Birchwood Casey    Eden Prairie, MN 55344 2138
May 11, 2010 Applied to wet or dry metal surfaces, DRI TOUCH® Non-VOC forms colorless dry-to-touch protective film that resists atmospheric humidity and corrosion. Pale, amber liquid has 248°F flash point and film thickness of 0.15 mil, providing effective coverage of 1,500 sq ft/gal. Rated for 100-150 hr salt spray and 600+ hr humidity protection, DRI TOUCH Non-VOC meets water displacement test Mil-C-16173 and stain test Mil-C-22235A. It can be used without causing air contamination or fire safety problems.

AAEON Technology Inc    Taipei   Taiwan
May 11, 2010 Along with dual-core Intel® Atom(TM) processor D510 that supports embedded applications, COM-LN utilizes Intel 82801HM I/O Controller (ICH8-M) and Intel 82567V Gigabit Ethernet Controller. One parallel IDE and 3 SATA interfaces allow flexible storage options, while expansion is supported via 5 PCIe x1 lanes, optional 6 PCIe x1 lanes, four 32-bit PCI, as well as LPC, SMBus, and I²C interfaces. Module also supports simultaneous and dual-view display through LVDS LCD and analog CRT.

Radiometrix Ltd.    Watford Hertfordsh WD19 5EZ  United Kingdom
May 11, 2010 Narrowband VHF/UHF CXR receiver has better than -118 dBm usable calling sensitivity and draws 20 mA from 3.1-15 V rail. Matching CXT transmitter is offered in 10 or 100 mW version to meet specific band regulations. Providing remote control switch function without need for external circuitry, modules support data rates of up to 5 kbps and provide 32 frequency channel operation in UK, Australia, and EU frequency bands. Units have range of up to 1 km in operating temperatures from -20 to +55°C.

Allegro MicroSystems Inc.    Worcester, MA 01615
May 11, 2010 Equipped with built-in translator, Models A4982, A4984, A4985, and A4988 utilize STEP and Direction interface to operate bipolar stepper motors in full, ½, ¼, 1/8, and 1/16 step modes with output drive capacity up to 35 V and ±2 A. Fixed off-time current regulator operates in slow or mixed decay modes, while internal synchronous rectification control circuitry optimizes power dissipation during PWM operation. All packages are lead-free with 100% matte tin-plated lead frames.

Alliance Plastics    Erie, PA 16510
May 11, 2010 Wide flange threaded plugs are manufactured with nylon material, which absorbs paint, while wide flange keeps paint flakes away from hole during removal. Nitrile gasket seals plug to mating surface for liquid tight seal. Applied or removed by hand, screwdriver, or torque wrench, units can be used in intermittent temperatures up to 230°F.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
May 11, 2010 Incorporating Fanuc M-10iA 6-axis robot with pneumatic gripper that serves as component handler, Model RB-TRR-900 is suited for surface preparation, shot peening, and cosmetic finishing operations. Single suction-blast gun or pressure-blast nozzle is rigidly bracketed in fixed position inside 42 x 42 x 42 in. blast chamber. Guide rails form track extension on which transfer cart bearing tray full of components is moved in and out of blast enclosure by precision linear actuator.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
May 11, 2010 Measuring 1 m long, Electrical Busbar System can be cut to any length and includes supports that enable 2 or 3 busbars to be directly mounted to DIN rail. Wiring terminals eliminate need for drilling and tapping of bubar and crimping of terminals on ends of wires. Designed to handle 20 AWG wires to 1/0 cable, terminals feature color-coded plastic housings that can be used to visually designate lead type.

TE Connectivity Ltd.    Berwyn, PA 19312
May 11, 2010 Solderless LED Socket, Type CM, facilitates integration of Cree XLamp® MP-L(TM) multichip LED into light fixtures. Allowing ample optical clearance for 120° beam angle, socket has snap-on connect feature for LEDIL Tyra series reflectors, which offers directional optics in 18, 30, and 50° beam angles. Solderless solution minimizes assembly time while providing repeatable and separable termination. Versions for wire or board applications are available.

Omega Engineering, Inc.    Stamford, CT 06907
May 11, 2010 Measuring 8.5 x 4.7 x 1.4 in., portable HHB1600 comes with 3.3 ft probe, 3.5 in. monitor, camera, and video. Hand-held system is CE marked and automatically adjusts illumination intensity to environment. Respectively, horizontal, vertical, and diagonal field angles are 46°, 34°, and 56°, and depth of field is 0.4-2.4 in. Still images in JPEG format up to 640 x 480 and video in ASF format up to 320 x 240 can be recorded directly to included 2G SD card.

New Focus, Inc.    San Jose, CA 95134
May 11, 2010 VAMP(TM) Series semiconductor tapered amplifiers suits high-power tunable and fixed-wavelength applications. Design includes output isolation, over-current protection, and input seed monitoring in every amplifier to ensure stable and robust operation. These features also protect the chip from self lasing and other hazardous operating conditions. Amplifier series produces in excess of 1 W of tunable signal frequency radiation when seeded with appropriate source.

Dymax Corp.    Torrington, CT 06790
May 11, 2010 ACCU-CAL(TM) 50-LED radiometer can measure energy levels emitted from 4, 5, and 8 mm lightguides and LED flood lamps. With spectral sensitivity range between 350-450 nm and intensity measurement from 1 mW/cm² to 40 W/cm², CE marked unit is suited for measuring LED curing-source energy levels. Photo-sensor assembly provides repeatable measurements and protection from high temperatures associated with some LED systems.

PKP Process Instruments, Inc.,    Hudson, MA 01748
May 11, 2010 Available for pipe sizes of 1-2 in. with turndown ratios of up to 50:1, DR05 sensors measure flow of water and substances similar to water. Polypropylene pipe fitted with paddlewheel extends into area of flow and is set into rotation by flowing liquid. Rotary motion, sensed by Hall sensor, is output as series of pulses converted into 4-20 mA analog signal or into 2 limit contacts by optional electronics. Wetted materials include a PP housing, ECTFE rotor, and ceramic axels and bearings.

MindTouch    San Diego, CA 92101
May 11, 2010 MindTouch Collaboration Platform enables companies that service large numbers of online users to optimize rich media, data transfer, and accelerated application development within their collaboration experience. Extendible WOA/REST architecture enables seamless employment of performance boosting features through code library edition. Via Big Data capabilities, users can manage volumes of digital media files and/or millions of site visitors.

Burton Medical Products Corp.    Chatsworth, CA 91311
May 11, 2010 Offered with floor, wall, single, and double ceiling mounting options, AIM-200® helps enhance physician's vision during diagnostic and minor surgery applications. Its 360° limitless arm-and-mounting-system-rotation provides 63 in. max reach and 10 ft dia., while three 35 W IRC halogen bulbs together produce 90,000 lux at distance of 1 m. With CRI of 96 and color temperature of 3700K, light has Y-shaped design that minimizes obstruction of light into surgical field.

Entrust, Inc.    Addison, TX 75001
May 11, 2010 Entrust IdentityGuard v9.3 includes Entrust IdentityGuard Mobile application, which authenticates consumer, corporate, or enterprise users via smartphone device. Deployment of different authenticators based on unique requirements helps increase user acceptance and reduce usability impact. Capabilities help defeat malware threats such as man-in-the-browser while also providing strong authentication for enterprise VPN access, Web portal access, or corporate desktop security.

ICON Supply Chain Management    Santa Clara, CA 95051
May 11, 2010 Designed for supply chain and sales/operations planning and collaboration, ICON-SCP v10 gives companies visibility they need to manage risk and extreme variables in global supply chain. Flexible planning tools can take unforeseen issues, analyze data, re-configure, and produce new plan within minutes. Using demand planning and collaboration tools, companies can calculate optimal inventory buffers based on target service levels, replenishment lead-time, and historical shifts in demand.

IntelliCorp Inc.    Mountain View, CA 94040
May 11, 2010 Using discovery, comparison, and change implication of Enhancement Objects and Enhancement Spots, LiveCompare(TM) v2.3 helps users increase data collection, information reporting, and workflow integration by extending reach into SAP system. Solution automatically identifies what is changing in regards to SAP lifecycle activity as well as impact of said change. Along with client and server level web services support, software offers project management services via Basecamp integration.

Synopsys, Inc.    Mountain View, CA 94043 4033
May 11, 2010 Supporting DDR2, DDR3, Mobile DDR, and LPDDR2 SDRAM standards, DesignWare® Universal DDR Protocol and Memory Controllers enable integration of multiple DDR interfaces into one design servicing range of products. Controller accepts memory access requests from up to 32 application-side host ports, each of which can be configured independently to be synchronous or asynchronous to controller clock. Single-port protocol controller optimizes memory channel bandwidth utilization with reduced latency.

OpTier Inc.    New York,, NY 10010
May 11, 2010 Offering visibility in SOA, virtualization, and cloud computing environments, OpTier Experience Manager Plus BTM Starter Edition helps organizations make link between end-user experience monitoring and BTM for effective service performance management. Installed in hours, program utilizes 100% of information to identify load balancing/authentication issues and provide full transactional data. It also provides real-time topology map from end user through Web server.

Plurality Ltd.    Netanya 42300  Israel
May 11, 2010 HyperCore(TM) 256 multicore processor simplifies code compilation and offers hardware-based synchronizer-scheduler which delivers performance that scales linearly with number of cores. Suited for wireless, networking, and Cloud computing applications, it acts as performance extension to x86, PowerPC, MIPS, and ARM processors. Reconfigurable acceleration coprocessor also offers development environment and task-oriented programming model that enable rapid product development.