Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 08, 2012 Available as plug-in module for Agilent 86100C/D DCA oscilloscopes, Agilent 86108B provides residual jitter below 50 fsec, channel bandwidths to 50 GHz, and clock recovery from 50 Mbps to 32 Gbps. Integrated instrumentation-grade clock recovery circuit allows module to trigger directly from single-ended or differential data signals, eliminating need for separate trigger input. Internal phase detector enables measurements of PLL bandwidth, jitter transfer, and jitter/phase noise spectrum.

CILS INTERNATIONAL    Beverly, MA 01915
Feb 08, 2012 Suited for electrical and electronic applications, CILS-9900 Labels feature permanent adhesion during extreme temperatures up to +388°C, offering heat-resistant product identification solution that conforms to environmental legislation, including RoHS, REACH, and WEE. Labels are printable from standard laser, inkjet, or thermal transfer printer. Coating ensures printed data remains clear and legible during exposure to chemicals/solvents, cleaning agents, and abrasion.

Wacker Chemical Corp.    Chino, CA 91710
Feb 08, 2012 Intended for household appliance, automotive, and electronics sectors, ELASTOSIL® N9111 single-component silicone rubber compound cures at room temperature in presence of atmospheric moisture to yield silicone with optimized heat resistance and mechanical properties. This alkoxy-curing RTV-1 system, formulated with tin-free catalyst, is fully compatible with platinum-catalyzed silicone products, even in uncured state. Cured rubber is resistant to UV light and temperatures up to 200°C.

Aculab    Milton Keynes MK1 1PT  United Kingdom
Feb 08, 2012 As scalable, on-demand platform as a service, Aculab Cloud accommodates users who do not have business-critical requirement to install, manage, and maintain on-site telephony hardware or software. Solution handles all management requirements of telephony platform, including fluctuating call volumes. Features include telephony APIs, international inbound PSTN and outbound PSTN services, play, record, TTS, conferencing for up to 400 parties, and live speaker/answering machine detection.

Amphenol Industrial Operations    Sidney, NY 13838
Feb 08, 2012 Intended for commercial- and utility-scale systems, active trunk and drop cabling solution is comprised of one major cable conductor with smaller cables connected to PV panel. Alternative to conventional DC wiring replaces typical trunk wiring design with pre-fabricated wire harness assembly, allowing for up to 40% more modules per string while reducing current requirements. Paired with ModLink junction box, solution also maximizes output of each module and recovers degradation losses.

Mini-Circuits    Brooklyn, NY 11235
Feb 08, 2012 With insertion loss of 0.3-0.9 dB above theoretical 3 dB limit and low passive intermodulation from 600 MHz to 6 GHz, 2-way 0° Model ZB2PD-63+ is suited for applications ranging from wireless LAN, cellular, and satellite networks to instrumentation, MMDC, and UHF TV. Surface mount Models TCP-2-33X+ and TCP-2-272+ also feature low insertion loss and optimal amplitude and phase unbalance, with wideband frequency ranges of 1-3 GHz and 5-2700 MHz, respectively.

Igus, Inc.    East Providence, RI 02914 0349
Feb 08, 2012 With polygon effect of 37 dB (A), abrasion- and wear-resistant System E6.1 Energy Chain® is modular and can be lengthened/shortened. Elastic polymer spring elements connect side parts of cable carriers to one another, preventing relative movements between joints, while crossbars swing open on both sides by 115° along inner and outer radius to accommodate cable installation/removal. Pretension can be adjusted by reversing inner link, and inner contour is smooth to extend cable/hose life.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Feb 07, 2012 FlexCessory(TM) stand secures and supports FlexFill(TM) single-use fluid transfer assemblies during use while also enabling one-handed liquid transfers. To facilitate aseptic fluid transfer, stand interfaces with FlexFill assembly inside of laminar flow hood. Fully adjustable stand accommodates FlexFill biocontainer assemblies from 500 mL to 6 L and can also store excess fluid for future dispensing.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Feb 07, 2012 Available as tripod or wall mounted spray package, MX Lite 12:1 features stainless steel MX412 Pump with AA1600M Air Assisted Airless Spray Gun. Magnetic detent design creates quick stroke changeover with no pulse or surge. Self-adjusting spring loaded packings have large sight glass for visual packing inspection. Delivering soft, fine spray, HVLP or LVMP air caps optimize transfer efficiency and finish. Flat, fine, and twist tips are available in wide range of sizes.

Thomas Research Products    Elmhurst, IL 60126
Feb 07, 2012 Available in leading edge (incandescent) and trailing edge (ELV) versions, LED20W series is comprised of constant current dimmable drivers designed for LED dimming control from 100%-10%. Standard 14, 16.8, and 20 W models, featuring 100-277 Vac input and 7-40 V output, come in IP66-rated Black Magic Thermal Advantage(TM) plastic enclosures. Intended for OEM luminaires, products are designed for indoor and outdoor, general and architectural lighting applications.

Absopulse Electronics, Ltd.    Carp, ON K0A1L0  Canada
Feb 07, 2012 Supplied 7 x 7 x 12 in., chassis-mount enclosure, BAP 1K-U7712 Series does not require any fans or forced air cooling. Each model contains 2 internal modules, each capable of generating 500 W min for inherent redundancy. Products may be connected in parallel, and version with 2 independent, fully regulated outputs of 500 W each is also possible. Inputs range from 48-250 Vdc, regulated outputs range from 24-125 Vdc, and efficiency, depending on I/O configuration, is 85% (min).

Calex Mfg. Co., Inc.    Concord, CA 94520
Feb 07, 2012 Powered by 115 Vac, 230 Vac, or 11-30 Vdc, Model 4800 has built-in excitation supply capable of delivering up to 120 mA at 10 V, more than enough to drive four 350 W load cells. Input is isolated from output and both are isolated from supply voltage, eliminating unwanted ground loop problems. Measuring 9.0 x 7.25 x 2.2 in., transmitter offers output options of 0-20 mA or 0-10 V and 4-20 mA or 2-10 V. Overall accuracy over room temperature is less than ±0.1% of FS.

Ema Design Automation    Rochester, NY 14623
Feb 07, 2012 By creating well-structured database for shared usage by entire engineering team, CIS QuickStart for OrCAD Capture CIS users ensures part uniformity across all designs. App provides predefined database schema and setup utility. Database is automatically populated ensuring that symbol, footprint, and part information is accurate and available for use in centralized library. Because database contains all relevant component information, BOMs are created automatically and with minimal errors.

Franklin Adhesives & Polymers    Columbus, OH 43207
Feb 07, 2012 Developed primarily to bond pleated glass or paper media to frames of air intake panel filters, FilterFAB 150 blends high viscosity and high solids into thick formula that sets instantly and remains flexible over time. Fiber-filled, vinyl acrylic copolymer sealant is safe to use, non-flammable, produces no harmful fumes, and contains no added formaldehyde. With added antimicrobial agents, product stays bacteria-free long after it has cured.

W. L. Gore & Associates, Inc.    Elkton,, MD 21921
Feb 07, 2012 Available in HDPE cartridge with 0.1 µm, 30 nm, and 20 nm retention ratings, GORE® PTFE Filters support fabrication of semiconductors and flat panel displays where optimum purity is critical. Combining low metal ion and organic extractables of all-HDPE cartridge, filters enable drop-in retention upgrade without sacrifice to existing system flow. PTFE membrane technology provides large, porous area available for fluid flow.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Feb 07, 2012 Utilizing replaceable electrode cartridges, MVS10 and MVS17 Ammonium pIon Sensors measure activity of free ammonium ions in solution in concentrations from 0.1-14,000 ppm over pH range from 2-8 pH. Model MVS10 consists of insertion- or immersion-style sensor for use in pipe tees, while Model MVS17 features valve-retractable design for insertion into pipe without interrupting process flow. Constructed of 316 SS, sensors operate over temperature range of 32-104°F and pressure range of 0-50 psig.

Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Feb 07, 2012 Available in 14 sizes/styles with precision-machined brass housing, OFP® Solder Barrier Receptacles are discrete sockets for through-hole soldering into printed circuit boards. Organic fibre plugs prevent solder, paste, or flux from contaminating internal contact during placing and soldering process. When device/mating lead is plugged into receptacle, OFP® is knocked out, allowing mating lead to pass through fingers of internal contact and make reliable electrical connection.

Specialized Products Company    Southlake, TX 76092
Feb 07, 2012 Available in Cat5, Cat5e, and Cat6 versions, TrueConect RJ-Type Modular Plug Connectors feature factory-polished contacts with 50 µm gold plating, making them suited for high-speed data transmissions. Units have 3 offset insulation displacement points, as well as primary and secondary strain relief design that doubles cable holding strength of terminated connector. Housed in thermoplastic, plugs allow for visual verification of wiring configurations.

ASCON Group    St. Petersburg   Russian Federation
Feb 07, 2012 Available with German localization, KOMPAS-3D v13 professional mechanical computer-aided design (MCAD) system offers multiple functions in 3D and 2D design processes as well as flexible collaboration with third-party software. Users can specify arrays from data in table, and several options are available for refining construction of curves. Additionally, surface analysis, auto balloon, several add-ins, and properties reporting capabilities enhance productivity.

Edwards Vacuum Technology    Wilmington, MA 01887
Feb 07, 2012 With ultimate vacuum typically down to 3.8 x 10^-4 Torr without purge, Models GXS450 and GXS750 deliver peak pumping speeds up to 435 cfm. When combined with booster pump, units offer speeds up to 1,978 cfm. Pump mechanism can be cleaned using high flow purge and solvent flush accessory, which removes need to partially strip pump. Fitted with controller as standard, pumps are suited for steel degassing and metallurgy processes, glass coating, solar coating, and LED manufacture.