Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 12, 2009 Model XMC-FPGA05F FPGA XMC/PMC module incorporates Xilinx® Virtex®-5 FPGA with 4 front panel, single or multimode fiber-optic transceivers supporting speeds including 2.0, 2.125, 2.5, and 3.125 Gbps. Data flow is handled by IP core for protocols such as Aurora(TM) or Serial FPDP. Unit includes 4 banks of 128 MB DDR2 SDRAM memory, with bandwidth near 1 Gpbs; DMA controllers; and onboard Flash. Air- or conduction-cooled versions are available.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 12, 2009 Offered in 3 x 3 mm package, 16-bit MAX5138 and 12-bit MAX5139 integrate voltage reference and are pin- and software-compatible. Power-down feature minimizes power consumption to 200 nA, while internal buffer optimizes load regulation and transition-glitch suppression for DAC output. Pin-programmable, zero/midscale DAC output ensures output powers up to desired state, even during loss-of-power event. Both converters accept 3-wire SPI(TM)-/QSPI(TM)-/MICROWIRE(TM)-/DSP-compatible serial interface.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 12, 2009 Programmable iSensor® ADIS16240 triple-axis shock and impact sensor is optimized for user configurability while detecting and storing critical events for subsequent analysis. With usable bandwidth up to 1.6 kHz, it consumes less than 1 mA in continuous sampling mode. Programmable iSensor® ADIS16220 digital vibration sensor lets designers automatically capture profiles of subtle vibration shifts in industrial applications that require wide-bandwidth (22 kHz) sensing.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 12, 2009 Supplied in 4 x 4 mm TQFN package, MAX14521E features ±15 kV ESD protection and utilizes inductor-based boost converter to generate 300 VP-P (max) voltage for optimal electroluminescent (EL) lamp brightness. I²C interface is included for adjusting settings such as output voltage, frequency, boost frequency, and waveform shape, while acoustic-noise-reduction circuit enables quiet EL backlight operation as well as bright, efficient output. Driver allows independent control of each lamp.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 12, 2009 With output current up to 2.5 A and 0.5 A, respectively, Models VO3120 and VO3150A each consist of LED optically coupled to integrated circuit with power output stage operating from 15-32 V. Units are suited for directly driving IGBTs with ratings up to 800 V and 50 A for VO3120 and 20 A for VO3150A. Offered in lead-free and RoHS-compliant packages, drivers feature low power consumption of 2.5 mA and max ambient operating temperature of +110°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 12, 2009 Housed in eSMP(TM) series MicroSMP package measuring 2.5 x 1.3 x 0.65 mm, MSE1Px Series offers choice of 100, 200, 400, and 600 V reverse voltage ratings. All models have average forward current capability of 1 A and forward surge capability of 20 A. Lead- and halogen-free, RoHS-compliant rectifiers feature max junction temperature of 175°C and MSL moisture sensitivity level of 1. Units are suited for automotive and industrial control and sensor units, as well as lighting systems.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 12, 2009 Sfernice LPS300, LPS600, and LPS800 thick film resistors are, respectively, 300, 600, and 800 W non-inductive (less than 0.1 µH) products with resistance range of 0.3 W to 900 kW. Each has 57 x 60 mm footprint and weighs 83 g. Power capabilities and dielectric strength of 12 kVRMS make devices suited for power supply, inverter, converter, snubber, and discharge resistor applications. Thermal resistance at rated power and +85°C is 0.112°C/W junction-to-case.

American Portwell Technology    Fremont, CA 94538
Aug 12, 2009 Based on Intel G41 Express chipset, Model CAR-3000 1U rack-mount communication appliance supports various Intel® CPUs. It also supports dual-channel DDR3 1333/1066 memory up to 4 GB, 3.5 in. or 2 x 2.5 in. SATA HDD or SSD, and up to 6 GbE RJ45 onboard ports with 2 software controlled bypass segments. Expansion is enabled by PCI-E x8 interface, while fiber and copper port connections include dual-port 10G readiness. Several 2 x 16 pixel character LCD display module options are available.

GE Intelligent Platforms    Charlottesville, VA 22911
Aug 12, 2009 Offering compilation of pre-configured graphic objects and screens as well as integrated workspace toolbar, OEM Solutions Pack for Proficy® iFIX 5.0 accelerates iFIX application development and enables duplication across many devices and/or machines for consistency and implementation of data standards, such as OMAC. Trending components and pre-built screens are designed for touch screen operation and enable troubleshooting and in-depth visualization of machine data on plant floor.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Aug 12, 2009 Featuring cutting chambers optimized for handling bulky solids, TASKMASTER® TITAN (TM22000) has low headloss design and employs 2 counter-rotating shafts. One cutter stack intermeshes with second of greater diameter, promoting efficient feeding, reducing bulky solids, and helping flow pass through freely. Machine is also available as TITAN DUPLEX, featuring 2X cutting area, 10 hp motor, and cycloidal gear drive. PLC-driven S260 automatic reversing control system is also included.

Alltec Corporation    Canton, NC 28716
Aug 12, 2009 Performing in any type of soil condition, TerraDyne® Electrolytic Grounding System (EGS) provides long-term protection from lightning strikes, electrical transients, static discharges, electro-magnetic interference, and other electrical hazards threatening sensitive electronic equipment. Offered in vertical and horizontal models, UL- and cUL-listed system is corrosion-resistant and produces effective, stable, year-round ground reference.

Dynabrade, Inc.    Clarence, NY 14031
Aug 12, 2009 Powered by 1.3 hp air motor that promotes smooth and controlled operation, Model 52657 may be used on various materials for sanding and deburring applications, surface conditioning, weld preparation, and removing paint/rust. Tool operates at 6,000 rpm and accepts 7 in. dia abrasive discs with 7/8 in. center hole. While vibration-dampening side handle is removable for left- or right-hand use, exhaust system rotates 360° to accommodate operator.

Ioxus    Oneonta, NY 13820
Aug 12, 2009 Electric Double Layer Capacitors and power modules provide energy storage, for maximum efficiency of hybrid electric vehicles, by recycling energy captured during braking. Used with batteries or other energy sources, units also minimize power drain from source. They are available as 2.7 V ultracapacitors and 2.3 V pseudo-capacitors and are suitable for military, transportation, and alternative energy applications.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 12, 2009 Featuring VxWorks 6.x BSP and Driver Suite supporting Workbench 3.x IDE, VPX6-185 enables integration of MILS (Multiple Independent Levels of Security) into deployed rugged systems, providing secure processing functionality in applications with space, weight, and power constraints. Other features include Freescale 8641 PowerPC processor, up to 2 GB DDR2 SDRAM controlled by dual 64-bit controllers, and Ethernet, SCSI, serial, USB 2.0, 1553, SATA, and TTL I/O capabilities.

ACTi Corporation    Taipei   Taiwan
Aug 12, 2009 Providing triple codec (H.264/MPEG-4/MJPEG) with 2 simultaneous streams, TCM-5311 1.25 megapixel CCD day/night IP camera can transmit 2 H.264 video streams at different video formats, frame rates, and resolutions. With frame rate of 30 frame/sec in HD720 (1,280 x 720) resolution, camera features mechanical IR-cut filter to increase IR light sensitivity for enhanced night vision. Changeable lens model offers certified 2.8-12 mm varifocal megapixel lens as optional accessory.

Detroit Precision Hommel    Rochester Hills, MI 48309
Aug 12, 2009 Providing high accuracy measurement of precision ID and OD of workpieces, Matchscan MS500 Basic suits applications such as fuel injector assemblies, cam and crank bores in engine blocks, where precision fit is essential for correct part function. It includes 17 in. touch screen computer, CMZ32 software for automatic measurement with multi-language capabilities, and SPC32 software for statistical control of measurement processes. Unit can also perform sub-micron part classification.

Malvern Instruments Ltd    Malvern Worcestershire WR14 1XZ  United Kingdom
Aug 12, 2009 Suited for off-,on-, and at-line cement analysis, laser diffraction particle sizing system Insitec Cement LabSizer offers high performance for large volume dry powder samples and delivers consistent particle size measurements. System can measure samples from 5 g to more than 150 g. Providing tool-free access to both sample feeder and measurement cell, modular instrument is compatible with any user set-up.

Jet Edge    St. Michael, MN 55376
Aug 12, 2009 Suited for precision waterjet cutting, water blasting, cleaning, and surface preparation applications, 100 hp 60,000 psi, iP60-100S single intensifier waterjet pump produces 2.0 gpm of ultra-high pressure water. It features tie-rod design with no threaded cylinder, end caps, or hydraulic cylinder, and matched-metal components for preventing galling of hydraulic system components. Rugged hydraulic center section of pump incorporates high duty cycle rated piston seal and wear rings.

Nameplates For Industry, Inc.    New Bedford, MA 02745
Aug 12, 2009 Suited for equipment subject to frequent washdown or exposure to chemicals, custom NFi Water- and Chemical-Resistant Labels can be made from conformable and rigid materials including polyester, PVC, powder-coated metal or wood, and Lexan® polycarbonate, with adhesives engineered to match application. Labels feature subsurface printing to protect images and data and can be produced in multiple colors, shapes, and sizes. They can also be manufactured to conform to NEMA 4 requirements.

Dialight Corp.    Farmingdale, NJ 07727
Aug 12, 2009 Using ultra high brightness LEDs, Powerwhite® AR111 and MR16 fully modular circular arrays are retro-fittable to conventional lighting fixtures. They are completely free of hazardous materials and can perform for over 50,000 hr. Solid state LED modules are available in choice of colors and color temperatures.