GAO FiberOptics Inc.    Toronto   Canada
May 18, 2010 Equipped with 2 detachable InGaAs detectors, Model 820 identifies 1,550 nm calibrated wavelength signals as well as 800-1,700 nm wavelength signals. Portable, battery-powered device also displays transmission direction; detects bare fibers, closed packed fibers, and pigtails; and identifies signal frequencies of 270 kHz, 1 kHz, and 2 kHz. Using Macro bending technology, unit avoids disruption of network communications that would result from disconnecting fiber optic cable for testing.

Applied Processor & Measurement    East Amherst, NY 14051
May 18, 2010 Readily interfaced to PCs, PLCs, and control systems, Model 500 drives solenoid based devices with initial full-on pull-in pulse and then provides reduced power hold-in current via PMW output. Use can reduce overall current in existing on/off solenoid drive applications, reducing operating solenoid coil heat and extending coil life. Rotary switch adjustable peak time ranges from 5 msec to 5 sec, and adjustable high-frequency PWM hold duty cycle range is 90%-15%.

Electronic Display Applications, Inc.    Southampton, PA 18966
May 18, 2010 Utilizing Li-ion batteries enclosed in NEMA 4 enclosures, XLWatt Series is designed to power outdoor portable electronic equipment for extended periods of time. Units are available in 1,000, 2,000, and 3,000 W/H capacities with regulated 12, 24, and 48 Vdc outputs options. Equipped with integrated charging system, XLWatt Series is optionally available with customized connectors or cables and wall or pole mounting hardware.

Dana Corp.    Toledo, OH 43697
May 18, 2010 Featuring water-based chemistry, eco-friendly Victor Reinz® ThermoGlide 1000(TM) coating provides high-temperature sealing of gasoline and diesel engines. Coating is engineered with blend of high-temperature lubricants and adhesive, offering micro-sealing of metal substrates, preventing escape of gas between exhaust manifold and cylinder head.

Critical Environment Technologies    Delta, BC V4G1M3  Canada
May 18, 2010 With ability to sense dust, particulates, cigarette smoke, pollen, and fibers, YESDUST runs on internal rechargeable NiMh batteries providing approximately 5 hr of run time, or supplied wall adapter, providing continuous operation. Product is designed to be used with multi-sensor indoor air quality (IAQ) monitors. Measured readings are shown on LCD display and data logged to internal flash card of IAQ monitors.

VIA Technologies, Inc.    Taipei 231  Taiwan
May 17, 2010 Available in active and passive cooling configurations, VIA EPIA-M830 offers range of I/O and connectivity options that include VGA, RS-232, USB 2.0, PCIe x4, Mini-PCIe, LVDS, and DIO. Fanless 1.0 ot 1.3 GHz VIA Nano E-Series processor is complemented by VIA VX800 media system processor, providing DirectX9 integrated graphics, HD audio, and Gigabit networking. Board offers up to 2 GB DDR2 system memory, video acceleration for multiple formats, and VMR-capable HD video processor.

Munson Machinery Co., Inc.    Utica, NY 13503
May 17, 2010 Intended for applications where solids must be removed from slurries in high volumes, self-cleaning model 24RDS24 contains 24 in. dia x 24 in. long rotating cylinder constructed of wedgewire screen. Doctor blade scrapes sludge and debris collected on outside of cylinder, while an internal spray line dislodges particles blinding screen. Variable-speed unit is equipped with wedgewire screen in 7 orifice sizes from .010-.100 in., offering respective capacities from 200-930 gpm.

GL Communications Inc.    Gaithersburg, MD 20877
May 17, 2010 Useful for identifying traffic types at concentration point, DSX patch panel, or multiplexed facility, Protocol Identifier can detect ISDN, ATM, HDLC, MTP2, LAPD, SS7, PPP, GSM, GSM Abis, TRAU, and Frame Relay protocols. Graphical view displays timeslots and subchannels of identified protocols, while statistical view displays protocols with details of port, timeslots, and subchannels. With software, users can also log protocol detected with device and channel information into text file.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
May 17, 2010 Suited for cleaning carpeted areas, VacRide(TM) employs dual brushes, vacuum motors, and HEPA filters to provide optimal soil removal and dust containment, while ride-on platform increases productivity and reduces operator fatigue. The 28 in. vacuum deck has standard side broom, and both together provide 34 in. total cleaning path. Also available, quiet mode reduces operating sound level to 64 dBA so staff can clean without disturbing building occupants.

Microscan Systems, Inc.    Renton, WA 98057
May 17, 2010 Suited for machine vision boards, GigE solutions, and smart cameras, Visionscape® v4.1 provides blob analysis, OCR, OCV, barcode, vector, and edge algorithms, plus Intellifind pattern-matching tool. Color matching tool is suited for high-speed applications such as sorting parts, while color segmentation tool enables other tools to be applied in specific color plane. With Visionscape® v4.1, users can create custom user interfaces via VB.net and C#.

Balluff, Inc.    Florence, KY 41042-0937
May 17, 2010 Offered in PNP NO output configuration with micro connector, BunkerProx® self-bunkering M18 sensor has nominal range of 4.0 mm. Thickness of housing enhances ability to withstand repeated mechanical impact, while housing itself also serves as intermittent heat sink to shield sensor electroncs. Other protection features include frontal impact deflection ring, ceramic face resistant to melting and burn-through, slag-resistant coating, and weld-field immune electronics.

Stellar Technology, Inc.    Amherst, NY 14228
May 17, 2010 With standard output of 3 mV/V, Model GT100 delivers linearity and hysteresis of 0.25% across pressure ranges from 150-20,000 psig. Unit features cleanable pressure cavity, built-in overpressure protection, and stainless steel diaphragm, which can be replaced in field as needed. Thermal isolation ensures performance over operating temperature of -100 to +300°F. Compensated temperature range is -30 to +170°F, which can be extended to -65 to +250°F.

PPT Vision, Inc.    Eden Prairie, MN 55344
May 17, 2010 IMPACT® v9.1 comes with Pinpoint Pattern Find(TM) tool, which enables program to solve challenging applications - robotic guidance and high-speed inspection of randomly oriented, scaled, and located parts - with sub-pixel accuracy. While included Control Program Manager (CPM) empowers inspection designers to build custom GUI, Vision Program Manager (VPM) lets engineers design custom inspections without requiring any programming language.

Industrial Test Systems, Inc.    Rock Hill, SC 29730
May 17, 2010 Designed for field testing of potable water, eXact® LEADQuick(TM) Photometer detects 3-500 µ/L on site Lead levels in either water, soil, or paint with resolution of 1 µg/L and accuracy of ±3 µg/L. Mercury is detected at 10-600 µ/L with resolution of 1 µg/L and accuracy of ±6 µg/L, while Cadmium is detected at .01-.80 mg/L with .06 mg/L resolution. Suited for consumers and professionals, handheld photometer is waterproof and includes built-in sampling cell.

SICK, Inc.    Minneapolis, MN 55438
May 17, 2010 Suitable for product detection and machine positioning in packaging, Model V180-2 offers complementary light and dark operate outputs. Proximity version provides sensing ranges of 100, 400, or 800 mm, while through-beam version has range of 20 m, and reflex version has polarization filter, offering 4 m range in IP67 environmental conditions. Installed using bright red sender LED, sensor includes indication LEDs and translucent housing that allows 360° visibility.

Linear Technology Corp.    Milpitas, CA 95035
May 17, 2010 Operating with N-channel MOSFETs from input voltages of 4.5-38 V, Model LTC3829 can produce ±0.75% accurate output voltages from 0.6-5 V. Three-phase synchronous controller features PolyPhase® operation and differential output voltage sensing. Up to 6 phases can be paralleled and clocked out of phase to minimize input and output filtering requirements for applications up to 150 A. Operating from -40 to 125°C, IC offers fixed operating frequency from 250-770 kHz and 95% efficiency.

Komatsu America Corp.    Rolling Meadows, IL 60008
May 17, 2010 Suited for small- to mid-sized applications, PC78US-8 is powered by 55 hp Komatsu SAA4D95LE-5 engine and has 16,240 lb operating weight. Machine operating information is sent to secure website via wireless technology for analysis, and 5 working modes enable performance to be tailored to application. In addition to max digging height of 24 ft 11 in., specifications include max digging depth of 15 ft 5 in., arm crowd force of 7,760 lb, and bucket breakout force of 13,780 lb.

Thermo Fisher Scientific    Waltham, MA 02454
May 17, 2010 Multiskan FC is available with SkanIt® v3.0 software, which provides user with 8 interchangeable language options. Software also incorporates parallel line analysis function for testing efficacy of pharmaceutical compounds. With ready-made and downloadable sessions, interface facilitates assay setup for instrument control and data handling. Diverse calculations are also included, and measurement results can be analyzed via integral software or exported to MS Excel.

Garlock Equipment Co.    Plymouth, MN 55447
May 17, 2010 Compliant with OSHA regulation 1926.502(d), Cobra Lifelink(TM) enables 1 or 2 people can tie-off to when they are on elevated job site. Mobile anchorage system provides fall arrest for one worker and fall restraint for second. Able to fit into elevators and pickup trucks as well as through doorways, compact and modular design rolls to where it is needed. No anchorage to substrate is required, and if fall arrest occurs, claw located under unit penetrates substrate to securely hold cart.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 17, 2010 Used to measure pressure drop across filters, strainers, pumps, chillers, and heat exchangers, Series PTGD contains piston-sensing element and offers ranges from 0-5 to 0-150 psid. All models have over pressure rating of up to 3,000 or 6,000 psi, depending on body material, and all ranges are dual-scale (psid and bar) and provide ±2% FS accuracy. Products are available in aluminum or 316 stainless steel with standard in-line ¼ in. FNPT connections.