MediaTek Inc.    Hsin-Chu   Taiwan
Mar 04, 2013 Comprised of hardware and software, MiraVision delivers seamless full HD display picture quality on mobile devices such as smartphones and tablets. Functionality ensures content will be displayed vividly and saturated with details, providing rich and colorful viewing experience. Ambient-Light Adaptive Luma technology, included, intelligently adjusts panel backlight in response to ambient light intensity and displayed contents, simultaneously optimizing battery life and viewing experience.

Protek Devices    Tempe, AZ 85282
Mar 04, 2013 Supplied in QFN-16 package with Pb-free pure-tin plating and flammability rating of UL 94V-0, PA5711 offers such dimming options as PWM, Linear Dimming, Motion Detection, and Light Sense control inputs. Direct gate driver control is available through active high enable pin, and internal oscillator frequency can be set externally through resistor. Allowing leading edge blanking with desired delay requirements, driver has 11–480 V input range and more than 95% efficiency.

Broadcom Corp.    San Jose, CA 95110
Mar 04, 2013 Simultaneously supporting 3G, 4G LTE, and WiFi offload capabilities for 200+ users, scalable small cell development platform for multiple radio access technology (RAT) integrates all required hardware and software. Modular design includes XLP-208 multicore processor as well as software which enables features such as content caching, interference monitoring, SON, DPI-based services, and security to be deployed while maintaining line speed performance as new network services are added.

National Instruments Corp.    Austin, TX 78759-3504
Mar 04, 2013 Built on software-designed architecture that engineers can modify with LabVIEW to meet specific needs, NI PXIe-5645R can test both RF and baseband signals of device with single instrument. Unit features frequency range of 65 MHz to 6 GHz and baseband I/Q interface with 16-bit data sampled at 120 MS/s and up to 80 MHz of complex bandwidth, configurable as differential or single ended. User-programmable FPGA enables real-time signal processing and control.

Broadcom Corp.    San Jose, CA 95110
Mar 04, 2013 Optimized for high-speed wireless connectivity in 4G LTE networks, BCM85625 Series features multi-core system-on-chip that achieves industry's highest modulation of 4K-QAM, allowing telecom operators to efficiently deliver broadband services. Product integrates full cross-polarization interference cancellation and multi-channel functionality.

Sony Electronics Inc    San Diego, CA 92127
Mar 04, 2013 Based on 20.1 MP Exmor APS HD CMOS sensor, Model SLT-A58 features Translucent Mirror Technology, which delivers non-stop phase detection autofocus and continuous live image preview during still and full HD video shooting. BIONZ image processing engine individually adjusts levels of noise reduction and sharpness in different imaging areas. In addition to OLED Tru-Finder electronic viewfinder, camera includes Auto Object Framing which tracks, frames, and crops shot based on what is in scene.

Elsevier    Philadelphia, PA 19103
Mar 04, 2013 With cloud-based InOrder, clinicians can author, review, and publish orders in collaborative environment that translates evidence-based knowledge into better patient care. Program includes access to answers from ClinicalKey clinical insight engine; collaboration tools for order set development, maintenance, access, and tracking; and tailored, concise ordering focused on most common scenarios. By making updates as regulations and medications change, InOrder helps prevent medical errors.

Telecommunication Systems Limited    Annapolis, MD 21401
Mar 04, 2013 Available in serial ATA and parallel ATA interface versions, BGADrive® SSDs are suited for unmanned aerial vehicles, wearable computers, and miniature embedded systems. Drives include SSD controller which provides complete, on-the-fly error correction and end-to-end error detection through use of cyclic redundancy check code to ensure data is reliably stored and retrieved. Housed in 31 x 31 mm BGA, units meet MIL-STD-810 requirements for shock, vibration, temperature, humidity, and altitude.

IC-TAG Solutions, Inc    Bridgeview, IL 60455
Mar 04, 2013 Based on UA1000i RFID Appliance with integrated middleware, IC-DEMO JumpStart Kit enables users to find out how RFID will work for them and experiment with applications, such as tracking IT assets, identifying location of valuable test equipment, and access control for security and membership management. Kit comes with collection of tags spanning variety of types, forms, and vendors. With HyperSage and AnyHost software, users can customize data acquisition mode, timing, and data filtering. 

Tumbler Technologies, Inc.    Santa Clara, CA 95054
Mar 04, 2013 Suited for space-constricted applications, 81.5 x 40.5 x 190 mm TMPC-250-1U has 90–264 Vac input rating and active PFC and is approved by UL, cUL, and TUV to third edition EN 60601-1, IEC 60601-1, and UL 60601-1 medical standards. MTBF at full load is higher than 205K hr at 25°C ambient, and Earth leakage current is typically as low as 155 µA @ 264 Vac. Available DC output voltages and max loads include +3.3 V/12 A, +5 V/14 A, +12 V/18 A, -12 V/0.3 A, -5 V/0.3 A, and +5 Vsb/2.5 A.

Blaser Swisslube Inc.    Goshen, NY 10924
Mar 04, 2013 Formulated for use in heavy-duty machining applications over wide range of materials, Blasocut® BC940 provides bio-chemical stability and extended sump life, without use of bactericides, while maintaining environmental health and safety. Optimized washing action and low misting properties contribute to machine and shop cleanliness. Suitable for use in hard or soft water, Blasocut® BC940 provides foam control in moderate to high coolant pressure applications.

Wessex Power    Poole   United Kingdom
Mar 01, 2013 Supplied with temperature/humidity probe, power supply interface cable for Ethernet connection, and software, TR-700W Series lets user make device settings, monitor current readings, and gather recorded data via LAN or Internet connection. WebViewer application allows viewing of data graphs in browser, while T&D WebStorage Service enables anytime, anywhere access to recorded data for monitoring, analyzing, and printing. When user set conditions have been met, warning report e-mails can be sent.

Larson Electronics, LLC    Kemp, TX 75143
Mar 01, 2013 Rated for 15 A continuous use where flammable gases and vapors may be encountered, EPEXC-25 safely and securely increases range of equipment and devices within hazardous locations when power outlets are not readily accessible. Design features 25 ft of oil- and abrasion-resistant, 12/3 SOOW explosion-proof cord; 20 A receptacle; and 15 A, 2-pole, 2-wire, T style explosion proof plug. Product is approved for Class 1 Division 1 and Class 2 Division 1 locations as well as wet areas.

LEDtronics, Inc.    Torrance, CA 90505
Mar 01, 2013 Able to replace incandescent bulbs up to 60 W while consuming 13 W, DEC-A19F-13W-XIW-120AWD DécorLED™ Series can operate from 100–120 Vac supply, produces 956 lm, and has 80+ CRI. Warm white (3000K), bulb supports drop-in installation in existing 26 mm Edison screw-in base sockets and has average lifespan of 50,000+ hr. Construction features UV-stabilized polycarbonate lens over high-brightness LEDs encapsulated around grill-style, heat-sinking, magnesium-alloy housing.

MaxLite    West Caldwell, NJ 07006
Mar 01, 2013 Used for commercial flood light applications and general area illumination, second generation Element Flood Light Series offers self-contained modular elements with various lumen output and optics options. Design can be specified in one, two, or three 135 W modules, and each can have 22°, 55°, or 120° beam angle. Featuring 5000K CCT and 99% power factor, series can replace 250–1,000 W metal halide fixtures and has die cast aluminum body and tempered glass lens that seals module to IP65.

Servo2Go.com    Greenville, DE 19807
Mar 01, 2013 Available for OEMs, Able VRB delivers precision and torque handling capabilities suited for packaging machinery, medical equipment, and assembly cell automation. Nominal output torque ranges from 238–13,276 lb-in., and backlash rating is less than 3 arc-min as standard. There are 6 basic sizes, available as single and double reduction units, which offer input range from 30–5,000 W, input speeds up to 6,000 rpm, and ratio range from 3:1 to 100:1. Standard mounting is through-bolt style.

EasySYNC Ltd,    Hillsboro, OR 97124-5803
Mar 01, 2013 Combining oscilloscope, data logger, spectrum analyzer, voltmeter, and frequency meter in single product, dual-channel Model DS60M10 offers 10-/8-bit data streaming simultaneously on both channels. Oscilloscope supports speeds of 60 Hz, while data logger provides sampling rate up to 1 KS/s, and analog inputs of voltmeter have max range of ±50 Vdc. Measuring 116 x 30 x 100 mm, USB-based unit draws 500 mA from standard interface port, eliminating need to connect to any other power source.

Pregis Corp.    Deerfield, IL 60015
Mar 01, 2013 Combining software, personnel, parts management, and 24/7 service hot line, PX3 anticipates and predicts machinery service needs of Pregis protective packaging equipment – IntelliPack® foam-in-place, AirSpeed® air cushioning, and Quantum® Geospeed™ paper units – before downtime event occurs. Cellular connectivity for SmartBagger™ unit on IntelliPack® enables real-time operating data feedback, and database can predict when parts for air cushioning equipment should be switched out.

Fluke Corp.    Everett, WA 98203
Mar 01, 2013 Providing 0.01% reading accuracy, Fluke® 709H minimizes time it takes to measure or source, voltage or current, and power up loop. Unit features Quick-Set rotary encoder knob, 2-wire connection, and built-in selectable 250 Ω resistor to tune loop for HART communications. In communicator mode, technicians can read basic device information, perform diagnostic tests, and trim calibration on most HART-enabled transmitters. Ramping and auto-stepping enable technicians to perform tests remotely.

Delcam Plc    Birmingham Hampshir B10 0HJ  United Kingdom
Mar 01, 2013 With stock model options, FeatureCAM 2013 R2 can minimize tool wear and optimize surface finish by eliminating excessive tool engagement and limiting maximum depth of cut into un-machined material. Detect Metal Thicker command ensures that rest material thinner than specified limit is ignored, preventing toolpaths from being generated in areas where benefit of extra cut is negligible. In addition, software incorporates methods for generating html set-up sheets.