Curtiss-Wright Controls Embedded Computing    San Diego, CA 92121-1773
Aug 18, 2009 Based on 2.26 GHz SP9300 Intel® Core(TM) 2 Duo processor with 6 MB L2 cache, Model VPX3-1252 is suited for harsh-environment air- and conduction-cooled aerospace and defense applications. Unit is available with up to 4 GB of 1,067 MHz DDR3 SDRAM and comes with dual Gigabit Ethernet, 3 USB 2.0 ports, and XMC site supported with 8 lanes of PCIe. Occupying single 3U 0.8 in. slot, board may be used for upgrading existing CompactPCI systems in same footprint.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 18, 2009 Combining active-input-termination LNA, VGA, anti-alias filter, and I/Q mixer continuous-wave Doppler beamformer in one monolithic device, Model MAX2078 supports input impedances of 50, 100, 200, and 1,000 W. Unit can achieve full receiver noise figure of 2.4 dB with 200 W input impedance termination, while consuming less than 65 mW per channel. Device boasts SNR of 140 dBc/Hz at 1 kHz from 5 MHz clutter signal, and 23 nV cascaded output-referred noise.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 18, 2009 Sensitive to FM, VHF, and L-band frequency ranges, MAX2172 features FM sensitivity of -111 dBm. Integrated tracking filter eliminates interference between bands and unit includes mixers and synthesized local oscillator. Received-signal-strength indicator provides ±2 dB accuracy and outputs measured level in digital form through I²C bus. Drawing 61 mA from 3 V supply, IC utilizes standard 2.048 MHz IF frequency and is specified over -40 to +85°C temperature range.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 18, 2009 Designed to withstand harsh operating conditions in automotive applications, MAX9532 drives standard-definition video connections to in-dash or rear-seat automotive display. Unit integrates short-to-battery protection up to 18 V on video output, eliminating need for external series resistor. Operating from 2.7-3.6 V supply, amplifier employs DirectDrive® technology, which automatically removes dc offset, places video black level at ground, and puts sync-tip below ground.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 18, 2009 Suited for ±15 V signal switching, 8-channel DG508B and dual 4-channel DG509B are designed for high-precision multiplexing in A-to-D networks. Both CMOS analog units are rated up to 44 V, with rail-to-rail analog capability, and can be operated in dual or single supply configuration. Power consumption is 10 µA at 25°C typ and multiplexers achieve -3 dB bandwidth greater than 200 MHz with crosstalk and off-isolation of -40 dB at 100 MHz. They operate in temperatures from -40 to +125°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 18, 2009 Measuring 0.455 x 0.275 in. with 0.095 in. profile, Power Metal Strip® WSR5 offers resistance values from 1-300 mW with ±1% tolerance and 10-300 mW with ±0.5% tolerance. Inductance values range from 0.5-5 nH. Featuring all-welded construction and molded, high-temperature encapsulation with integrated heat sink, current sensing resistor operates from -65 to +275°C. Applications include computer, telecommunications, and automotive systems.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 18, 2009 Suited for high-frequency applications, Models MUH1PB, MUH1PC, and MUH1PD respectively offer 100, 150, and 200 V reverse voltage ratings and come in eSMP(TM) series MicroSMP package measuring 2.3 x 1.2 x 0.65 mm. Each features average forward current of 1 A, forward surge capability of 10 A, and leakage current of 1 µA. Built to be RoHS-compliant, halogen-free products have 25 nsec reverse recovery time, offer oxide planar chip junction, and are suited for automated placement.

Hall Research Technologies, Inc.    Tustin, CA 92780
Aug 18, 2009 Switch-Cat(TM) is available with add-on module (VSA-31-IP) that enables monitoring and control via IP. Containing IP module and GUI software, port-powered option inserts into RS-232 control signal path from A/V system to display (LCD or projector). IP Module connects to local network through standard network cable, and GUI software can be installed onto any computer on local network for asset management, monitoring, and control of multiple installations.

VIA Technologies, Inc.    Taipei 231  Taiwan
Aug 18, 2009 Designed for industrial and embedded applications in extreme environments, VIA EPIA N700-10EW Nano-ITX Board maintains absolute stability at temperatures ranging from -20 to 70°C. Fanless board is powered by 1 GHz VIA Eden ULV processor and VIA VX800 media system processor. Measuring 12 x 12 cm, VIA EPIA N700-10EW boasts solid state capacitors and supports up to 2 GB of DDR2 system memory. Two SATA connectors, USB 2.0, COM, and PCIe-based Gigabit LAN ports are available through onboard I/O.

Stealth Computer Corp.    Woodbridge, ON L4L 8H2  Canada
Aug 18, 2009 Designed to handle demanding environments in both indoor and outdoor/field applications, IP54/NEMA 13-rated Notebook Warrior NW-2000 is encapsulated in magnesium alloy chassis with built-in weather protective doors for all I/O ports. Powered by Intel Memrom processor, computer includes sunlight viewable 13.3 in. WXGA LCD screen, touch screen sensor, and 86-key backlit keyboard. For connectivity, unit features 802.11a/g/n, Bluetooth V2.0, 10/100/1000 Mbps LAN, and RJ11 modem.

Ermanco, Inc.    Spring Lake, MI 49456 9652
Aug 18, 2009 Measuring 60 ft high and 38 ft deep, Commissioner XL Vertical Storage System provides order fulfillment and sortation capabilities in ambient, refrigerated, and freezer environments. Load handler stores and retrieves loads by traveling horizontally along lifting beam, which moves up and down to correct storage position. System is suited for WIP buffering, product staging, order consolidation, order picking, and sortation prior to shipping or palletizing.

MasterMover® International Limited    Derbyshire   United Kingdom
Aug 18, 2009 Bed Mover enables one porter to maneuver any type of hospital bed with minimal effort. Attached to bed via coupling mechanism that connects to casters, product features power-steering, auto-braking, emergency stop, and variable-speed control. Design fits into hospital elevators and promotes maneuverability in tight areas. Also capable of moving bariatric patients, mover can be cleaned or wiped down to support infection control and is finished in white, anti-microbial paint.

PartMaker, Inc.    Fort Washington, PA 19034
Aug 18, 2009 Used for programming CNC mills, lathes, WireEDMs, turn-mill centers, and Swiss-type lathes, PartMaker v2010 includes features for optimized visualization of thread whirling, 2½-axis milling functionality, and programming of complex parts. Direct interface option to PowerMILL is offered for all complex 5-axis machining strategies supported by PowerMILL, including blade and blisk machining, as well as sophisticated 3-axis strategies. Various other milling strategies are also included.

Weidmuller, Inc.    Richmond, VA 23236
Aug 18, 2009 Available for most industrial PLCs and Micro PLCs, pre-assembled specific Interface Cable Assemblies feature jacketed round cable that is attached directly to original connectors for specific PLC model I/O card. Several connector styles are available to connect to PLC interface boards, including flat connectors with strain relief and polarized connections, shielded Sub-D connector with shielded 24 AWG cabling, and industrial connectors rated up to 250 V and 8 A.

Recoveronix Ltd.    Tallinn 12616  Estonia
Aug 18, 2009 Effective on heavily damaged email databases, Visual Recovery for Exchange Server provides users with granular data recovery tool for all Microsoft Exchange Server versions up to 2007. Typical time required to prepare one 16 Gb EDB file for browsing is less than 10 min. After initial database scan is completed, data is presented via folder tree and lists of messages. Folders and individual messages can be marked for subsequent export into PST files.

DEK    Rolling Meadows, IL 60006
Aug 18, 2009 With Cp greater than 2@±12.5 µm and 7 µm Total Thickness Variation, process capability of its DirEKt Coat(TM) wafer coating technology effectively addresses needs of current and future thinned wafer products. Backside coating technique, capable of depositing 25 µm thick coatings onto wafers as thin as 150 µm, promotes accelerated processing times and optimizes chip footprints. Parallel process can deposit materials on wafers as large as 200 mm in one stroke, increasing processing speed.

Endicott Research Group, Inc.    Endicott, NY 13761
Aug 18, 2009 Providing everything needed to get panel, backlight, and driver fully operational, Smart Kit(TM) Development Kits include ERG LED driver card, flying lead input harness, DigitalView® to ERG plug-and-play input harness, and direct mate LED driver-to-LCD interconnect wiring harness. All components come in 8.5 x 5 in. polyethylene bag labeled with manufacturer and model number of LCD panel as well as part numbers for driver card and harnesses.

KD Scientific Inc.    Holliston, MA 01746
Aug 18, 2009 Offering alternative for micro reliable infusions, EZFlow 2040 features 2.7 in. OLED with separate display that shows volume delivered, volume rate, time, and date. Portable pump offers 5 preset languages, self-diagnostic program that initiates each time pump is powered on, and AC power source with battery backup of approximately 3 hours continuous operation at 25 ml/hr. Unit also includes built-in rechargeable Ni-MH battery and RS232 serial port for data communication.

seepex, Inc.    Enon, OH 45323
Aug 18, 2009 Covering performance band of 0.08-4.7 gpm and pressures to 360 psi, Vector-Type Drive integrates progressive cavity pump with single reduction gear box, 4-pole TEFC inverter-rated ½ hp electric induction motor, and variable frequency drive in NEMA 4 enclosure. Integrated system offers speed range of 20-600 rpm. Featuring H-O-A switch with 10-turn potentiometer for manual control, drive will accept 4-20 mA process signal through standard ½ in. UNF-connector.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Aug 18, 2009 Made of engineered polymer with stainless steel fasteners, slit type S50TLC Inch and Metric Couplings are available in sizes 13, 19, and 25, and can replace stainless/aluminum slit type couplings. There is no windup or backlash or any derating for reversing applications. To insure tight fit between shaft and coupling, metal screw-to-metal nut is used. Offered in lengths from .710-1.400 in. with bore sizes from .125-.500 in., couplings have temperature range of -4 to +284°F.