Seaview    Lynnwood, WA 98087-1524
Feb 07, 2012 Purpose built for harsh marine environment, Modular Mounts secure electronics for optimized satellite reception and radar performance while underway. Units consist of anodized aluminum plate that is pre-drilled with several hole patterns. To allow for seamless look, UV stable white ABS plastic coating fills holes, creating dimple template for boaters or installers to drill only holes required. Mounts support closed radomes and open array radars as well as most satellite domes.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Feb 07, 2012 Trace Source(TM) Configurable Diffusion Tubes extend range of compounds that can be used to include subliming solids and viscous liquids. Removable reservoir allows filling with capillary removed, so component compound can be any consistency. Additionally, variety of pre-configured and tested capillaries can be interchangeably fitted to reservoir to adjust range of concentrations obtainable.

SAS Automation, Ltd.    Xenia, OH 45385
Feb 07, 2012 Used when sprues and runner systems do not stay on ejector pins after ejection from mold, GSZ Spring Loaded Sprue Plier Arm enables GRZ 20-16... Sprue/Part Pliers to absorb ejector stroke of mold. This inline spring arm has end ported for quick-touch pneumatic hose connectors and is available with clampable and threaded shafts. Latter includes jam nut and lock washers for plate mounting.

STMicroelectronics    Lexington, MA 02421
Feb 07, 2012 Supplied in 3 x 3 mm package, STOD13AS is produced using Silicon On Insulator process technology and integrates step-up and inverting DC/DC converters needed to generate positive and negative supplies on same chip. Immunity to cellphone communication noise produces consistent, flicker-free display, while Enable pin and pulse-skipping operation promote power conservation. Along with 85% typ efficiency, chip features 250 mA output current capability and 1.5 MHz operating frequency.

Lowell Corp.    West Boylston, MA 01583
Feb 07, 2012 As 2-stage tool, Porter-Ferguson SM0014T Mini Ram provides auto body repair shops versatility when tackling jobs such as straightening frame rails and motor mounts. Height is 2 5/16 in. with piston fully retracted, 3 5/6 in. with first stage extended, and 4 5/16 in. when fully extended. Built for rough duty, product has max capacity of 4 ton for stage 1 and 1 ton for stage 2. Drop-forged base gives tool stable footing, and angled port for minimizing hydraulic connection problems.

DigitalPersona, Inc.    Redwood City, CA 94063
Feb 07, 2012 DigitalPersona® Pro Enterprise lets organizations mix and match different ways of securely identifying themselves to MS Windows® and applications, from PINs, passwords, and smartcards to biometrics, contactless proximity cards, and Bluetooth® phones. Managed from Active Directory, solution addresses mandates for strong authentication and protected access to sensitive information. Specifically, functionality covers ability to define, deploy, enforce, and report upon authentication policies.

Fluke Corp.    Everett, WA 98203
Feb 07, 2012 Fluke® 700G Series Precision Pressure Test Gauges can measure -14 to 15 psi with resolution of 0.001 psi (model 700G04) to -14 to 10,000 psi with 1 psi resolution (model 700G31) with 0.05% total measurement uncertainty for one year. Equipped with backlit display, instruments can log up to 8,493 pressure measurements when used in conjunction with 700G/TRACK software and feature ¼ in. NPT to ¼ in. ISO adapter for connections. Products carry CSA and ATEX approvals.

Henkel Corporation    Rocky Hill, CT 06067
Feb 07, 2012 Designed for locking and sealing threaded fasteners, Loctite® 2400NA(TM) and 2700NA(TM) have MSDS health rating of 1 and are formulated to enhance occupational health and safety by eliminating allergic skin, CMR, and Prop 65 hazards. Loctite 2400NA Blue Threadlocker has medium-strength, general-purpose formulation intended for use on fasteners from ¼-¾ in. dia. Loctite 2700NA Red Threadlocker offers high-strength, general-purpose formulation for use on fasteners up to ¾ in. dia.

Aremco Products, Inc.    Valley Cottage, NY 10989
Feb 07, 2012 Consisting of unfilled, 100% solids epoxy system, Aremco-Bond(TM) 526N can be used continuously at temperatures to 570°F. Product features volume resistivity of 4.0 x 10¹⁴ W-cm, dielectric strength of 450 V/mil, and dielectric constant of 3.01 at 1.0 Hz. Flexural and tensile strengths are 16,000 and 2,800 psi, respectively. With 1:1 mix ratio, epoxy provides mixed viscosity of 4,000 cP and pot life of 2.5 hr. Product adheres to ceramics, glass, metals, and plastics substrates.

Omega Engineering, Inc.    Stamford, CT 06907
Feb 07, 2012 With complete control system design, series CNI-CB120SB eliminates need to select, collect, and assemble separate components. Preconfigured panels are ready to install, requiring only supply power, load, and sensor hook-up. In addition to OMEGA® iSeries microprocessor-based controller with on/off, PID, and ramp/soak capabilities, features include tri-color display, thermocouple input jack, and M12 female connection for RTD or process inputs.

Baumer Ltd.    Southington, CT 06489 1534
Feb 07, 2012 Available in 2 and 4 megapixel versions, HXG Series transfers more than 100 fps, and uses Dual GigE technology to achieve bandwidth of 240 MB/sec. If one GigE line becomes disconnected, camera will continue to operate on remaining GigE line without power-down or reset. Resolutions up to 2,048 x 2,048 pixels ensure product quality by optically monitoring tiny details. With correlated double sampling, global shutter sensor guarantees sharp images and minimal readout noise.

CW Industries    Southampton, PA 18966
Feb 07, 2012 Rated at 5 A/contact, CCM-20, 21, 22, and 23 Series design allows optimized solder flow and for post solder visual inspection. Pin counts of 38, 50, 88, 108, and 132 are available with standard pin length of .250 ±0.025. Made of glass-filled polyester with beryllium copper alloy contacts that are gold-plated in mating area, high density connectors are suited for advanced missile systems, torpedoes, flight guidance systems, and other military electronics equipment.

Crystek Corp.    Fort Myers, FL 33907
Feb 07, 2012 Operating from DC to 26.5 GHz, CCSMA26.5-MM-086 Cable Assemblies provide attenuation value of 1.40 dB/ft at 26.5 GHz, and offer shielding effectiveness greater than 100 dB with operating temperature of -40 to +85°C. Units are constructed with silver-plated copper wire conductor, tin-soaked copper outer braid, PTFE dielectric, and stainless steel SMA connectors with gold-plated brass center pin. Available in 3-12 in. lengths with 0.086 in. OD, cables have minimum single bend radius of 0.125 in.

Aerotech, Inc.    Pittsburgh, PA 15238
Feb 07, 2012 Featuring non-contact design for maintenance-free operation, Model ABL1500 is driven by brushless linear servomotor with ironless forcer for zero cogging. Because there is no mechanical contact between moving elements, stage experiences no wear and service life is virtually unlimited with no lubrication. Air-bearing surface with opposing thin-film pressure accommodates heavy or offset loads with accuracy. Thin film fills small surface voids and allows for other irregularities.

Quicklogic Corporation    Sunnyvale, CA 94089
Feb 07, 2012 Background Color Compensator (BCC) allows pico projected content to be correctly viewed on projected surfaces of various colors. From on-system color light sensor or user-provided data, BCC technology gathers projected surface color characteristics and modifies projected content via on-chip proprietary color balancing algorithm. Tight coupling with Visual Enhancement Engine (VEE) technology allows color-compensated video to be further enhanced in terms of lumen efficiency.

Eurocom Corporation    Nepean K2E 7R4  Canada
Feb 07, 2012 Powered by NVIDIA GeForce GTX 560M and AMD Radeon HD 6990M and HD 6970M GPUs, EUROCOM Leopard 2.0 incorporates 18.4 in. FHD 1920 x 1080p LCD and THX TruStudio Pro. Notebook also features Auto Light Sensor technology, 24 GB RAM max, and 2nd Gen Intel Sandy Bridge i7 and i7 extreme processors with Intel HM 67 chipset. In addition to support for 4 storage drives (up to 4 TB in RAID 0/1/5/10), computer offers diverse range of interfaces to foster connectivity.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 07, 2012 Manufactured with advanced plating technique that puts precious metals only where needed, KOAXXA RF Interconnects have selective tin plating in solder region to promote soldering, and selective gold in contact region that helps meet industry standards. SMA units include panel mount; PCB straight and right-angle board mounts; and cable plugs and jackets with variety of flexible, semi-rigid, and conformable cable types.

Imco Carbide Tool Inc.    Perrysburg, OH 43552
Feb 07, 2012 Able to accommodate high-volume operations, POWoRoFEED® M924 features reinforced cutting edges, which are resistant to chipping and wear, as well as AlCrNX engineered coating that imparts heat protection. Both features provide extended tool life, while free cutting action, optimized rake and relief angles, and 38° helix enable higher feed rates.

Brüel & Kjær    Norcross, GA 30071-1588
Feb 07, 2012 Intended for PULSE analyzer system, PULSE v16.1 includes Source Path Contribution (SPC) technology that lets testers verify contributions of individual noise sources to exterior receivers. Indoor pass-by with contribution analysis is also included and is further supplemented by Time Insight software, which lets users listen to SPC results, switch paths on and off, listen over certain time or rpm range, compare different sets of results back-to-back, and apply filters.

Land Instruments International, Inc.    Newtown, PA 18940
Feb 07, 2012 With thermal imaging cameras placed to view all parts of vessel, including critical cone and dome sections, Critical Vessel Monitoring System measures surface temperature once every 16 cm². Each camera records over 110,000 individual measurements, ensuring that even smallest degradation can be detected. If breakout is detected, graphical software signals alarm. Integrated web interface allows visualization of vessel conditions from all plant locations.