UltraTech International, Inc.    Mentor, OH 44060
May 17, 2010 Installed in catch basin and held in place by drain's grate, Ultra-Drain Guard Oil & Sediment Plus® allows filters pollutants, hydrocarbons, and oil from water stream/storm water. Filter fabric is non-woven polypropylene, needle-punched, geotextile material, and unit is also equipped with filter strips makde of X-TEX®, which is made from recycled synthetic fibers and helps maximize amount of oil and hydrocarbons that can be removed.

Eaton Corporation    Raleigh, NC 27615
May 17, 2010 Available in fixed or drawout configurations, VCP-W line of circuit breakers have voltage range factor of K=1 and offer UL listed ratings up to 15 kV, 3,000 A, and 63 kA. They incorporate maintenance-free vacuum interrupters, which switch high stress current and require no cooling or ventilation systems. Designed for harsh industrial environments, product line also includes model VCP-WSE featuring cycloaliphatic epoxy insulation and ratings up to 15 kV, 3,000 A, and 50 kA.

Renishaw, Inc.    Hoffman Estates, IL 60192
May 14, 2010 Offering head touches for rapid touch-trigger measurement, Model PH20 provides infinite 5-axis positioning and integral TP20 probe mount that optimizes working volume of CMM, bringing 5-axis capability to smaller machines. Probe head minimizes CMM motion, reducing dynamic CMM errors. Able to determine head orientation and probe position in single operation, inferred calibration technique allows subsequent measurement at any head angle.

Kollmorgen Corp.    Radford, VA 24141
May 14, 2010 MOTIONEERING® v6.1.0 collects and saves axes load information, automatically calculates application results, and compares them against database of products to identify optimal linear or rotary motion system solutions for application at hand. In rotary applications, program can also sum effects of multiple axes of motion for properly sizing power supply and shunt regeneration. PDF generator, also included, creates complete report of application results.

Henkel Corporation    Rocky Hill, CT 06067
May 14, 2010 Able to cure in 120 seconds @ 110°C, less than 15 sec @ 130°C, or less than 10 sec @ 150°C, silver-filled Hysol ECCOBOND CA3556HF offers alternative to high-temperature solder processes. No-mix, one-part formula suits high-throughput production processes that dictate high peel strength, such as the assembly of PV modules, automotive sensors, and membrane switches that incorporate temperature-sensitive substrates. Also, stress minimization properties compensate for CTE mismatches.

EagleBurgmann Industries    Houston, TX 77040
May 14, 2010 Built on in-house SEPRO service software that maps seal data for systems and individual plant components, SEPROnet Online Software can be accessed in real-time from any web browser. By being able to view information about pump systems and seal functions, customers can maintain production schedules and streamline maintenance, while minimizing parts inventory. Program additionally offers automatic generation of fault reports and statistical analysis of failures and details of seal damage.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 14, 2010 Programmable using HART® Communication, Series 3200 Smart Pressure Transmitter is microprocessor-based and features flexible pressure calibration as well as pushbutton configuration. EEPROM stores configuration settings and stores sensor correction coefficients in event of shutdowns or power loss, and transmitter software compensates for thermal effects. FM approved for use in hazardous (classified) locations, product offers 100:1 rangeability to fit any application.

Paragon Software Systems, Inc.,    Dallas, TX 75240
May 14, 2010 Incorporated into transportation planning process, Paragon Resource Manager delivers view of trucks and drivers with their availability and capabilities. Resource-managed planning solution compiles data about all drivers and vehicles used by company, including availability and hours worked each day, enabling transportation managers to create Hours-of-Service compliant schedules with even workloads. By cataloging each vehicle type, program helps match most appropriate vehicle to specific job.

PA&E    Wenatchee, WA 98801
May 14, 2010 Combining all-aluminum construction with hermetic performance, aluminum Micro-D connector is compliant with MIL-PRF-83513 standards and can be mounted to aluminum electronic housing with laser welding or O-ring seal. It provides greater than 5,000 MW insulation resistance @ 500 Vdc and can be configured with 9, 15, 21, 25, 31, or 37 pin counts. Able to be laser welded into electronic package, product features contacts of beryllium copper CDA alloy finished in nickel/gold plating.

Westfalia Technologies, Inc.    York, PA 17402
May 14, 2010 Based on Microsoft .NET technology, Savanna.NET® v2.2 includes storage locator algorithm, which optimizes efficiency of storing and retrieving pallets and totes. Standard host interface controls items, orders, customers, and inventory segments of WMS, and provides standard integration of these segments to any ERP system, including SAP, Oracle, Navision, and Ross. In WMS Client, users can rename and reorganize columns, which allows them to sort inventory movement information as they prefer.

ON Semiconductor, LLC    Phoenix, AZ 85008
May 14, 2010 Synchronous rectification controller and driver IC, NCP4303A and NCP4303B, have maximum operating frequency of 500 kHz and turn-off delay time of 40 nsec typical. Model NCP4303A has fngate drive clamp of 12 V, while NCP4303B has 6 V gate drive clamp. Externally adjustable minimum on and off times control ringing induced by PCB layouts and other parasitic elements, providing low noise operation. NCP4303A and NCP4303B are offered in Pb−free, 8-pin SOIC packages.

Balluff, Inc.    Florence, KY 41042-0937
May 14, 2010 Available in 4 types, EdgeMaster sensors are suited for use with high speed automated equipment. BAV MA series offers fixed dual optical axis edge detection, while BGL C series is photo array sensor that gives proportional analog or dual discrete outputs with resolution of .08 mm. Projecting 150 mm line of light over edge against reflective tape, BOL 27 provides analog and discrete output. BGL 21 is suited for contrast mark or label detection in high speed web based applications.

CUI, Inc.    Tualatin, OR 97062
May 14, 2010 Measuring only 1.35 x 1.13 x 0.45 in., AMT203 outputs 12 bits of absolute position information using patented capacitive code generation system and on-board PIC 16F690 MCU that operates at up to 2 MHz. Encoder consumes 10 mA max at 5 Vdc, and is available with 9 mounting patterns and 10 bore size options. Device also provides non-magnetic index pulse and may be configured to output incremental position data after zero position is established to approach throughput of up to 10 MHz.

Endicott Research Group, Inc.    Endicott, NY 13761
May 14, 2010 Suited for solid state lighting (SSL) applications, fully isolated eDriver family power supplies offer universal input of 120, 220, and 277 V, power factor correction greater than 90%, and 0-10 V dimming options. Slim 100 W units are available in wide range of constant voltage and constant current models. Offered in custom versions, units have UL8750 and CE approvals and rating of IP67. Applications include cove and architectural lighting, and parking and street lights.

OSRAM Opto Semiconductor    San Jose, CA 95134
May 14, 2010 Designed for automotive applications such as driver and passenger monitoring systems and blind spot detection systems, IR DRAGON SFH 4236 features integrated lens that concentrates emitted IR light within viewing angle of ±20°, eliminating need for external lens assembly. Suited for reflow soldering, compact device emits at wavelength of 850 nm, and can also be used in camera-based vision systems for industrial and security sectors.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
May 14, 2010 Designed for maintenance and repair, as well as construction applications, Ranger® 305 LPG provides DC multi-process welding for general purpose stick, downhill pipe (stick), Touch Start TIG®, cored-wire, MIG (CO₂ and mixed gases), and arc gouging. It is rated at 25 V for 300 A of stick welding and also accommodates CV wire welding up to 5/64 in. dia electrodes. Machine provides 10,000 W peak single-phase AC power, and 9,000 W for continuous use, including power back-up.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 14, 2010 Model TPS54260 monolithic synchronous switcher is 2.5 A SWIFT(TM) converter with 200 mW high-side FET that provides up to 95% efficiency. Low ripple pulse skip mode reduces no load, regulated output supply current down to 138 µA and, when disabled, device draws 1.3 µA. Unit's switching frequency range is 100 kHz to 2.5 MHz, which is synchronized from master clock. Measuring 3 x 4.9 x 1 mm, IC includes power-good, enable, and tracking pins for sequencing.

Xilinx, Inc.    San Jose, CA 95124 3400
May 14, 2010 Xilinx ISE® Design Suite v12 includes intelligent clock-gating technology that reduces dynamic power consumption via automated analysis and logic slice optimization of FPGAs. It includes AMBA 4 AXI4-compliant IP support for plug-and-play design as well as interoperable design flows/tool configurations for logic, DSP, embedded processing, and system-level design. Program also enables partial reconfiguration of logic blocks without interrupting remaining logic.

Honeywell International, Inc.    Morristown, NJ 07960
May 14, 2010 Comprised of corded model 1900 and Bluetooth-enabled model 1902, Xenon(TM) series meets needs of healthcare, retail, manufacturing, postal/courier, and government workers. Adaptus® Imaging Technology 6.0 optimizes reading of various types of bar codes and also offers various image capture capabilities. In addition to custom sensor optimized for bar code reading, unit features SwiftDecoder® software for decoding damaged and hard-to-read bar codes.

Invensys Systems, Inc.    Foxboro, MA 02035
May 14, 2010 Integrating with plant systems, Wonderware IntelaTrac 4.0 enables clients to execute predefined procedures and strategic responses under changing environmental or business conditions, resulting in highly responsive, collaborative plant environment. Solution facilitates operational best practices, connecting mobile workers to enterprise asset management systems, equipment reliability systems, and process historians to deliver visibility into performance of equipment and assets.