chemical fumes, vapors, and particulate via bonded carbon and/or HEPA filtration before returning clean air back to room. Upper folding sash and lower access doors provide full access for equipment to be quickly inserted or removed from enclosure.