Maxim Integrated Products    Sunnyvale, CA 94086
Aug 14, 2009 Models MAX14529E and MAX14530E provide high-current USB charger detection and ±15 kV ESD protection for portable devices. Offered in 1.5 x 2 mm, 1-bump wafer-level package, they include MOSFET to protect low-voltage systems against voltage faults up to 28 V. Units operate over -40 to +85°C temperature range. Devices are suited for cell phones, media players, PDAs, and other space-constrained applications.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 14, 2009 Housed in 1.4 x 1.8 mm UTQFN package, Models MAX4995A/MAX4995AL/MAX4995B/MAX4995C/MAX4995AF feature ±10% accurate current limit, protecting host devices against faulty load conditions. To handle overcurrent events, Models MAX4995A/MAX4995AL/MAX4995AF go into autoretry mode, while Model MAX4995B latches off switch, and Model MAX4995C places device in continuous current-limit mode. All devices provide reverse-current protection, which prevents current from being dumped back into source.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 14, 2009 Conduction-cooled VPX3-FSM (Flash Storage Module) provides 256 GB SLC NAND flash storage in 3U VPX or VPX-REDI form factor with 1.0 in. pitch. It includes NIST-certified, 256-bit AES data encryption capability and memory cells rated for 100,000+ write cycles. On-board flash memory is arranged as four 64 GB banks and can be configured to appear to host SBC as 4 separate SATA drives or one SATA drive. Read/write performance is rated at 160 MBps when configured as RAID 0.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 14, 2009 Model SiHP18N50C with TO-220, SiHF18N50C with TO-220 FULLPAK, and SiHG20N50C with TO-247 packages provide 500 V rating and 0.270 W maximum RDS(on) at 10 V gate drive. Lead-free MOSFETs also feature gate charge of 65 nC, with gate charge x RDS(on) of 17.75 nC. Peak current handling is 72 A pulsed and 18 A continuous. High single-pulse and repetitive avalanche energy capabilities are included.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 14, 2009 Able to support up to 1,500 MSps data throughput per channel, ADC513 FPGA Mezzanine Card (FMC/VITA 57) module accelerates and facilitates integration of FPGAs into embedded system design. This 1.5 GSps, 8-bit ADC card, which supports 6 GBps data throughput, eliminates data bottlenecks to increase DSP subsystem performance by routing high-speed ADC I/O directly to host board's FPGAs via FMC connector. Air- and conduction-cooled versions are available.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 14, 2009 Model SiR494DP 12 V TrenchFET® Gen III Power MOSFET, also featuring 1.7 mW at 4.5 V gate drive, offers RDS(on) x gate charge of 85 nC at 4.5 V. Used as low-side MOSFET in synchronous buck converters with input of 3.3-5 V, n-channel MOSFET provides VGS of ±20 V. It is integrated into PowerPAK® SO-8 package, is lead- and halogen-free, and is compliant with RoHS Directive 2002/96/EC.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 14, 2009 Housed in 8518 size package, Power Metal Strip® WSBS8518 produces resistance values of 100, 125, and 250 µW with tolerance of 5.0%. All-welded construction allows operation with continuous currents as high as 600 A. With inductance values less than 5 nH and thermal EMF less than 3 µV/°C, resistor is suited for battery shunt applications in gas, diesel, hybrid, and electric cars, trucks, and scooters, as well as electric forklifts and other industrial applications.

Cicoil Corp.    Valencia, CA 91355
Aug 14, 2009 Cat 5e cable, featuring flexible flat profile and extruded silicone encapsulation, meets/exceeds all electrical and signal requirements for Cat 5e standard. Rated over -65 to +260°C range, flame-resistant and submersible cable is resistant to steam, salt water, and de-ionized water. It exhibits repeated bend radius of 0.9 in. and has life cycle that exceeds 10,000,000 repetitive flexing. Rated for radiation exposure, cable is resistant to chemicals, acid, oils, alcohol, and ozone.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
Aug 14, 2009 In addition to options for creation of anatomical orthotics, OrthoModel includes method to define heel lift, arch definition, and flexibility when creating orthotics from standard models. Smooth blend can be created between contact area of orthotic and inside of shoe, ensuring that foot is matched correctly with surface of orthotic while walking. Operator can input prescriptions for number of patients, and software can generate all required designs in continuous series of calculations.

Fujinon, Inc.    Wayne, NJ 07470
Aug 14, 2009 Designed for hard cameras (ENG cameras that use system expanders), XA50X9.5B ESM-D suits smaller venues and applications that do not require extremely high magnification. It offers 50X magnification and 9.5-475 mm focal length, and remote control 2X extender is standard. While max relative aperture is 1.7 from 9.5-311 mm and 2.6 at 475 mm, min object distance is 9.8 ft from front of lens. Also, Digi Power digital servo control system enhances zoom and focus performance.

Aimtec, Inc.    Dollard Des Ormeaux, QC H9G3B9  Canada
Aug 14, 2009 Supplied in SMT packages, all models of series AM2B-NZ(DIP16) and select models of series AM2L-NZ(SMD) feature I/O isolation of 6,000 Vdc or equivalent of 3,000 Vac isolation for AC applications. Associated safety factor provides protection against channel-to-channel or cross-channel interference. Both series feature nominal input voltages of 5, 12, and 24 Vdc, stepping up or down to output voltages of 5, 12, and 15 Vdc. Short circuit protection is standard on all outputs.

Lanner Electronics Inc.    Sijhih City Taipei 221  Taiwan
Aug 14, 2009 Built on Intel 5520 Tylersburg chipset and Intel Xeon 5500 Nehalem processor, 1U rack mount Model FW-8875 includes up to 24 GB tri-channel DDR3 memory, two 2.5 in. drive bays, 4 SATA ports, CompactFlash socket for storage, and up to 20 network ports via 3 network module bays. Unit offers platform for enterprise-class network security and acceleration solutions such as UTM, VPN firewall, WAN acceleration, and gateway antivirus/anti-spam/URL filtering appliances.

GL Communications Inc.    Gaithersburg, MD 20877
Aug 14, 2009 Supporting GSM A and GSM Abis emulation, MAPS(TM) Message Automation and Protocol Simulation Software can simulate BSSMAP and DTAP messages and signaling specification as defined by 3GPP standards. Interfaces support testing network elements MSC and BSS, error tracking, regression testing, load testing, and generation of GSM traffic. Message Editor, Script Editor, and Profile Editor allow new scenarios to be created from existing scenarios using BSSMAP and DTAP messages and parameters.

TQC BV    Zevenhuizen   Netherlands
Aug 14, 2009 Used for inspecting pre-treatment quality during protective coating jobs, SP3200 kit assesses quantity and size of dust particles on blast-cleaned surfaces prior to painting according to ISO8502-3 standard. Ergonomic solution contains all required tools, such as specified adhesive tape, pictorial standard to define dust quantity and size, illuminated magnifier, scissors, tape-transfer sheet, and set of report forms for permanent record keeping of sample findings.

Balluff, Inc.    Florence, KY 41042-0937
Aug 14, 2009 Designed as extension of present sensor-based error proofing system, Sharpshooter provides part or feature presence/absence detection and inspection, position detection, plus dimension verification. All configured inspections are compensated for part rotation, and output logic functionality provides ability to link any tool or combination of tools to any output. Solution is capable of infinite part position recognition and uses ConVis v1.2 configuration and emulation software.

Schneider Packaging Equipment Co., Inc.    Brewerton, NY 13029 0890
Aug 14, 2009 Designed to pack rigid cases, bags, cartons, or trayed products, Model HVCP utilizes FANUC robotic arms with HMI to facilitate changeover and eliminate programming. System can orient product vertically, horizontally, or combination of both, with press of button. Positive case erection optimizes system tolerance to case variations, while open design allows access for jam recovery, and standard Ethernet port enables remote monitoring and diagnosis.

Winters Instruments    Buffalo, NY 14150
Aug 14, 2009 Available with 4.5 or 6 in. dial, PDT Differential Gauge Series indicates pressure drops, which may signify when filtration in pumps or other equipment needs to be changed or serviced due to clogging. Rated ±1% ASME Grade 1A, gauges feature brass or stainless steel internal system and single aluminum micrometer pointer to indicate pressure difference. Pressure sources are measured by 2 independent but matched Bourdon tubes, housed within aluminum case.

Proceq USA, Inc.    Aliquippa, PA 15001
Aug 14, 2009 Combining adjustable tripod base with manual hydraulic loading system and direct-reading, digital pressure gauge, DYNA Series determines adhesion strength of coatings on concrete surfaces and tensile strength of concrete repairs. Integrated gauge features user-selectable display of applied forces in English or Metric units, as well as directly in tensile stress, based on 2 in. test area. Providing peak-hold feature, display gives min/max values until reset by operator.

OSRAM Opto Semiconductor    San Jose, CA 95134
Aug 14, 2009 With typical luminous intensity of 1.9 cd at 20 mA, TopLED Black Series with lens suits display applications with high ambient lighting conditions. Black package ensures there is hardly any reflection from incident light, and thin-film chip ensures high luminous efficiency. Available in red and yellow, units have beam angle of 60°. Targeted applications include information displays for traffic and public transportation systems and price changing displays.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Aug 14, 2009 With on-board FPGA and high speed PCIe bus, 4-lane Agilent U1084A Acqiris provides data throughput at up to 650 MB/sec. Dual-channel, 8-bit PCIe digitizer card offers 4 GS/sec sampling rates, 1.5 GHz bandwidth, and incorporates 15 psec trigger time interpolator for accurate timing measurement. On-the-fly signal averaging process reduces random noise effects, and improves signal to noise ratio, while noise suppression algorithm reduces synchronous noise.