Absopulse Electronics, Ltd.    Carp, ON K0A1L0  Canada
Feb 07, 2012 Supplied 7 x 7 x 12 in., chassis-mount enclosure, BAP 1K-U7712 Series does not require any fans or forced air cooling. Each model contains 2 internal modules, each capable of generating 500 W min for inherent redundancy. Products may be connected in parallel, and version with 2 independent, fully regulated outputs of 500 W each is also possible. Inputs range from 48-250 Vdc, regulated outputs range from 24-125 Vdc, and efficiency, depending on I/O configuration, is 85% (min).

Calex Mfg. Co., Inc.    Concord, CA 94520
Feb 07, 2012 Powered by 115 Vac, 230 Vac, or 11-30 Vdc, Model 4800 has built-in excitation supply capable of delivering up to 120 mA at 10 V, more than enough to drive four 350 W load cells. Input is isolated from output and both are isolated from supply voltage, eliminating unwanted ground loop problems. Measuring 9.0 x 7.25 x 2.2 in., transmitter offers output options of 0-20 mA or 0-10 V and 4-20 mA or 2-10 V. Overall accuracy over room temperature is less than ±0.1% of FS.

Ema Design Automation    Rochester, NY 14623
Feb 07, 2012 By creating well-structured database for shared usage by entire engineering team, CIS QuickStart for OrCAD Capture CIS users ensures part uniformity across all designs. App provides predefined database schema and setup utility. Database is automatically populated ensuring that symbol, footprint, and part information is accurate and available for use in centralized library. Because database contains all relevant component information, BOMs are created automatically and with minimal errors.

Franklin Adhesives & Polymers    Columbus, OH 43207
Feb 07, 2012 Developed primarily to bond pleated glass or paper media to frames of air intake panel filters, FilterFAB 150 blends high viscosity and high solids into thick formula that sets instantly and remains flexible over time. Fiber-filled, vinyl acrylic copolymer sealant is safe to use, non-flammable, produces no harmful fumes, and contains no added formaldehyde. With added antimicrobial agents, product stays bacteria-free long after it has cured.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Feb 07, 2012 Available in HDPE cartridge with 0.1 µm, 30 nm, and 20 nm retention ratings, GORE® PTFE Filters support fabrication of semiconductors and flat panel displays where optimum purity is critical. Combining low metal ion and organic extractables of all-HDPE cartridge, filters enable drop-in retention upgrade without sacrifice to existing system flow. PTFE membrane technology provides large, porous area available for fluid flow.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Feb 07, 2012 Utilizing replaceable electrode cartridges, MVS10 and MVS17 Ammonium pIon Sensors measure activity of free ammonium ions in solution in concentrations from 0.1-14,000 ppm over pH range from 2-8 pH. Model MVS10 consists of insertion- or immersion-style sensor for use in pipe tees, while Model MVS17 features valve-retractable design for insertion into pipe without interrupting process flow. Constructed of 316 SS, sensors operate over temperature range of 32-104°F and pressure range of 0-50 psig.

Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Feb 07, 2012 Available in 14 sizes/styles with precision-machined brass housing, OFP® Solder Barrier Receptacles are discrete sockets for through-hole soldering into printed circuit boards. Organic fibre plugs prevent solder, paste, or flux from contaminating internal contact during placing and soldering process. When device/mating lead is plugged into receptacle, OFP® is knocked out, allowing mating lead to pass through fingers of internal contact and make reliable electrical connection.

Specialized Products Company    Southlake, TX 76092
Feb 07, 2012 Available in Cat5, Cat5e, and Cat6 versions, TrueConect RJ-Type Modular Plug Connectors feature factory-polished contacts with 50 µm gold plating, making them suited for high-speed data transmissions. Units have 3 offset insulation displacement points, as well as primary and secondary strain relief design that doubles cable holding strength of terminated connector. Housed in thermoplastic, plugs allow for visual verification of wiring configurations.

ASCON Group    St. Petersburg   Russian Federation
Feb 07, 2012 Available with German localization, KOMPAS-3D v13 professional mechanical computer-aided design (MCAD) system offers multiple functions in 3D and 2D design processes as well as flexible collaboration with third-party software. Users can specify arrays from data in table, and several options are available for refining construction of curves. Additionally, surface analysis, auto balloon, several add-ins, and properties reporting capabilities enhance productivity.

Edwards Vacuum Technology    Wilmington, MA 01887
Feb 07, 2012 With ultimate vacuum typically down to 3.8 x 10^-4 Torr without purge, Models GXS450 and GXS750 deliver peak pumping speeds up to 435 cfm. When combined with booster pump, units offer speeds up to 1,978 cfm. Pump mechanism can be cleaned using high flow purge and solvent flush accessory, which removes need to partially strip pump. Fitted with controller as standard, pumps are suited for steel degassing and metallurgy processes, glass coating, solar coating, and LED manufacture.

Seaview    Lynnwood, WA 98087-1524
Feb 07, 2012 Purpose built for harsh marine environment, Modular Mounts secure electronics for optimized satellite reception and radar performance while underway. Units consist of anodized aluminum plate that is pre-drilled with several hole patterns. To allow for seamless look, UV stable white ABS plastic coating fills holes, creating dimple template for boaters or installers to drill only holes required. Mounts support closed radomes and open array radars as well as most satellite domes.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Feb 07, 2012 Trace Source(TM) Configurable Diffusion Tubes extend range of compounds that can be used to include subliming solids and viscous liquids. Removable reservoir allows filling with capillary removed, so component compound can be any consistency. Additionally, variety of pre-configured and tested capillaries can be interchangeably fitted to reservoir to adjust range of concentrations obtainable.

SAS Automation, Ltd.    Xenia, OH 45385
Feb 07, 2012 Used when sprues and runner systems do not stay on ejector pins after ejection from mold, GSZ Spring Loaded Sprue Plier Arm enables GRZ 20-16... Sprue/Part Pliers to absorb ejector stroke of mold. This inline spring arm has end ported for quick-touch pneumatic hose connectors and is available with clampable and threaded shafts. Latter includes jam nut and lock washers for plate mounting.

STMicroelectronics    Lexington, MA 02421
Feb 07, 2012 Supplied in 3 x 3 mm package, STOD13AS is produced using Silicon On Insulator process technology and integrates step-up and inverting DC/DC converters needed to generate positive and negative supplies on same chip. Immunity to cellphone communication noise produces consistent, flicker-free display, while Enable pin and pulse-skipping operation promote power conservation. Along with 85% typ efficiency, chip features 250 mA output current capability and 1.5 MHz operating frequency.

Lowell Corp.    West Boylston, MA 01583
Feb 07, 2012 As 2-stage tool, Porter-Ferguson SM0014T Mini Ram provides auto body repair shops versatility when tackling jobs such as straightening frame rails and motor mounts. Height is 2 5/16 in. with piston fully retracted, 3 5/6 in. with first stage extended, and 4 5/16 in. when fully extended. Built for rough duty, product has max capacity of 4 ton for stage 1 and 1 ton for stage 2. Drop-forged base gives tool stable footing, and angled port for minimizing hydraulic connection problems.

DigitalPersona, Inc.    Redwood City, CA 94063
Feb 07, 2012 DigitalPersona® Pro Enterprise lets organizations mix and match different ways of securely identifying themselves to MS Windows® and applications, from PINs, passwords, and smartcards to biometrics, contactless proximity cards, and Bluetooth® phones. Managed from Active Directory, solution addresses mandates for strong authentication and protected access to sensitive information. Specifically, functionality covers ability to define, deploy, enforce, and report upon authentication policies.

Fluke Corp.    Everett, WA 98203
Feb 07, 2012 Fluke® 700G Series Precision Pressure Test Gauges can measure -14 to 15 psi with resolution of 0.001 psi (model 700G04) to -14 to 10,000 psi with 1 psi resolution (model 700G31) with 0.05% total measurement uncertainty for one year. Equipped with backlit display, instruments can log up to 8,493 pressure measurements when used in conjunction with 700G/TRACK software and feature ¼ in. NPT to ¼ in. ISO adapter for connections. Products carry CSA and ATEX approvals.

Henkel Corporation    Rocky Hill, CT 06067
Feb 07, 2012 Designed for locking and sealing threaded fasteners, Loctite® 2400NA(TM) and 2700NA(TM) have MSDS health rating of 1 and are formulated to enhance occupational health and safety by eliminating allergic skin, CMR, and Prop 65 hazards. Loctite 2400NA Blue Threadlocker has medium-strength, general-purpose formulation intended for use on fasteners from ¼-¾ in. dia. Loctite 2700NA Red Threadlocker offers high-strength, general-purpose formulation for use on fasteners up to ¾ in. dia.

Aremco Products, Inc.    Valley Cottage, NY 10989
Feb 07, 2012 Consisting of unfilled, 100% solids epoxy system, Aremco-Bond(TM) 526N can be used continuously at temperatures to 570°F. Product features volume resistivity of 4.0 x 10¹⁴ W-cm, dielectric strength of 450 V/mil, and dielectric constant of 3.01 at 1.0 Hz. Flexural and tensile strengths are 16,000 and 2,800 psi, respectively. With 1:1 mix ratio, epoxy provides mixed viscosity of 4,000 cP and pot life of 2.5 hr. Product adheres to ceramics, glass, metals, and plastics substrates.

Omega Engineering, Inc.    Stamford, CT 06907
Feb 07, 2012 With complete control system design, series CNI-CB120SB eliminates need to select, collect, and assemble separate components. Preconfigured panels are ready to install, requiring only supply power, load, and sensor hook-up. In addition to OMEGA® iSeries microprocessor-based controller with on/off, PID, and ramp/soak capabilities, features include tri-color display, thermocouple input jack, and M12 female connection for RTD or process inputs.